Page 1 of 1
MAF Reading at Idle
Posted: Mon Apr 30, 2007 9:17 pm
by Philws4
As above really, not had a chance too do any logs yet but got a MAF of 3.8g/s on tickover.
Is this about right for a custom remapped engine?
RE: MAF Reading at Idle
Posted: Tue May 01, 2007 3:51 am
by Uwe@Ross-Tech
MAF readings at idle are not very useful. The peak value at full power is far more telling.
-Uwe-
Posted: Tue May 01, 2007 8:54 pm
by Philws4
Yeah i thought as much, i will try and get some time this weekend to do some logs.
Thanks for your reply.
Posted: Thu May 03, 2007 11:34 pm
by flashyg
looks fooked 2 me
what does block 32 read also
+6 ish on all 4 measuring blocks?
Posted: Mon May 07, 2007 7:57 pm
by Philws4
Did my first set of logs the other day and i'm pretty sure the MAF is ok.
http://www.rs246.com/index.php?name=PNp ... ic&t=61125
Posted: Wed Jul 11, 2007 3:30 pm
by AdamS4
I've just taken a drive and the max reading my MAF was 106.75, is that low ??
Posted: Wed Jul 11, 2007 3:35 pm
by GrahamS4
Yes. You did use all the revs didn't you?
Posted: Wed Jul 11, 2007 3:56 pm
by AdamS4
Yes, that was at full RPM, 100% throttle
Will this cause lack of power ?
Posted: Wed Jul 11, 2007 4:05 pm
by GrahamS4
I would have thought so.
Posted: Wed Jul 11, 2007 10:14 pm
by Philws4
Get your new MAF fitted Adam and try again, i bet you will be surprised by the difference.