Engine mount fault

[ecain63]

Chassis Type: 4B - Audi A6 C5
Scan: 01 02 03 06 08 15 16 17 18 34 35 36 37 45 55 56 57 65 67 75
76 77

VIN: WUAZZZ4BX3N902582
-------------------------------------------------------------------------------
Address 01: Engine Labels: 077-907-558-BCY.lbl
Part No: 4D1 907 558
Component: 4.2l V8/5VT G 0003
Coding: 0010752
Shop #: WSC 66565 257 00032

1 Fault Found
17983 - Right Engine Mount Solenoid Valve (N145): Short to Plus
P1575 - 001 - Upper Limit Exceeded
Readiness: 0000 1000



Is this serious. Makes no diference to the driving experience.

[vinny]

and here again, eddie... the engine mounts have electrical pressure sensors built in to register engine torque - if the ecu picks up a fault, it should back off the power slightly to avoid damage - had a car in the other day. two options - the factory have a wiring mod for the A8's which im sure will work here (and you can put whatever mountings you like in) or replace the mounting with the factory part....

[ecain63]

Much appreciated mate. I'll have a browse.

[ecain63]

New OSF engine mount fitted. Fault code has gone. No more fault codes remain after driving. Problem solved at a cost of £250. £106.56 for the part + VAT then the labour.