Bump - anyone know anything about this?Ungjaevel wrote:I read on a sale ad that someone had an aluminum BOV made by Forge. I can't find it on their page.
Also reading the "BOV and boost pressure" thread, referring to Forge BOVs...
Thinking for further upgrade / TTE850.
Forge Motorsport Silicone Hoses
Re: Forge Motorsport Silicone Hoses
Hello from Sweden/Philippines. My IKEA geschwindigkeitwagen! (766 hp / 571 kW / 1051 Nm), MRC'd, 22" forged, 'ramix, Milltek, ILR carbon bits, MTM adjustable springs.
Re: Forge Motorsport Silicone Hoses
Give Forge a ring/message they'll be able to inform you if they have made the valve or not.
2014 Mercedes E63 AMG S
Wrapped in OceanShimmerBlue | MSL Stage 2 – 736Bhp/876ibft | Weistec Downpipes | K&N Large Filters | 400mm AP Racing Fronts/DS2500 Pads | Centre delete | H&R Springs/Link bars 30mm |
Gone but not forgotten
2010 Nissan GT-R SVM 680R
2010 RS6 C6 Avant Stage 2 730/1088nm
Wrapped in OceanShimmerBlue | MSL Stage 2 – 736Bhp/876ibft | Weistec Downpipes | K&N Large Filters | 400mm AP Racing Fronts/DS2500 Pads | Centre delete | H&R Springs/Link bars 30mm |
Gone but not forgotten
2010 Nissan GT-R SVM 680R
2010 RS6 C6 Avant Stage 2 730/1088nm
-
- 2nd Gear
- Posts: 131
- Joined: Fri Aug 07, 2015 10:35 am
Re: Forge Motorsport Silicone Hoses
just to add something to this, spoke to Forge the other day and they said they were no longer producing the hose set due to low demand. I have however gone via a chap on ebay that has them listed, he has confirmed that the factory will make a set, its going to be about 4-6 weeks and only in blue but I can have some so going for it.
https://www.ebay.co.uk/itm/302259971058
In addition have just bought a set of forge recirc valves as had one bank go last year and I think the other is going now as feel down on power and have occasional wobbly boost. Have swapped the green spring for the yellow to deal with the above-stock boost levels of the MRC stage2 tune so will see how we get on Frankenstein-ing them onto the bottom of the airbox
https://www.forgemotorsport.co.uk/Valve ... --826.html
https://www.ebay.co.uk/itm/302259971058
In addition have just bought a set of forge recirc valves as had one bank go last year and I think the other is going now as feel down on power and have occasional wobbly boost. Have swapped the green spring for the yellow to deal with the above-stock boost levels of the MRC stage2 tune so will see how we get on Frankenstein-ing them onto the bottom of the airbox
https://www.forgemotorsport.co.uk/Valve ... --826.html
Esben Business IT Solutions - http://www.esben.co.uk
Esben Remapping - http://remap.esben.co.uk
2015 BMW X6 M50d (wife-transport, not allowed to touch )
2008 RS6 Avant Phantom Black - MRC Stage2 (ecu, tcu & 2nd cat bypass) 730 PS/1017 nm
2006 BMW 535d Pre-LCI - Stage 1 (340bhp)
2003 VW Polo 1.4Tdi (3pot shitbox) tuning project, was 73bhp, now 120bhp, aiming for 160bhp before it goes bang! (put in the bin)
Esben Remapping - http://remap.esben.co.uk
2015 BMW X6 M50d (wife-transport, not allowed to touch )
2008 RS6 Avant Phantom Black - MRC Stage2 (ecu, tcu & 2nd cat bypass) 730 PS/1017 nm
2006 BMW 535d Pre-LCI - Stage 1 (340bhp)
2003 VW Polo 1.4Tdi (3pot shitbox) tuning project, was 73bhp, now 120bhp, aiming for 160bhp before it goes bang! (put in the bin)
Re: Forge Motorsport Silicone Hoses
hi,RS6-T28RPH wrote: ↑Wed May 16, 2018 2:16 pmjust to add something to this, spoke to Forge the other day and they said they were no longer producing the hose set due to low demand. I have however gone via a chap on ebay that has them listed, he has confirmed that the factory will make a set, its going to be about 4-6 weeks and only in blue but I can have some so going for it.
https://www.ebay.co.uk/itm/302259971058
In addition have just bought a set of forge recirc valves as had one bank go last year and I think the other is going now as feel down on power and have occasional wobbly boost. Have swapped the green spring for the yellow to deal with the above-stock boost levels of the MRC stage2 tune so will see how we get on Frankenstein-ing them onto the bottom of the airbox
https://www.forgemotorsport.co.uk/Valve ... --826.html
kind of resurrecting this thread... was wondering if you ever get to the bottom of it?
2008 RS6 Avant (Monza Silver)
- Stage II MRC tune with gearbox (720PS/850Nm)
- MIJ Powerflow exhaust (non-res)
- H&R ARBs
- Stage II MRC tune with gearbox (720PS/850Nm)
- MIJ Powerflow exhaust (non-res)
- H&R ARBs
-
- 2nd Gear
- Posts: 131
- Joined: Fri Aug 07, 2015 10:35 am
Re: Forge Motorsport Silicone Hoses
no such luck i'm afraid, bit of a nuisance as was hoping to get them fitted on the last round of maintenance when we fitted the forge dv kit.
i suspect next steps are to approach forge to see if they will do a limited production run based on a minimum order quantity. last time I spoke to them they were not that accomodating to be honest but no harm in having a punt!
will update this thread as and when I have some info.
cheers,
rich
i suspect next steps are to approach forge to see if they will do a limited production run based on a minimum order quantity. last time I spoke to them they were not that accomodating to be honest but no harm in having a punt!
will update this thread as and when I have some info.
cheers,
rich
Esben Business IT Solutions - http://www.esben.co.uk
Esben Remapping - http://remap.esben.co.uk
2015 BMW X6 M50d (wife-transport, not allowed to touch )
2008 RS6 Avant Phantom Black - MRC Stage2 (ecu, tcu & 2nd cat bypass) 730 PS/1017 nm
2006 BMW 535d Pre-LCI - Stage 1 (340bhp)
2003 VW Polo 1.4Tdi (3pot shitbox) tuning project, was 73bhp, now 120bhp, aiming for 160bhp before it goes bang! (put in the bin)
Esben Remapping - http://remap.esben.co.uk
2015 BMW X6 M50d (wife-transport, not allowed to touch )
2008 RS6 Avant Phantom Black - MRC Stage2 (ecu, tcu & 2nd cat bypass) 730 PS/1017 nm
2006 BMW 535d Pre-LCI - Stage 1 (340bhp)
2003 VW Polo 1.4Tdi (3pot shitbox) tuning project, was 73bhp, now 120bhp, aiming for 160bhp before it goes bang! (put in the bin)
Re: Forge Motorsport Silicone Hoses
Cheers Rich... i noticed that KWE's are readily available for C6.RS6-T28RPH wrote: ↑Sat Mar 30, 2019 10:39 amno such luck i'm afraid, bit of a nuisance as was hoping to get them fitted on the last round of maintenance when we fitted the forge dv kit.
i suspect next steps are to approach forge to see if they will do a limited production run based on a minimum order quantity. last time I spoke to them they were not that accomodating to be honest but no harm in having a punt!
will update this thread as and when I have some info.
cheers,
rich
Do you happen to know what is the best source to get them from (with discounts in mind) ? or should i simply get them from their Ger website (~240GBP delivered)?
Thx.
2008 RS6 Avant (Monza Silver)
- Stage II MRC tune with gearbox (720PS/850Nm)
- MIJ Powerflow exhaust (non-res)
- H&R ARBs
- Stage II MRC tune with gearbox (720PS/850Nm)
- MIJ Powerflow exhaust (non-res)
- H&R ARBs
Who is online
Users browsing this forum: No registered users and 135 guests