Brakes
-
- 2nd Gear
- Posts: 131
- Joined: Fri Aug 07, 2015 10:35 am
Re: Brakes
If its any use, I last ordered a pair of discs from Germany on ebay using this seller; they are basically the OEM disc without the Audi stamping on it, I've had my pair on since August 2015 and they are still spot on. Good to keep the cost down on sacrificial parts
http://www.ebay.co.uk/itm/111624513214? ... EBIDX%3AIT
http://www.ebay.co.uk/itm/111624513214? ... EBIDX%3AIT
Esben Business IT Solutions - http://www.esben.co.uk
Esben Remapping - http://remap.esben.co.uk
2015 BMW X6 M50d (wife-transport, not allowed to touch )
2008 RS6 Avant Phantom Black - MRC Stage2 (ecu, tcu & 2nd cat bypass) 730 PS/1017 nm
2006 BMW 535d Pre-LCI - Stage 1 (340bhp)
2003 VW Polo 1.4Tdi (3pot shitbox) tuning project, was 73bhp, now 120bhp, aiming for 160bhp before it goes bang! (put in the bin)
Esben Remapping - http://remap.esben.co.uk
2015 BMW X6 M50d (wife-transport, not allowed to touch )
2008 RS6 Avant Phantom Black - MRC Stage2 (ecu, tcu & 2nd cat bypass) 730 PS/1017 nm
2006 BMW 535d Pre-LCI - Stage 1 (340bhp)
2003 VW Polo 1.4Tdi (3pot shitbox) tuning project, was 73bhp, now 120bhp, aiming for 160bhp before it goes bang! (put in the bin)
Re: Brakes
AH - thanks. I had seen this but just thought it was one disc. After seeing your post I realise I was being a tit and it's both discs, which will work nicely. Just need something like this for the rears now
Edit - had a bit of a search and they offer the rear discs as well. Will settle for that + Ferodo DS2500 pads all around. Thanks for the help everyone
Edit - had a bit of a search and they offer the rear discs as well. Will settle for that + Ferodo DS2500 pads all around. Thanks for the help everyone
Re: Brakes
Chaps, has anyone used BR Motorsport (http://br-motorsport.com) before as they're pricing the bells around £70 cheaper than Demon Tweaks etc
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Daytona Grey C6 RS6 Avant
Ebony Black C5 RS6 Plus - Gone
Ebony Black C5 RS6 Plus - Gone
Re: Brakes
Guys, I've been quoted £950 delivered for the AP discs and bells by the guys at BR and I'll probably end up going for them tbh.
Before I do though, I thought I'd see if anyone else wanted to get involved and see if I could get a deal for multiple purchases.
So, anyone interested?
Sent from my iPhone using Tapatalk
Before I do though, I thought I'd see if anyone else wanted to get involved and see if I could get a deal for multiple purchases.
So, anyone interested?
Sent from my iPhone using Tapatalk
Daytona Grey C6 RS6 Avant
Ebony Black C5 RS6 Plus - Gone
Ebony Black C5 RS6 Plus - Gone
-
- 1st Gear
- Posts: 72
- Joined: Sun Dec 25, 2016 2:16 pm
Re: Brakes
I would be interested to see if there is a chance of a mini group buylongman h wrote:Guys, I've been quoted £950 delivered for the AP discs and bells by the guys at BR and I'll probably end up going for them tbh.
Before I do though, I thought I'd see if anyone else wanted to get involved and see if I could get a deal for multiple purchases.
So, anyone interested?
Sent from my iPhone using Tapatalk
________________________________________________
RS6 C6 MTM Map Engine & Gearbox STAGE2
Re: Brakes
Sorry - one more question!
The DS2500 pads have no wear sensors - what have you guys done who've fitted them?
Thanks.
The DS2500 pads have no wear sensors - what have you guys done who've fitted them?
Thanks.
Re: Brakes
Chopped off the plug from the old OEM pads, shorted the two wires together, covered it in insulation tape and plugged in back into the loom near the top of the hub.
***OLD*** Daytona C5 RS6 Avant - MRC'd - 500HP & 820NM (PistonHeads Link).
***NEW*** Daytona C6 RS6 Avant - MRC'd - 955HP & 1200NM (PistonHeads Link)
***NEW*** Daytona C6 RS6 Avant - MRC'd - 955HP & 1200NM (PistonHeads Link)
Re: Brakes
Anyone known if the fixing bolts on AP 390mm discs go rusty? Just built mine up and considering lacquering them.
Re: Brakes
Any suggestions on pads ? Discs are fine
Sent from my iPhone using Tapatalk Pro
Sent from my iPhone using Tapatalk Pro
Re: Brakes
Any suggestions ? Thinking of Textar
Sent from my iPhone using Tapatalk Pro
Re: Brakes
I assume I have the correct product codes
Sent from my iPhone using Tapatalk Pro
Sent from my iPhone using Tapatalk Pro
Re: Brakes
Mine had a tiny amount of surface rust after a year but a wipe with a wd40 covered cloth got rid of it.
***OLD*** Daytona C5 RS6 Avant - MRC'd - 500HP & 820NM (PistonHeads Link).
***NEW*** Daytona C6 RS6 Avant - MRC'd - 955HP & 1200NM (PistonHeads Link)
***NEW*** Daytona C6 RS6 Avant - MRC'd - 955HP & 1200NM (PistonHeads Link)
Re: Brakes
Graham - As you're looking at Rear Pads in the pic above then OEM/Pagid are fine and a little cheaper than the Textar ones. For front pads mine had Textar fitted by the previous owner and they were awful at high speed braking but adequate for A6 style driving as well as being dust/squeal free but personally I would't use them.
***OLD*** Daytona C5 RS6 Avant - MRC'd - 500HP & 820NM (PistonHeads Link).
***NEW*** Daytona C6 RS6 Avant - MRC'd - 955HP & 1200NM (PistonHeads Link)
***NEW*** Daytona C6 RS6 Avant - MRC'd - 955HP & 1200NM (PistonHeads Link)
Who is online
Users browsing this forum: Google Adsense [Bot] and 96 guests