RS246.com Forum :: The World's #1 Audi R, S and RS Enthusiast Community

Evening

I've just got VAG-COM and run an autoscan on the car for the 1st time and got these 2 errors back

Address 25: Immobilizer

Controller: Bit teA dre ss

Component: e 17 eingeben

No Faults Found

or DTCs not supported by controller

or a communication error occurred



-------------------------------------------------------------------------------

Address 35: Centr. Locks

Controller: 8D0 862 257 E

Component: CV-Pump, Alarm, RC D13

Coding: 13130

Shop #: WSC 06325

3 Faults Found:

01371 - Alarm triggered by Door Contact Switch; Driver's Side

35-00 - -

01370 - Alarm triggered by Interior Monitoring

35-00 - -

00956 - Key 2

09-00 - Adaptation Limit Surpassed

Can any body shed any light on them or are they ok to clear

Cheers

Mike.C.

All fine, does key no 2 work? If not try replacing battery, clear codes and try opening car with key 2 again.

Both keys work fine, I cleared the codes alst night and will check again later to see if they reappear

I had exactly the same code for key 2, but it didn't work on the car. I had to go to local Audi service to get it adapted again to immobilizer.