Tune2air device

Post by **Pgj0hns0n** » Mon Sep 18, 2017 8:04 pm

I've seen various threads on using these devices but it's not flashing blue when I connect it via the adapter cable.

Just updated the MMI to 5570 but it's still. It working. It's driving me bonkers as I stream everything.

Any help from anyone else whose encountered similar problems would be appreciated.

Thanks

Paul

Sent from my iPhone using Tapatalk

Post by **Jess** » Thu Sep 21, 2017 9:21 am

Hi Paul,

We use this cable, sometimes it takes a few minutes to show up on the media options screen. Once I had to disconnect and reconnect it. Always flashes however. Not sure what your problem is though.

Post by **Rs6c6NI** » Thu Sep 21, 2017 10:53 am

I tried it, everything you have done, apparently some cars it just doesn't work on. I sent mine back to amazon and got a refund.

Sent from my iPhone using Tapatalk

Post by **Pgj0hns0n** » Thu Sep 21, 2017 10:57 am

One thing I've noticed is some of the wma3000a models have a USB-c port as well as the adapter lead. The version I have has the USB-c port but I've just ordered one that doesn't have the USB port. Not sure if there's a difference. I'll let you know if there's any change

Sent from my iPhone using Tapatalk

Post by **ronaldmacdonald2017** » Thu Sep 21, 2017 8:05 pm

Daft question - but have you got it pushed in / connected fully?

Post by **Pgj0hns0n** » Thu Sep 21, 2017 8:23 pm

Fair question but if I press any harder I'll push the socket in plug into through the housing lol

Sent from my iPhone using Tapatalk

Post by **Pgj0hns0n** » Sun Sep 24, 2017 1:43 pm

Update - got Bluetooth working!!!! So here’s what I tried that got me to a successful Bluetooth connection:

- upgraded MMI to 5570
- tried wma3000a tune2air (with Audi adapter joined to it) - didn’t work
- tried a genuine 30pin Audi adapter to an old iPhone 5 - able to stream music through the MMI
- purchased BOVEE wma1000 Bluetooth adapter
- connects wma1000 to 30pin adapter lead - success!

Bluetooth started to flash - iphone7 instantly connected to the device - now can stream to MMI!

RESULT

Sent from my iPhone using Tapatalk

Post by **SteveG** » Sun Sep 24, 2017 9:35 pm

The cable connection I have does not flash. It stays lit blue all the time. Works fine.

Post by **Pgj0hns0n** » Mon Sep 25, 2017 5:16 am

Yes I should have also said once paired the light stays on blue.

Sent from my iPhone using Tapatalk

Post by **MNK** » Mon Sep 25, 2017 8:49 am

On my old 2010 RS6 I used AMI to Apple 30-pin lead (some £10 one off Amazon, not OEM), then Tune2Air, worked perfectly every time

Post by **Pgj0hns0n** » Mon Sep 25, 2017 9:24 am

Yep, exactly the same

Sent from my iPhone using Tapatalk

RS246.com Forum :: The World's #1 Audi R, S and RS Enthusiast Community

Tune2air device

Tune2air device

Re: Tune2air device

Re: Tune2air device

Re: Tune2air device

Re: Tune2air device

Re: Tune2air device

Re: Tune2air device

Re: Tune2air device

Re: Tune2air device

Re: Tune2air device

Re: Tune2air device

Who is online