Question/Advice 21" tyres?

[sixspeed]

The ADV08's definitely suits the 4G, might also look great on the 4F

Stunning!

I would imagine you're looking at between 6-8k for those though!

[RS6chris!]

HOW MUCH?.....

[RS6chris!]

Golfather

Would the Q7 21"s fit with adapters?

530 x 512 ?

21"x10". 44et?

[Golfather]

Yes they'll fit in theory but it depends on the adaptor.
They'll have -2mm poke, but by the time you factor in a 15mm adaptor, the net poke becomes around +13mm.
Which may be too agressive for the front and you will get arch contact if lowered unless you use stretched rubber.

[classba]

Yes they'll fit in theory but it depends on the adaptor.
They'll have -2mm poke, but by the time you factor in a 15mm adaptor, the net poke becomes around +13mm.
Which may be too agressive for the front and you will get arch contact if lowered unless you use stretched rubber.

+1 plus it will look naff and with less concave than OEM 20's 5 segments.

Chris, don't skimp on alloys for the 6 and spoil the look of the car.

[RS6chris!]

Received and understood!!!

I've be toying since I got the car on wheels?

Just can't decide on whether OEM 20"s are the best to stick with or not?

Just wanna try something different?

It seems the C6 is a difficult car to re wheel!!!!!

[RS6chris!]

If they did Classbas 22"s in 21"s??

I buy a set tommorow!!

[classba]

If they did Classbas 22"s in 21"s??

I buy a set tommorow!!

Chris.... just 1 inch diff... whats the matter with you?...

[RS6chris!]

How's about these boys?

Would these fit?

I know some boys have ran 21" bi motos!



http://bit.ly/1emKXKK

[Golfather]

They will fit but the correct offset for RS6 MTM Bimotos is ET40
Therefore these will stick out by a further 5mm, so more chance of wheel arch contact.

[RS6chris!]

What about...

20" x 10.5
Offset 25

With a 10 mm spacer?

Any one?

Golf???

[classba]

With 10.5" wide, you need to have about ET40-42. ET25 will have the wheels sticking out by 15mm pass the arches to my calculations so adding spacers will add even more to it.

[RS6chris!]

Thanks Classba

Seen some BBS CH in that spec...great deep dish on them too.

The hunt continues.

[toofattodrive]

Normal C7 A6 rims are ET35 mate but the C7 RS6 wheels are ET25 and they certainly dont fit the C6 without a bit of rub.

Agreed though that if your'e gonna spend the money to upgrade the rims, get something different, and something that fits

Would they rub on the inside or outside side of the tyre?

[RS6chris!]

Another one for the wheel experts!!

20" x 10"

Offset 26 or 43??

Cheers