Page 1 of 1
cost of new brake pads
Posted: Tue Mar 27, 2012 9:28 pm
by drbru
OK so after 2 years of ownership my first warning light has come on
Looks like I need new brake pads...
Can anyone give me an idea of how much Audi would charge for this...Lets assume worst case scenario for all for including labour?
THanks
Brunel
Re: cost of new brake pads
Posted: Tue Mar 27, 2012 9:48 pm
by Terry1948
OEM pads about £330, if you need discs you can add another £386 for rears & £470 for fronts plus labour.
Re: cost of new brake pads
Posted: Tue Mar 27, 2012 9:57 pm
by drbru
thanks...
Ive been doing some digging around and it seems that there are quite a few people here who would recommend EBC yellowstuffs which Im leaning towards...
I think ill actually source them myself and then get them fitting outside of Audi
Am I right in thinking that they have wear sensors?
In addition, I also read that they may need modding to fit...Whats this all about?
Cheers
Brunel
Re: cost of new brake pads
Posted: Tue Mar 27, 2012 10:31 pm
by P_G
EBC's would be about £230 for fronts and rears all in. They do have wear sensors and no modifications required so long you get the right ones, just plug and play.
Re: cost of new brake pads
Posted: Thu Mar 29, 2012 7:10 pm
by DazN
EBC only have wear sensors on the fronts but the recommendation is to change the rears when the fronts tell you they need changing, which is overkill.
I've had the YS on mine for a few weeks and there seems to be a lot more dust than I had with the Mintex ones that were on before, braking seems better but I don't know if that's due to new pads combined with new discs.
Re: cost of new brake pads
Posted: Thu Mar 29, 2012 7:17 pm
by Ice_Coffee
do oe pads have sensors on the rears too ? if so wont fitting the EBC yellows throw up a fault ?
Re: cost of new brake pads
Posted: Thu Mar 29, 2012 7:19 pm
by Terry1948
There are no sensors on the rear
Re: cost of new brake pads
Posted: Thu Mar 29, 2012 7:20 pm
by DazN
No I don't think they do, the EBC rears come with sensor cables but there's nowhere to connect them!!