Just got VAGCOM how do i measure data?

Diagnostic Trouble Codes (DTC) / VCDS (VAG-COM) forum
Post Reply
User avatar
BigDaz
Neutral
Posts: 40
Joined: Tue Feb 21, 2006 12:57 pm

Just got VAGCOM how do i measure data?

Post by BigDaz » Thu Sep 07, 2006 8:58 pm

Just got my VAGCOM today , managed to run a fault scan and nothing serious appeared, How do I do log which tells me whats happening when I am driving, eg expected boost v actual boost , maf reading etc?
Cheers

Daz

(step by step if poss :) )

User avatar
CliveH
Cruising
Posts: 4754
Joined: Sat Oct 02, 2004 12:07 pm
Location: Yorkshire, UK

RE: Just got VAGCOM how do i measure data?

Post by CliveH » Fri Sep 08, 2006 9:23 am

Daz,

There's an excellent online manual here : http://www.ross-tech.com/vag-com/tour/m-blocks.html

Initially, I would use group 003 for ignition timing and mass airflow, and group 115 for boost.
Clive

S2 ABY coupe, S4 B5 saloon, S4 B6 avant
RS4 B7 phantom black saloon, mint, fully loaded, low mileage - FOR SALE!- http://www.rs246.com/index.php?name=PNp ... ic&t=88981
S8 D2 facelift, RS6 C5 saloon, both gone but not forgotten

User avatar
ZeroK66
Top Gear
Posts: 2249
Joined: Sat Jan 15, 2005 5:13 pm
Location: Devon, UK

RE: Just got VAGCOM how do i measure data?

Post by ZeroK66 » Fri Sep 08, 2006 10:25 am

Hi Daz,

Took me a while to figure it out... but got there in the end. Hope the online manual helps you out. Give me a buzz if you are stuck. PM me for number.

Cheers,.
Facelift Imola S4 | Cust K04's, Tubular Manifolds, 3" DPs->2.75" Catback | FMIC | PSS9 Coilovers + ARB's | Brembo 8-Pots | SS + DTS | 5??HP/475lbs/ft | 3.06S FATS on S4 Box

Sold: A4 (B5) 2.8 Quattro | Ivory Pearl
Melted: Corrado - IHI 1.8t: 343BHP

Post Reply

Return to “DTC / VCDS”

Who is online

Users browsing this forum: No registered users and 11 guests