first time using vagcom

Diagnostic Trouble Codes (DTC) / VCDS (VAG-COM) forum
Post Reply
rtd
Cruising
Posts: 2540
Joined: Fri Sep 29, 2006 2:02 pm

first time using vagcom

Post by rtd » Thu Mar 19, 2009 7:16 pm

ok guys i did a normal scan (if thats what you call it) and this is what came up. does this mean these are the only faults vagcom found or are there other scans i can do to look for faults elsewhere? not that i want to find any other faults :)


Thursday,19,March,2009,17:41:33:14480
VCDS Version: Release 805.3
Data version: 20090213



--------------------------------------------------------------------------------
--------------------------------------------------------------------------------


Chassis Type: 8D - Audi A4 B5
Scan: 01 02 03 08 15 16 17 25 35 37 45 55 56 57 67 75 76 77

VIN: WUAZZZ8DZ1N904257
-------------------------------------------------------------------------------
Address 01: Engine Labels: 078-907-551-AZA.lbl
Part No: 8D0 907 551 K
Component: 2.7l V6/5VT G 0001
Coding: 10711
Shop #: WSC 63351
WUAZZZ8DZ1N904257 AUZ7Z0Y1767343

No fault code found.
Readiness: 0000 0000

-------------------------------------------------------------------------------
Address 03: ABS Brakes Labels: 8D0-907-389.lbl
Part No: 8D0 907 389 E
Component: ABS/ESP allrad D56
Coding: 04395
Shop #: WSC 00720

No fault code found.

-------------------------------------------------------------------------------
Address 08: Auto HVAC Labels: Redir Fail!
Part No: 8D0 820 043 P
Component: A4 KLIMAAUTOMAT D58
Coding: 00061
Shop #: WSC 63351

1 Fault Found:
00779 - Outside Air Temp Sensor (G17)
30-00 - Open or Short to Plus

-------------------------------------------------------------------------------
Address 15: Airbags Labels: 8D0-959-655-AI8.lbl
Part No: 8D0 959 655 F
Component: Airbag Front+Kopf 2001
Coding: 01306
Shop #: WSC 02314

No fault code found.

-------------------------------------------------------------------------------
Address 17: Instruments Labels: 8D0-920-xxx-17.lbl
Part No: 8D0 920 981
Component: B5-KOMBIINSTR. VDO D13
Coding: 00464
Shop #: WSC 00720
WUAZZZ8DZ1N904257 AUZ7Z0Y1767343

No fault code found.

-------------------------------------------------------------------------------
Address 35: Centr. Locks Labels: 8D0-862-257.lbl
Part No: 8D0 862 257 E
Component: CV-Pump, Alarm, RC D17
Coding: 15210
Shop #: WSC 63351

1 Fault Found:
01368 - Alarm triggered by Luggage Compartment Switch
35-00 - -

-------------------------------------------------------------------------------
Address 45: Inter. Monitor Labels: 4B0-951-173.lbl
Part No: 4B0 951 173
Component: Innenraumueberw. D03
Coding: 00102
Shop #: WSC 63351

No fault code found.

-------------------------------------------------------------------------------
Address 55: Xenon Range Labels: 4B0-907-357-AUT.lbl
Part No: 4B0 907 357
Component: LEUCHTWEITEREGLER D004
Coding: 00012
Shop #: WSC 63351

No fault code found.

End ---------------------------------------------------------------------
Volvo XC90
C7 - RS6
C6 - RS6
B5 - RS4

tartan_rob
Cruising
Posts: 2990
Joined: Thu Sep 04, 2003 1:45 pm
Location: Swindon, Wilts

RE: first time using vagcom

Post by tartan_rob » Thu Mar 19, 2009 8:03 pm

It sure does...
2017 Kawasaki Z1000
2014 RS6
2014 S1

User avatar
PetrolDave
Cruising
Posts: 7599
Joined: Mon Nov 07, 2005 11:28 am
Location: Southampton, Hampshire UK

RE: first time using vagcom

Post by PetrolDave » Thu Mar 19, 2009 8:17 pm

So you may have a faulty G17 sensor and at some time you triggered the alarm...

Try clearing those fault codes and see if they come back, that will tell you if the G17 really is faulty (or maybe the wiring to it...).
Gone: 2006 B7 RS4 Avant (Phantom Black)

rtd
Cruising
Posts: 2540
Joined: Fri Sep 29, 2006 2:02 pm

RE: first time using vagcom

Post by rtd » Thu Mar 19, 2009 8:20 pm

petroldave - the g17 im aware of been showing for a while just not got round to getting it sorted.
Volvo XC90
C7 - RS6
C6 - RS6
B5 - RS4

jimbo1234567
5th Gear
Posts: 1411
Joined: Sun Jun 24, 2007 12:02 pm
Location: in the kitchen

RE: first time using vagcom

Post by jimbo1234567 » Thu Mar 19, 2009 11:35 pm

looks good to me :thumbs:

rtd
Cruising
Posts: 2540
Joined: Fri Sep 29, 2006 2:02 pm

RE: first time using vagcom

Post by rtd » Fri Mar 20, 2009 7:06 am

thanks jimbo - yep i'm fairly happy with that. when i bought the car it was only showing one fault code so its keeping up the good work. the less fault codes the better! :)
Volvo XC90
C7 - RS6
C6 - RS6
B5 - RS4

Post Reply

Return to “DTC / VCDS”

Who is online

Users browsing this forum: No registered users and 26 guests