RS246.com Forum :: The World's #1 Audi R, S and RS Enthusiast Community

17930 - Camshaft Adjustment; Bank 2: Malfunction P1522 — 35—10 — — — Intermittent

Readiness: 0000 0000

Only happened once I promise..
Any thoughts?
Thanks

Might help if you told people exactly what kind of car and motor this is from.

-Uwe-

Uwe@Ross-Tech wrote:Might help if you told people exactly what kind of car and motor this is from.

-Uwe-

He has a B5 RS4.

sorry guys, just thought I was so commonly on here you would know.
My mistake 2.7 bi.

Might help if you told people exactly what kind of car and motor this is from

to be fair it could be from any one of the fleet of Audi courtesy cars lol

2 true. Loll
But back to topic any help?
G

OK, I'm admittedly a noob here and don't know the personalities or what cars they have.

Repair manual says: "Check function of camshaft adjustment". Which means: with engine idling, go to Basic Settings, group 094. Then increase engine speed to over 2000 rpm. This will run a self-test on the valve timing adjustment. First it will show TEST ON, then either SYS OK or NOT OK in the 3rd and 4th fields. In the latter case, they want you to "Check solenoid valve for camshaft adjustment". Resistance should be 10 ... 18 Ω.

-Uwe-

Will do , great lesson. will let you know.
G

System OK. Did it twice.
So no issue may be temp blip?
What do you think.
Great test thanks so much.
G

Then I wouldn't worry about it unless/until it comes back.

-Uwe-

Thanks bud.