Best spacer size c6

Post by **SteveG** » Thu Sep 28, 2017 5:53 pm

I would like the wheels to come out a bit further to get a better stance. I don't want them to be poking out past the arches however. The car has 20" wheels and ceramics. Would 8mm all round give the desired effect ?

Any potential issues with the setup I have and spacers ?

Cheers
Steve

Post by **Pgj0hns0n** » Thu Sep 28, 2017 6:47 pm

I gone for 10mm on the front and 12mm on the rear - and 20mm drop all round on 20” rims.

would rather have 21”

Sent from my iPhone using Tapatalk

Post by **SteveG** » Thu Sep 28, 2017 7:06 pm

Nice,

Got any pics showing stance and wheel/Arch alignment please ?

Cheers

Post by **Farravi** » Sat Sep 30, 2017 11:45 am

I've got 30mm drop i believe after installing H&R springs and I'd like to install some spacers too with my 20"s with ceramics and idea what's the max I can go without destroying my tyres?

Sent from my iPad using Tapatalk

Post by **A20LEE** » Sat Sep 30, 2017 2:27 pm

Mines lowered 45mm and catches at the rear and on full lock at the front with no spacers, factory 20's

Post by **SR71** » Sat Oct 07, 2017 10:17 am

10mm all round on standard ride height 20" rims.

It will catch on the very odd occasion if the car has 3 or more people in it.

Post by **SteveG** » Sat Oct 07, 2017 7:28 pm

That is useful thanks. I have opted for 8mm. Hopefully will work and give the wider look I am hoping for.

Post by **c3nturi0n** » Thu Jun 14, 2018 1:53 pm

resurrecting this thread

... any issues if I wanted to do just the rear end (mainly thinking from 4x4 point of view/differentials etc)?

Cheers.

Post by **c3nturi0n** » Sun Oct 14, 2018 10:28 pm

Any hints?

Post by **Doug_RS6** » Wed Oct 17, 2018 7:16 am

Check how deep the lip on the hub is. If it's more than 8mm. You'll have issues with hubcebtric spacers. I'm trying 15mm and H&R springs. Will post later once fitted. Measuments say it should be fine.

Post by **c3nturi0n** » Wed Oct 17, 2018 11:13 am

hey Doug,

so with 15mm drop with H&R springs? are you planning to use any spacers?

Post by **Doug_RS6** » Wed Oct 17, 2018 4:05 pm

I'm trying 15mm spacers as thats the smallest I can get to fit over the hub.

Post by **c3nturi0n** » Wed Oct 17, 2018 5:04 pm

Cheers... i'm getting my Maxton kit next week and spacers are next on my agenda (with 12-15mm drop).

Post by **Doug_RS6** » Wed Oct 17, 2018 10:51 pm

You can fit smaller than 15mm spacers as long as they don't have a hubcentric lip. I think the absolute ideal would be around 13mm rear and 10mm front. Depends on tyre choice also. I'm planning to fit my springs this week/weekend. Spacers are currently on though.

Post by **c3nturi0n** » Thu Oct 18, 2018 11:31 am

Any suggestions where to source spacers from (that fit C6 RS's)?

RS246.com Forum :: The World's #1 Audi R, S and RS Enthusiast Community

Best spacer size c6

Best spacer size c6

Re: Best spacer size c6

Re: Best spacer size c6

Re: Best spacer size c6

Re: Best spacer size c6

Re: Best spacer size c6

Re: Best spacer size c6

Re: Best spacer size c6

Re: Best spacer size c6

Re: Best spacer size c6

Re: Best spacer size c6

Re: Best spacer size c6

Re: Best spacer size c6

Re: Best spacer size c6

Re: Best spacer size c6

Who is online