Bolster question
Bolster question
I went to Salisbury Audi today to look at a B7 Avant. No sales guys were around so I wandered into the compound and had a sniff around. The car wasn't even locked!
I sat in the seat and my backside wouldn't fit in the seat - Are the bolsters adjustable or were they just inflated? Do they even stay inflated with the engine off?
If that's how they are meant to be then that rules out a B7 for me! Is there any other option for a large hipped bloke like me?
I'm 6'1" with a 36 inch waist & weigh 15 stone so whilst I'm not skinny I'm not exactly obese either.
Anyone know anything about this car? No photos on the page I'm afraid.
http://www.audi.co.uk/used-cars/used-ca ... =se_na_re_
I sat in the seat and my backside wouldn't fit in the seat - Are the bolsters adjustable or were they just inflated? Do they even stay inflated with the engine off?
If that's how they are meant to be then that rules out a B7 for me! Is there any other option for a large hipped bloke like me?
I'm 6'1" with a 36 inch waist & weigh 15 stone so whilst I'm not skinny I'm not exactly obese either.
Anyone know anything about this car? No photos on the page I'm afraid.
http://www.audi.co.uk/used-cars/used-ca ... =se_na_re_
B7 RS4 Avant. MRC'd - manifold, Milltek & remap
Sold - B5 RS4 Avant. MRC remap 460bhp, B7 brakes, Full Milltek. Missano Red
Sold - B5 RS4 Avant. MRC remap 460bhp, B7 brakes, Full Milltek. Missano Red
Re: Bolster question
If bucket seats are no use, you might need to source a car with the optional Recaro's.


3.141
_________________________________
'14 C63 AMG Edition 507
'07 B7 RS4 +Milltek Non-Res, Non-Valved (Sold)
'10 YZF R1 + Akrapovics
_________________________________
'14 C63 AMG Edition 507
'07 B7 RS4 +Milltek Non-Res, Non-Valved (Sold)
'10 YZF R1 + Akrapovics
-
- 4th Gear
- Posts: 533
- Joined: Tue May 03, 2011 10:55 am
- Location: Scotland somewhere
Re: Bolster question
i,m about the same size as you and fit perfectly into mine with the bolsters relaxed so maybe they were pumped right up
Phantom black saloon ,PES M112 Supercharged 520ps/595nm K&N filter, 100 cell milltek cats,res valved milltek system. 8 and 10mm H&R spacers.H&R roll bars, "smoke chrome " alloy refurb. JHM Quickshifter, Bilstein B16 coilovers , uprated diff mount ,50/50 devils own WM kit so 1.4 litres/min in intake approx 10% more power and torque
1/4 mile 12.01 secs 123.5mph
1/4 mile 12.01 secs 123.5mph
Re: Bolster question
The bolsters are activated when the Sports button is pressed. When the engine is off, the "S" button will be off and only activated when pressed.
Money can't buy you love, but it can buy you a well sorted racecar
Re: Bolster question
Thanks for the replies.
I'll take it for a test drive & see how comfortable it is.
From a search on this subject, it would seem that I could disable the bolsters from the DIS. Is this correct? Do the bolsters on the passenger side inflate/deflate too?
I like the look of the Recaros - how much would it be to retro-fit them? Since I suspect that they are full of airbags & electrics it won't be cheap...

I'll take it for a test drive & see how comfortable it is.
From a search on this subject, it would seem that I could disable the bolsters from the DIS. Is this correct? Do the bolsters on the passenger side inflate/deflate too?
I like the look of the Recaros - how much would it be to retro-fit them? Since I suspect that they are full of airbags & electrics it won't be cheap...

B7 RS4 Avant. MRC'd - manifold, Milltek & remap
Sold - B5 RS4 Avant. MRC remap 460bhp, B7 brakes, Full Milltek. Missano Red
Sold - B5 RS4 Avant. MRC remap 460bhp, B7 brakes, Full Milltek. Missano Red
Re: Bolster question
yes - you can disable seat inflation when S is pressed (mine is - you get bored of it very quickly).
Passenger seat is air inflated but not linked to the s button.
Cheapest option would be to find somebody who wants to swap.
Passenger seat is air inflated but not linked to the s button.
Cheapest option would be to find somebody who wants to swap.
-
- 4th Gear
- Posts: 743
- Joined: Thu Mar 24, 2011 2:06 pm
- Location: Somewhere in Kent
Re: Bolster question
There are also two little switches on the side of the seats that adjust the bolsters, put them in a position your comfortable with when normal driving, then when you hit the sport button they tighten up, if you dont like this feature you can turn it of using the DIS.
Im 5ft 8, 36 inch waist and weight 14 1/2 stone - so quite similar - the seats are fine for me, took a few drives to get used to them from my old S4 (which has the comfort recoro seat option, but now prefer the RS4 buckets, just takes a bit of a differnt way to get in and out of the car to avoid wearing teh bolster to much.
Im 5ft 8, 36 inch waist and weight 14 1/2 stone - so quite similar - the seats are fine for me, took a few drives to get used to them from my old S4 (which has the comfort recoro seat option, but now prefer the RS4 buckets, just takes a bit of a differnt way to get in and out of the car to avoid wearing teh bolster to much.
Current: MK7 Golf R, Lapiz Blue 5 dr
Gone and missed: 2006 Sprint Blue B7 RS4 Avant. Non res valved Milly.
Gone: B6 S4. Noggy BLue. AMD Stage 3 (Milteck Res, Sports Cats, AMD Chip, Piper Cross Air Filter) ECS Drilled/Slotted Rotors, EBC Red Stuff Pads.
Gone and missed: 2006 Sprint Blue B7 RS4 Avant. Non res valved Milly.
Gone: B6 S4. Noggy BLue. AMD Stage 3 (Milteck Res, Sports Cats, AMD Chip, Piper Cross Air Filter) ECS Drilled/Slotted Rotors, EBC Red Stuff Pads.
Re: Bolster question
Apologies for the link not working.
Salisbury Audi have withdrawn it from the website. Maybe it hasn't been cleaned up yet or it has already been bagged by someone else.
I'll keep you posted.
Salisbury Audi have withdrawn it from the website. Maybe it hasn't been cleaned up yet or it has already been bagged by someone else.
I'll keep you posted.

B7 RS4 Avant. MRC'd - manifold, Milltek & remap
Sold - B5 RS4 Avant. MRC remap 460bhp, B7 brakes, Full Milltek. Missano Red
Sold - B5 RS4 Avant. MRC remap 460bhp, B7 brakes, Full Milltek. Missano Red
Re: Bolster question
-it's sold already. I went to look yesterday lunchtime and it had gone...Brisel wrote:Apologies for the link not working.
Salisbury Audi have withdrawn it from the website. Maybe it hasn't been cleaned up yet or it has already been bagged by someone else.
I'll keep you posted.

RS2 for 8 years / 100k miles
Current; '07 RS4 Avant, Daytona, Buckets...
"it's gotta be shooting brake"
Current; '07 RS4 Avant, Daytona, Buckets...
"it's gotta be shooting brake"
Re: Bolster question
Ah.
It did need a set of front discs, so I don't think it had been driven gently. Alloys were corroded too.
It did need a set of front discs, so I don't think it had been driven gently. Alloys were corroded too.
B7 RS4 Avant. MRC'd - manifold, Milltek & remap
Sold - B5 RS4 Avant. MRC remap 460bhp, B7 brakes, Full Milltek. Missano Red
Sold - B5 RS4 Avant. MRC remap 460bhp, B7 brakes, Full Milltek. Missano Red
Re: Bolster question
There are plenty out there to choose from.
Who is online
Users browsing this forum: No registered users and 79 guests