RS246.com Forum :: The World's #1 Audi R, S and RS Enthusiast Community

Chassis Type: 4B - Audi A6 C5
Scan: 01 02 03 06 08 15 16 17 18 34 35 36 37 45 55 56 57 65 67 75
76 77

VIN: WUAZZZ4BX3N902582
-------------------------------------------------------------------------------
Address 01: Engine Labels: 077-907-558-BCY.lbl
Part No: 4D1 907 558
Component: 4.2l V8/5VT G 0003
Coding: 0010752
Shop #: WSC 66565 257 00032

1 Fault Found
17983 - Right Engine Mount Solenoid Valve (N145): Short to Plus
P1575 - 001 - Upper Limit Exceeded
Readiness: 0000 1000



Is this serious. Makes no diference to the driving experience.

and here again, eddie... the engine mounts have electrical pressure sensors built in to register engine torque - if the ecu picks up a fault, it should back off the power slightly to avoid damage - had a car in the other day. two options - the factory have a wiring mod for the A8's which im sure will work here (and you can put whatever mountings you like in) or replace the mounting with the factory part....

Much appreciated mate. I'll have a browse.

New OSF engine mount fitted. Fault code has gone. No more fault codes remain after driving. Problem solved at a cost of £250. £106.56 for the part + VAT then the labour.