Page 1 of 1
Retrofit Bluetooth
Posted: Fri Aug 24, 2012 9:24 am
by Rory
Any idea how you can retrofit bluetooth to run through the Nav system using the telephone function? I asked Audi and they quoted me some ridiculous price for it! I don't really want to go down the route of parrot or anything like that just want the whole car looking factory on the surface (but actually be OEM ++
) if I can. Is there anyone who does this and can code it in with
Vagcom?
Re: Retrofit Bluetooth
Posted: Fri Aug 24, 2012 9:32 am
by Brooner
Try Craig here's his site he fitted my bluetooth very happy and have had no problems
http://www.tclsatnav.com/
Re: Retrofit Bluetooth
Posted: Fri Aug 24, 2012 10:29 am
by remslie20
Where is Craig based?
Re: Retrofit Bluetooth
Posted: Fri Aug 24, 2012 10:34 am
by Rory
remslie20 wrote:Where is Craig based?
This was going to be my question too?
Re: Retrofit Bluetooth
Posted: Fri Aug 24, 2012 4:01 pm
by Brooner
Manchester Aera
Re: Retrofit Bluetooth
Posted: Fri Aug 24, 2012 4:21 pm
by Timster
Rory wrote:Any idea how you can retrofit bluetooth to run through the Nav system using the telephone function? I asked Audi and they quoted me some ridiculous price for it! I don't really want to go down the route of parrot or anything like that just want the whole car looking factory on the surface (but actually be OEM ++
) if I can. Is there anyone who does this and can code it in with Vagcom?
Do a google. I think there's plenty of fitters that will offer this. I had the Kufatec/Fiscon system fitted a couple of years ago. Fully integrates with the RNSE (but without the horrible OEM cradle)
Re: Retrofit Bluetooth
Posted: Fri Aug 24, 2012 6:03 pm
by TimDogg
Craig is awesome and did my RNS-E retro-fit and is used by Audi so is legit. Give him a call for advice.
Retrofit Bluetooth
Posted: Fri Aug 24, 2012 8:46 pm
by Rory
That's sound if he's in Manchester - only down the m62 at the better end of the Mersey.
Re: Retrofit Bluetooth
Posted: Sat Aug 25, 2012 11:55 am
by PetrolDave
You can also get a complete kit (module, antenna, microphone and harness) from Kufatec.
Fitting takes around an hour - but you also need access to
VCDS to recode (and clear fault codes from) the RNS-E, the instruments, the steering wheel (if you have an MFSW) and the BT module itself.
Re: Retrofit Bluetooth
Posted: Sat Aug 25, 2012 6:17 pm
by mark758
Re: Retrofit Bluetooth
Posted: Sat Aug 25, 2012 11:08 pm
by wolfgang
^ Got all my multimedia stuff fitted by HazzyDayz within weeks of picking up my car towards the end of 2010. Cannot fault those guys. They removed the old Parrot kit that was in there and fitted the OEM Bluetooth kit, Alpine/Kufatec and also set up the RS4 multimedia logo on startup. Place was a little tricky to find but service was excellent.
Everything still works faultlessly to this day.