new turbos

5.0 V10 50v biturbo - 571 bhp
Post Reply
tony091
1st Gear
Posts: 50
Joined: Tue Aug 11, 2015 9:23 pm

new turbos

Post by tony091 » Fri May 20, 2016 9:16 am

hi chaps
anyone know how much 2 new turbos would be fitted, and the best place to have them done. regards tony
I think ian has just changed his ??

User avatar
Farravi
3rd Gear
Posts: 305
Joined: Sun May 31, 2015 5:48 pm

Re: new turbos

Post by Farravi » Fri May 20, 2016 9:31 am

Refurbished stock turbos or uprated Hybrid turbos?

tony091
1st Gear
Posts: 50
Joined: Tue Aug 11, 2015 9:23 pm

Re: new turbos

Post by tony091 » Fri May 20, 2016 9:50 am

either I think my seals might be leaking ? do you have a costing on both ? regards tony

User avatar
IanH755
Top Gear
Posts: 1988
Joined: Thu Jan 02, 2014 12:50 pm
Location: Stoke and Norfolk

Re: new turbos

Post by IanH755 » Fri May 20, 2016 9:55 am

Labour is around £2k to drop the engine/GB. For the turbo's I think these are the ones most known about -

£1300 for Turbo Dynamics which flow 830hp and used by MRC for their 800+ spec.
£1800 for TTH 850+ which flow 850+ but I don't anyone with these in the UK but seem popular in Europe.
£2000 for TTE 850+ which are 900+ proven.
£??? for classba 9XX spec which are 900+ proven.

Refurb - Not sure on price to be honest.
***OLD*** Daytona C5 RS6 Avant - MRC'd - 500HP & 820NM (PistonHeads Link).

***NEW*** Daytona C6 RS6 Avant - MRC'd - 955HP & 1200NM (PistonHeads Link)

tony091
1st Gear
Posts: 50
Joined: Tue Aug 11, 2015 9:23 pm

Re: new turbos

Post by tony091 » Fri May 20, 2016 10:07 am

cheers ian
wheres best place to be done MRC ?? or know of others ? regards

User avatar
Farravi
3rd Gear
Posts: 305
Joined: Sun May 31, 2015 5:48 pm

new turbos

Post by Farravi » Fri May 20, 2016 4:44 pm

Turbo Works is where I went to get mine refurbished and they were in battered condition when I sent it to them, but when they came back I was surprised as they looked brand new with the red and plastic packaging/seals. Very professional and so far no issues with the turbos. I dare say he's hell of lot cheaper than most places. The chap there is called Bartek. http://Www.turboworks.co.uk, call him for prices but I recall it was well under £1k for both turbo's.

Trups
Trader (Expired)
Posts: 1316
Joined: Sat Jun 09, 2012 8:38 pm

Re: new turbos

Post by Trups » Fri May 20, 2016 6:43 pm

Go to RE performance in Swindon for fitting.
Phantom Black C6 RS6 - ex Classba battleship
Mugello C6 RS6 5.0 TFSi AVANT - Gone.

If you have any quieries for interior or exterior LED's then get in touch.

User avatar
IanH755
Top Gear
Posts: 1988
Joined: Thu Jan 02, 2014 12:50 pm
Location: Stoke and Norfolk

Re: new turbos

Post by IanH755 » Fri May 20, 2016 7:32 pm

tony091 wrote:wheres best place to be done MRC ?? or know of others ? regards
There's plenty of extremely good garages around the UK will do a fantastic job of swapping the turbos for OEM units and will do it for less. I'd only use MRC if you were getting bigger turbos and getting it mapped (which MRC are the best in the UK at) and didn't want the hassle of low-loading your car to them for the mapping if you had the turbos fitted by someone else.

I'd also recommend Ricky at REPerformance in Swindon or Grizz at Unit20 in Ellesmere Port but if you tell us where you are in the UK it'll help.
***OLD*** Daytona C5 RS6 Avant - MRC'd - 500HP & 820NM (PistonHeads Link).

***NEW*** Daytona C6 RS6 Avant - MRC'd - 955HP & 1200NM (PistonHeads Link)

tony091
1st Gear
Posts: 50
Joined: Tue Aug 11, 2015 9:23 pm

Re: new turbos

Post by tony091 » Sun May 22, 2016 7:18 am

cheers fellas

turboworks
Neutral
Posts: 2
Joined: Thu Feb 02, 2023 9:56 am
Location: Eastbourne
Contact:

Re: new turbos

Post by turboworks » Thu Feb 02, 2023 10:02 am

Farravi wrote:
Fri May 20, 2016 4:44 pm
Turbo Works is where I went to get mine refurbished and they were in battered condition when I sent it to them, but when they came back I was surprised as they looked brand new with the red and plastic packaging/seals. Very professional and so far no issues with the turbos. I dare say he's hell of lot cheaper than most places. The chap there is called Bartek. http://Www.turboworks.co.uk, call him for prices but I recall it was well under £1k for both turbo's.
Thank you Farravi, If turbos are involved, I'm always happy to help.
If turbos are involved, I can help. - Turbo reconditioning

Post Reply

Return to “RS6 / RS6 Plus (C6 Typ 4F) 2008-2010”

Who is online

Users browsing this forum: No registered users and 143 guests