Bumper adjusters

4.2 V8 32v Naturally Aspirated - 414 bhp
Post Reply
User avatar
zed_hn
2nd Gear
Posts: 134
Joined: Fri Mar 16, 2012 1:04 pm

Bumper adjusters

Post by zed_hn » Tue Sep 18, 2012 11:06 pm

Took bumper off today and found one of the two bumper adjuster broken!

Does any one know if you can replace or buy just the adjusters or does it mean I have to buy the whole bumper bar?

Cheers guys

User avatar
Eashan
1st Gear
Posts: 80
Joined: Fri Aug 26, 2011 2:09 am
Location: Walsall

Re: Bumper adjusters

Post by Eashan » Wed Sep 19, 2012 12:25 am

+1
B7 RS4
Black Optics
20" A5 wheels
Milltek-non res-no valves

User avatar
sonny
Cruising
Posts: 10278
Joined: Wed Nov 14, 2007 1:30 am
Location: Kent

Re: Bumper adjusters

Post by sonny » Wed Sep 19, 2012 2:10 am

One of mine had broken and was replaced by garage, so they can be purchased.
Money can't buy you love, but it can buy you a well sorted racecar

User avatar
zed_hn
2nd Gear
Posts: 134
Joined: Fri Mar 16, 2012 1:04 pm

Bumper adjusters

Post by zed_hn » Wed Sep 19, 2012 11:23 am

Cheers sonny

Iv just ordered 2 of them from Audi they are riveted on to the crash bar and are called bumper supports, came to £7.66 for the pair.

Thanks all hoot this helps

Zed

rwilsonrs4
4th Gear
Posts: 533
Joined: Tue May 03, 2011 10:55 am
Location: Scotland somewhere

Re: Bumper adjusters

Post by rwilsonrs4 » Wed Sep 19, 2012 7:00 pm

One of mine was also broken , got a pair from Audi off the shelf for about 6 quid odd but the base was ok so i just screwed in the top part instead of drilling out the rivets , worked fine , look for the how to's on here as its been covered many times , can be a bit tricky , i fiddled with mine a good while to get it right , also remember the adjusters on the top of the grill may well need lifted up to to get the gap right
Phantom black saloon ,PES M112 Supercharged 520ps/595nm K&N filter, 100 cell milltek cats,res valved milltek system. 8 and 10mm H&R spacers.H&R roll bars, "smoke chrome " alloy refurb. JHM Quickshifter, Bilstein B16 coilovers , uprated diff mount ,50/50 devils own WM kit so 1.4 litres/min in intake approx 10% more power and torque
1/4 mile 12.01 secs 123.5mph

Post Reply

Return to “RS4 (B7 Typ 8E) 2006–2008”

Who is online

Users browsing this forum: No registered users and 107 guests