Basic Servicing Procedures for the C6 RS6
Basic Servicing Procedures for the C6 RS6
Hi all,
I've created a bunch of basic servicing procedures (or workshop guides) from the Audi Techs manual. I'll add a few more to this thread as I create them (spark plugs etc).
They're all in PDF form and *only* the procedures are included, there are no part numbers included for the bits that need replacing. This is to prevent people buying the wrong parts if the part number changes in future.
For Part Numbers I'd use ETKA Online (free) but there are other websites out there.
C6_RS6_Engine_Oil_Change
C6_RS6_Replace_Air_Filters
C6_RS6_Replace_Pollen_Filter
C6_RS6_Replace_Fuel_Filter
C6_RS6_Gearbox_Maintenance_Procedures
C6_RS6_Front_Steel_Brakes
C6_RS6_Front_Ceramic_Brakes
C6_RS6_Rear_Ceramic_&_Steel_Brake_Pads
C6_RS6_Replace_Spark_Plugs
C6_RS6_Fit_Remove_Front_Bumper
C6_RS6_Replace_Headlight_Bulbs
C6_RS6_Suspension_Torque_Figures
I've created a bunch of basic servicing procedures (or workshop guides) from the Audi Techs manual. I'll add a few more to this thread as I create them (spark plugs etc).
They're all in PDF form and *only* the procedures are included, there are no part numbers included for the bits that need replacing. This is to prevent people buying the wrong parts if the part number changes in future.
For Part Numbers I'd use ETKA Online (free) but there are other websites out there.
C6_RS6_Engine_Oil_Change
C6_RS6_Replace_Air_Filters
C6_RS6_Replace_Pollen_Filter
C6_RS6_Replace_Fuel_Filter
C6_RS6_Gearbox_Maintenance_Procedures
C6_RS6_Front_Steel_Brakes
C6_RS6_Front_Ceramic_Brakes
C6_RS6_Rear_Ceramic_&_Steel_Brake_Pads
C6_RS6_Replace_Spark_Plugs
C6_RS6_Fit_Remove_Front_Bumper
C6_RS6_Replace_Headlight_Bulbs
C6_RS6_Suspension_Torque_Figures
Last edited by IanH755 on Mon May 15, 2017 10:44 pm, edited 6 times in total.
***OLD*** Daytona C5 RS6 Avant - MRC'd - 500HP & 820NM (PistonHeads Link).
***NEW*** Daytona C6 RS6 Avant - MRC'd - 955HP & 1200NM (PistonHeads Link)
***NEW*** Daytona C6 RS6 Avant - MRC'd - 955HP & 1200NM (PistonHeads Link)
Re: Basic Servicing Procedures for the C6 RS6
Kudos to you Sir
Re: Basic Servicing Procedures for the C6 RS6
Thanks for that Ian!
Which oil is recommended? Brand and spec?
I always used Shell Helix in my B5 and everyone that heard it said it was on of the nicest sounding 2.7 engines they'd heard. Thinking of using the same in the C6
Which oil is recommended? Brand and spec?
I always used Shell Helix in my B5 and everyone that heard it said it was on of the nicest sounding 2.7 engines they'd heard. Thinking of using the same in the C6
Re: Basic Servicing Procedures for the C6 RS6
I have used quantum seems to be fine good quality oil and its cheap !
c6 rs6 avant- mrc stage 2 -current
bmw e61 m5 saloon
s3 8p stage 2
vw bora tdi hybrid turbo
bmw e61 m5 saloon
s3 8p stage 2
vw bora tdi hybrid turbo
Re: Basic Servicing Procedures for the C6 RS6
This should be a Sticky! something that should have been done ages ago! thanks Ian!
2014 Mercedes E63 AMG S
Wrapped in OceanShimmerBlue | MSL Stage 2 – 736Bhp/876ibft | Weistec Downpipes | K&N Large Filters | 400mm AP Racing Fronts/DS2500 Pads | Centre delete | H&R Springs/Link bars 30mm |
Gone but not forgotten
2010 Nissan GT-R SVM 680R
2010 RS6 C6 Avant Stage 2 730/1088nm
Wrapped in OceanShimmerBlue | MSL Stage 2 – 736Bhp/876ibft | Weistec Downpipes | K&N Large Filters | 400mm AP Racing Fronts/DS2500 Pads | Centre delete | H&R Springs/Link bars 30mm |
Gone but not forgotten
2010 Nissan GT-R SVM 680R
2010 RS6 C6 Avant Stage 2 730/1088nm
- Shinobi675
- 5th Gear
- Posts: 1367
- Joined: Thu Sep 04, 2014 9:04 pm
Re: Basic Servicing Procedures for the C6 RS6
Sticky!
Plus... I love your front page! You are now a legend!
Plus... I love your front page! You are now a legend!
996 C4S, B8 RS4, CBR600RR & a little ZXR400
Re: Basic Servicing Procedures for the C6 RS6
Glad to help!
My Website - Someone with less morals than myself suggested removing the "Identity confusion" text and instead putting a "9/11 find the truth" donation link on the page just to see if I could make a bit of cash from those looking for my namesake.
I even got an e-mail last month sent to my admin account from the tour company he used in '09 whilst he was promoting his book asking I was thinking about touring again. I was so tempted to sign up for a 1 man show
My Website - Someone with less morals than myself suggested removing the "Identity confusion" text and instead putting a "9/11 find the truth" donation link on the page just to see if I could make a bit of cash from those looking for my namesake.
I even got an e-mail last month sent to my admin account from the tour company he used in '09 whilst he was promoting his book asking I was thinking about touring again. I was so tempted to sign up for a 1 man show
***OLD*** Daytona C5 RS6 Avant - MRC'd - 500HP & 820NM (PistonHeads Link).
***NEW*** Daytona C6 RS6 Avant - MRC'd - 955HP & 1200NM (PistonHeads Link)
***NEW*** Daytona C6 RS6 Avant - MRC'd - 955HP & 1200NM (PistonHeads Link)
- Shinobi675
- 5th Gear
- Posts: 1367
- Joined: Thu Sep 04, 2014 9:04 pm
Re: Basic Servicing Procedures for the C6 RS6
You have to do it! That's a great idea!
996 C4S, B8 RS4, CBR600RR & a little ZXR400
Re: Basic Servicing Procedures for the C6 RS6
Just read your site too... thats hillarious, i didnt even know or think to link your shared name until you pointed it out!
2014 Mercedes E63 AMG S
Wrapped in OceanShimmerBlue | MSL Stage 2 – 736Bhp/876ibft | Weistec Downpipes | K&N Large Filters | 400mm AP Racing Fronts/DS2500 Pads | Centre delete | H&R Springs/Link bars 30mm |
Gone but not forgotten
2010 Nissan GT-R SVM 680R
2010 RS6 C6 Avant Stage 2 730/1088nm
Wrapped in OceanShimmerBlue | MSL Stage 2 – 736Bhp/876ibft | Weistec Downpipes | K&N Large Filters | 400mm AP Racing Fronts/DS2500 Pads | Centre delete | H&R Springs/Link bars 30mm |
Gone but not forgotten
2010 Nissan GT-R SVM 680R
2010 RS6 C6 Avant Stage 2 730/1088nm
Re: Basic Servicing Procedures for the C6 RS6
Do you have to use an extractor to remove the old oil?
-
- Neutral
- Posts: 25
- Joined: Sun Feb 28, 2016 12:28 am
- Location: Oslo, Norway
Re: Basic Servicing Procedures for the C6 RS6
The extractor is used to suck out the reamining in the oil can in the engine bay. Approx. 1-1,5L.
Later RS6's also have a drain plug for the chaindrive at the rear of the engine, additional 1,5L of oil can be drained here.
Great pdf's! Thanks!
Later RS6's also have a drain plug for the chaindrive at the rear of the engine, additional 1,5L of oil can be drained here.
Great pdf's! Thanks!
2013 Audi Q7 3.0 TDI - Family car
2008 Audi RS6 Avant V10 TFSI - Phantom black, ceramics, ACC, softclose, 21" MTM, MTM springs, MTM Cat back.
2003 VW Bora 1.9TDI Highline - Daily beater
1991 VW Golf cabriolet G60 & 1963 Ragtop T1 beetle, forever lasting project (started in 1998)
X 2007 Audi S8 V10 // 1998 Audi A6 2.5TDI Quattro // 2001 Audi RS4 MTM // 2000 Audi A6 2,7 BiTurbo Avant // 1996 Audi RS2 // 1991 Passat Syncro G60 Turbo
2008 Audi RS6 Avant V10 TFSI - Phantom black, ceramics, ACC, softclose, 21" MTM, MTM springs, MTM Cat back.
2003 VW Bora 1.9TDI Highline - Daily beater
1991 VW Golf cabriolet G60 & 1963 Ragtop T1 beetle, forever lasting project (started in 1998)
X 2007 Audi S8 V10 // 1998 Audi A6 2.5TDI Quattro // 2001 Audi RS4 MTM // 2000 Audi A6 2,7 BiTurbo Avant // 1996 Audi RS2 // 1991 Passat Syncro G60 Turbo
Re: Basic Servicing Procedures for the C6 RS6
Can you change the oil without an extractor. Remove the drainplugs, drain the oil and refill? Just want to do an interim oil change between services. I've always changed my oil every six months.Quattro_RS6 wrote:The extractor is used to suck out the reamining in the oil can in the engine bay. Approx. 1-1,5L.
Later RS6's also have a drain plug for the chaindrive at the rear of the engine, additional 1,5L of oil can be drained here.
Great pdf's! Thanks!
-
- Neutral
- Posts: 25
- Joined: Sun Feb 28, 2016 12:28 am
- Location: Oslo, Norway
Re: Basic Servicing Procedures for the C6 RS6
Yes, you can, but you will be leaving 1L of oil that you could have changed out by buying a really cheap, manually suction pump
2013 Audi Q7 3.0 TDI - Family car
2008 Audi RS6 Avant V10 TFSI - Phantom black, ceramics, ACC, softclose, 21" MTM, MTM springs, MTM Cat back.
2003 VW Bora 1.9TDI Highline - Daily beater
1991 VW Golf cabriolet G60 & 1963 Ragtop T1 beetle, forever lasting project (started in 1998)
X 2007 Audi S8 V10 // 1998 Audi A6 2.5TDI Quattro // 2001 Audi RS4 MTM // 2000 Audi A6 2,7 BiTurbo Avant // 1996 Audi RS2 // 1991 Passat Syncro G60 Turbo
2008 Audi RS6 Avant V10 TFSI - Phantom black, ceramics, ACC, softclose, 21" MTM, MTM springs, MTM Cat back.
2003 VW Bora 1.9TDI Highline - Daily beater
1991 VW Golf cabriolet G60 & 1963 Ragtop T1 beetle, forever lasting project (started in 1998)
X 2007 Audi S8 V10 // 1998 Audi A6 2.5TDI Quattro // 2001 Audi RS4 MTM // 2000 Audi A6 2,7 BiTurbo Avant // 1996 Audi RS2 // 1991 Passat Syncro G60 Turbo
Re: Basic Servicing Procedures for the C6 RS6
I'll buy a little pump, just a bit wary of sticking any thing in the sump! Its only an interim oil change, the car will be going to Unit20 in May or August for a service anyway. Just like to do the oil every 2-3k milesQuattro_RS6 wrote:Yes, you can, but you will be leaving 1L of oil that you could have changed out by buying a really cheap, manually suction pump
Who is online
Users browsing this forum: No registered users and 57 guests