Remote clock disappeared after battery disconnect.

Diagnostic Trouble Codes (DTC) / VCDS (VAG-COM) forum
Post Reply
User avatar
Shoppinit
Cruising
Posts: 20318
Joined: Wed Dec 31, 2008 6:24 pm

Remote clock disappeared after battery disconnect.

Post by Shoppinit » Sat Oct 10, 2009 6:23 pm

My RS6 has always set the time on its own until the other day when I disconnected the battery. I don't get the little antenna logo next to the clock any more.

I've gone through the instrument cluster and everything is coded correctly as far as I can tell. I tried turning it off and back on again in adaptation, but to no avail:
A19,12,xxxx?: Remote Clock (0 = inactive / 1 = active)

-------------------------------------------------------------------------------
Address 17: Instruments Labels: 4B0-920-xxx-17.lbl
Part No: 4B0 920 937 B
Component: KOMBI+WEGFAHRS. VDO D12
Coding: 01084
Shop #: WSC 08336
WUAZZZ4B43N901198 AUZ7Z0B2189001

No fault code found.
Any ideas? Thanks.
Daytona RS6 C5 Avant. Viper'd, Billies, Waggers, MTM box brain, C6 stoppers, xcarlink, R8 coolant cap (woohoo)
///M3 E46 | XC90 (V8, natch) | Passat GTE | RR Classic V8 flapper
"The major difference between a thing that might go wrong and a thing that cannot possibly go wrong is that when a thing that cannot possibly go wrong goes wrong it usually turns out to be impossible to get at and repair."

Post Reply

Return to “DTC / VCDS”

Who is online

Users browsing this forum: No registered users and 47 guests