Open Bonnet.... Not working

5.0 V10 50v biturbo - 571 bhp
Post Reply
User avatar
993turbo
2nd Gear
Posts: 162
Joined: Thu Mar 20, 2014 11:40 pm
Location: Puerto Banus - Marbella

Open Bonnet.... Not working

Post by 993turbo » Mon Feb 29, 2016 3:59 pm

Oki, was going to pop my bonnet today. Not opening. :FIREdevil:

So, how do I open the bonnet when the release wire is broken.........?

:audibash:
RS6 MTM C6 Avant (Daily Driver)
360 Modena (manual)
F430 Spider (F1)
+ 4 classic Porsches
Top
User avatar
classba
Top Gear
Posts: 1814
Joined: Wed Oct 10, 2012 1:11 am

Re: Open Bonnet.... Not working

Post by classba » Mon Feb 29, 2016 4:36 pm

Oh dear.... take the bonnet lever apart and try pulling the wire itself and if failing that, you need to stick a camera from underside to see if the cable has dislodged from the catch. It's very unlikely that the cable is snapped.
Too much power is barely enough.
Top
User avatar
993turbo
2nd Gear
Posts: 162
Joined: Thu Mar 20, 2014 11:40 pm
Location: Puerto Banus - Marbella

Re: Open Bonnet.... Not working

Post by 993turbo » Mon Feb 29, 2016 4:43 pm

its disconnected from the latch.

:-/
RS6 MTM C6 Avant (Daily Driver)
360 Modena (manual)
F430 Spider (F1)
+ 4 classic Porsches
Top
Terminator
Neutral
Posts: 3
Joined: Sat Jun 14, 2014 10:50 am

Re: Open Bonnet.... Not working

Post by Terminator » Tue Mar 01, 2016 10:35 am

Are you a member of the breakdown recovery services? If you are and have 'At Home' cover they should come out and be able to effect a temporary fix (they have experience of this).

Failing that, they should be able to tow you to a garage.
Top
User avatar
993turbo
2nd Gear
Posts: 162
Joined: Thu Mar 20, 2014 11:40 pm
Location: Puerto Banus - Marbella

Re: Open Bonnet.... Not working

Post by 993turbo » Tue Mar 01, 2016 2:02 pm

Haha, yeah, thanks.

The car is in my workshop :-)

Dont need towing anywhere. The car is fully driveable. :-) Just good to get to open the bonnet. No urgency. Sooner or later I need to open the bonnet.. Better get on with it.
RS6 MTM C6 Avant (Daily Driver)
360 Modena (manual)
F430 Spider (F1)
+ 4 classic Porsches
Top
rs6666
2nd Gear
Posts: 102
Joined: Mon Oct 25, 2010 7:44 pm

Re: Open Bonnet.... Not working

Post by rs6666 » Tue Mar 01, 2016 11:58 pm

think these guys had the same problem!!!

http://www.ebay.co.uk/itm/2008-AUDI-RS6 ... Swe7BW0Wtt

nice cold air vent
Top
User avatar
Woly64
3rd Gear
Posts: 322
Joined: Tue Apr 26, 2011 10:29 am
Location: Here ..... all the time

Re: Open Bonnet.... Not working

Post by Woly64 » Wed Mar 02, 2016 1:41 pm

you would have thought the Police could undo the bonnet by trashing the grille not the bonnet itself!
Currently floating along in a 2020 Magnetic Grey Bentley Continental GT & bouncing around in a Navarro S3 black edition
2009 C6 Avant NR Milly, MRC Stage 2/gearbox, MTM 21'' bimotos, H&R arb's, KW coil overs, 756ps & 1085 Nm (now in Simon’s safe hands)
C5 RS6+ No 315 in Metallic Silver (gone but never to be forgotten)
S8 V10 awesome engine but taxi-like gearbox - had to get back to RS motoring
C5 RS6 in Avus Silver - the 1st RS experience
:-)
Top
User avatar
993turbo
2nd Gear
Posts: 162
Joined: Thu Mar 20, 2014 11:40 pm
Location: Puerto Banus - Marbella

Re: Open Bonnet.... Not working

Post by 993turbo » Fri Mar 04, 2016 12:22 pm

cannot see how thrashing the grille would help.......
RS6 MTM C6 Avant (Daily Driver)
360 Modena (manual)
F430 Spider (F1)
+ 4 classic Porsches
Top
User avatar
Woly64
3rd Gear
Posts: 322
Joined: Tue Apr 26, 2011 10:29 am
Location: Here ..... all the time

Re: Open Bonnet.... Not working

Post by Woly64 » Fri Mar 04, 2016 2:07 pm

thought you would be able to access the bonnet catch mechanism from underneath after going in through the grille
Currently floating along in a 2020 Magnetic Grey Bentley Continental GT & bouncing around in a Navarro S3 black edition
2009 C6 Avant NR Milly, MRC Stage 2/gearbox, MTM 21'' bimotos, H&R arb's, KW coil overs, 756ps & 1085 Nm (now in Simon’s safe hands)
C5 RS6+ No 315 in Metallic Silver (gone but never to be forgotten)
S8 V10 awesome engine but taxi-like gearbox - had to get back to RS motoring
C5 RS6 in Avus Silver - the 1st RS experience
:-)
Top
User avatar
993turbo
2nd Gear
Posts: 162
Joined: Thu Mar 20, 2014 11:40 pm
Location: Puerto Banus - Marbella

Re: Open Bonnet.... Not working

Post by 993turbo » Fri Mar 11, 2016 11:51 am

Doubt it.
there are radiators / coolers in the way. The locking mechanism is behind them.

So, I guess it will be chopping time when that time comes first. :-)
RS6 MTM C6 Avant (Daily Driver)
360 Modena (manual)
F430 Spider (F1)
+ 4 classic Porsches
Top
TomRS
4th Gear
Posts: 759
Joined: Tue Mar 24, 2015 1:36 pm
Location: Middlesbrough, United Kingdom
Contact:
Contact TomRS

Re: Open Bonnet.... Not working

Post by TomRS » Fri Mar 11, 2016 12:42 pm

993turbo wrote:Doubt it.
there are radiators / coolers in the way. The locking mechanism is behind them.

So, I guess it will be chopping time when that time comes first. :-)

Is there no other way in other than as you say cutting something you dont really want to cut?
Audi RS4 B5 + Audi Q7 4.2TDi
Gone but not forgotten :smile_smoking:
2017 Mercedes E63S W213 1033/1400nm
2013 Mercedes E63S W212 740/1200nm
2010 Nissan GT-R SVM 680R
2010 RS6 C6 Avant Stage 2 730/1088nm
Top
User avatar
993turbo
2nd Gear
Posts: 162
Joined: Thu Mar 20, 2014 11:40 pm
Location: Puerto Banus - Marbella

Re: Open Bonnet.... Not working

Post by 993turbo » Sun Mar 13, 2016 11:07 am

I will be chopping the bonnet.

Sourced a 2nd hand one from Germany in the same colour. Ace. 249euro....

But I will not chop before I need to. Wonder what comes first. Oil light? Washer fluid? or the annual service :-)

:bigwave:
RS6 MTM C6 Avant (Daily Driver)
360 Modena (manual)
F430 Spider (F1)
+ 4 classic Porsches
Top
TomRS
4th Gear
Posts: 759
Joined: Tue Mar 24, 2015 1:36 pm
Location: Middlesbrough, United Kingdom
Contact:
Contact TomRS

Re: Open Bonnet.... Not working

Post by TomRS » Tue Mar 15, 2016 9:08 am

993turbo wrote:I will be chopping the bonnet.

Sourced a 2nd hand one from Germany in the same colour. Ace. 249euro....

But I will not chop before I need to. Wonder what comes first. Oil light? Washer fluid? or the annual service :-)

:bigwave:
Thats awful.... i'd cry if i had to cut my bonnet to get it open, i'd be taking it to Audi and complaining!
Audi RS4 B5 + Audi Q7 4.2TDi
Gone but not forgotten :smile_smoking:
2017 Mercedes E63S W213 1033/1400nm
2013 Mercedes E63S W212 740/1200nm
2010 Nissan GT-R SVM 680R
2010 RS6 C6 Avant Stage 2 730/1088nm
Top
User avatar
993turbo
2nd Gear
Posts: 162
Joined: Thu Mar 20, 2014 11:40 pm
Location: Puerto Banus - Marbella

Re: Open Bonnet.... Not working

Post by 993turbo » Tue Mar 15, 2016 10:18 pm

Agreed. Most of my other cars have emergency use wires in various locations........
RS6 MTM C6 Avant (Daily Driver)
360 Modena (manual)
F430 Spider (F1)
+ 4 classic Porsches
Top
pcorpe
2nd Gear
Posts: 129
Joined: Tue Aug 24, 2010 10:07 am

Re: Open Bonnet.... Not working

Post by pcorpe » Wed Mar 16, 2016 7:18 pm

i know this is gonna sound odd, but have you though of one of those wifi endoscope things? I picked one up from fleabay a while back and they can be really useful for this type of thing?
not sure you could get enough purchase to open using it, but it might result in a cheaper less invasive option? just a thought?
Top
Post Reply

Return to “RS6 / RS6 Plus (C6 Typ 4F) 2008-2010”

Who is online

Users browsing this forum: CupraDine and 349 guests