5.0 V10 50v biturbo - 571 bhp
-
IanH755
- Top Gear
- Posts: 2071
- Joined: Thu Jan 02, 2014 12:50 pm
- Location: Stoke and Norfolk
Post
by IanH755 » Sat May 25, 2019 1:56 pm
The Gearbox speed sensor runs out of input resolution at 217mph so the display can't show greater than that but the needle should still be able to move.
As calculated, a 7k rpm limit in 6th gear on stock tyres etc would make for a 250mph top speed limit, should you have the power, distance to ever do this -

-
Ads50
- 1st Gear
- Posts: 75
- Joined: Sat Apr 27, 2019 7:06 am
Post
by Ads50 » Sat May 25, 2019 2:44 pm
Pretty incredible really

not many cars can do that!
Sent from my iPhone using Tapatalk
-
don0301
- 4th Gear
- Posts: 770
- Joined: Wed Aug 13, 2014 3:39 pm
Post
by don0301 » Sat May 25, 2019 2:49 pm
IanH755 wrote: ↑Sat May 25, 2019 1:56 pm
The Gearbox speed sensor runs out of input resolution at 217mph so the display can't show greater than that but the needle should still be able to move.
As calculated, a 7k rpm limit in 6th gear on stock tyres etc would make for a 250mph top speed limit, should you have the power, distance to ever do this -
Hi Ian
I'm sure I've seen vids of the display 370kmh+, well over 217mph
Ferrari 296 GTB
992 Turbo S
Ferrari 488 Spider
C6 RS6
E46 M3 convertible
Nissan 200sx mk 2
Vauxhall Senator
Ford Sierra 1.8LX
Peugeot 205 1.9 GTi
Vauxhall Belmont SRi
Vauxhall Astra 1.3
Vauxhall Astra 1.3
1st car Datsun 120 FII Lime green....yeah

-
c3nturi0n
- 3rd Gear
- Posts: 467
- Joined: Tue May 29, 2018 10:50 am
Post
by c3nturi0n » Sun May 26, 2019 10:29 am
IanH755 wrote: ↑Sat May 25, 2019 1:56 pm
The Gearbox speed sensor runs out of input resolution at 217mph so the display can't show greater than that but the needle should still be able to move.
As calculated, a 7k rpm limit in 6th gear on stock tyres etc would make for a 250mph top speed limit, should you have the power, distance to ever do this -
Wow... silly to ask, are they really capable of that speed (with the right setup in place)?
2008 RS6 Avant (Monza Silver)
- Stage II MRC tune with gearbox (720PS/850Nm)
- MIJ Powerflow exhaust (non-res)
- H&R ARBs
-
Ads50
- 1st Gear
- Posts: 75
- Joined: Sat Apr 27, 2019 7:06 am
Post
by Ads50 » Sun May 26, 2019 10:32 am
c3nturi0n wrote:IanH755 wrote: ↑Sat May 25, 2019 1:56 pm
The Gearbox speed sensor runs out of input resolution at 217mph so the display can't show greater than that but the needle should still be able to move.
As calculated, a 7k rpm limit in 6th gear on stock tyres etc would make for a 250mph top speed limit, should you have the power, distance to ever do this -
Wow... silly to ask, are they really capable of that speed (with the right setup in place)?
Long enough road maybe it will, they get to 200 pretty easy
Sent from my iPhone using Tapatalk
-
welwynnick
- 4th Gear
- Posts: 573
- Joined: Fri May 25, 2018 4:53 pm
Post
by welwynnick » Sun May 26, 2019 12:16 pm
Maybe a very powerful engine might have the power, but you'd have to wonder if the wheels bearings and differentials would overheat first?
Nick
-
doodlebug
- Cruising
- Posts: 5833
- Joined: Thu Dec 18, 2008 11:56 am
- Location: Somewhere. Maybe.
Post
by doodlebug » Sun May 26, 2019 1:51 pm
I’d not fancy it on the tyres either. It’s a heavy old Bertha, stock tyres are going to degrade rapidly at that speed.
-
Ads50
- 1st Gear
- Posts: 75
- Joined: Sat Apr 27, 2019 7:06 am
Post
by Ads50 » Sun May 26, 2019 2:19 pm
People have done it !
Sent from my iPhone using Tapatalk
-
doodlebug
- Cruising
- Posts: 5833
- Joined: Thu Dec 18, 2008 11:56 am
- Location: Somewhere. Maybe.
Post
by doodlebug » Sun May 26, 2019 3:30 pm
More fool them! There’s a reason Veyron and Chiron have bespoke rubber.
-
Ads50
- 1st Gear
- Posts: 75
- Joined: Sat Apr 27, 2019 7:06 am
Post
by Ads50 » Sun May 26, 2019 4:32 pm
doodlebug wrote:More fool them! There’s a reason Veyron and Chiron have bespoke rubber.
True, not many people worry about things like that, worrying really.
Sent from my iPhone using Tapatalk
-
don0301
- 4th Gear
- Posts: 770
- Joined: Wed Aug 13, 2014 3:39 pm
Post
by don0301 » Sun May 26, 2019 6:12 pm
biggest threat to the tyre is heat.
speed rating is for a constant speed for 2 hours.
I'm sure there will be a safety margin in there too.
So a short run at 200-210mph I can't imagine to be too risky if you've checked tyres prior. Obviously if 1 did fail I'd imagine you'd be in a world of hurt....
Ferrari 296 GTB
992 Turbo S
Ferrari 488 Spider
C6 RS6
E46 M3 convertible
Nissan 200sx mk 2
Vauxhall Senator
Ford Sierra 1.8LX
Peugeot 205 1.9 GTi
Vauxhall Belmont SRi
Vauxhall Astra 1.3
Vauxhall Astra 1.3
1st car Datsun 120 FII Lime green....yeah

-
c3nturi0n
- 3rd Gear
- Posts: 467
- Joined: Tue May 29, 2018 10:50 am
Post
by c3nturi0n » Sun May 26, 2019 8:30 pm
Ads50 wrote: ↑Sun May 26, 2019 10:32 am
c3nturi0n wrote:IanH755 wrote: ↑Sat May 25, 2019 1:56 pm
The Gearbox speed sensor runs out of input resolution at 217mph so the display can't show greater than that but the needle should still be able to move.
As calculated, a 7k rpm limit in 6th gear on stock tyres etc would make for a 250mph top speed limit, should you have the power, distance to ever do this -
Wow... silly to ask, are they really capable of that speed (with the right setup in place)?
Long enough road maybe it will, they get to 200 pretty easy
Sent from my iPhone using Tapatalk
Yup... been there done that

.
2008 RS6 Avant (Monza Silver)
- Stage II MRC tune with gearbox (720PS/850Nm)
- MIJ Powerflow exhaust (non-res)
- H&R ARBs
-
don0301
- 4th Gear
- Posts: 770
- Joined: Wed Aug 13, 2014 3:39 pm
Post
by don0301 » Sun May 26, 2019 9:17 pm
c3nturi0n wrote: ↑Sun May 26, 2019 8:30 pm
Ads50 wrote: ↑Sun May 26, 2019 10:32 am
c3nturi0n wrote:
Wow... silly to ask, are they really capable of that speed (with the right setup in place)?
Long enough road maybe it will, they get to 200 pretty easy
Sent from my iPhone using Tapatalk
Yup... been there done that

.
There's a big difference between 200 on the speedo and true 200

Ferrari 296 GTB
992 Turbo S
Ferrari 488 Spider
C6 RS6
E46 M3 convertible
Nissan 200sx mk 2
Vauxhall Senator
Ford Sierra 1.8LX
Peugeot 205 1.9 GTi
Vauxhall Belmont SRi
Vauxhall Astra 1.3
Vauxhall Astra 1.3
1st car Datsun 120 FII Lime green....yeah

-
c3nturi0n
- 3rd Gear
- Posts: 467
- Joined: Tue May 29, 2018 10:50 am
Post
by c3nturi0n » Sun May 26, 2019 10:13 pm
...especially when you have to break hard

!
2008 RS6 Avant (Monza Silver)
- Stage II MRC tune with gearbox (720PS/850Nm)
- MIJ Powerflow exhaust (non-res)
- H&R ARBs
-
welwynnick
- 4th Gear
- Posts: 573
- Joined: Fri May 25, 2018 4:53 pm
Post
by welwynnick » Mon May 27, 2019 8:04 pm
When you do the sums, the centrifugal forces that the tyres have to withstand make you stop and think. I did the calcs once ( I used to go around weighing tyres for this reason) and I can't remember the numbers, but I do remember they were remarkably large. The tyres simply have to be very strong.
Nick
Who is online
Users browsing this forum: CupraDine and 8 guests