Possible Group buy, whos interested in...(Brakes)

4.2 V8 32v Naturally Aspirated - 414 bhp
juice
3rd Gear
Posts: 310
Joined: Fri Aug 15, 2008 12:03 am

Possible Group buy, whos interested in...(Brakes)

Post by juice » Sat Feb 19, 2011 11:27 am

the JHM grooved discs?

Alot of you B7 owners run the cross drilled/phaeton discs however if yours are needing to be replaced soon then have a think about these.

This is also for interest to B5 rs4's owners who run the front b7 Brake set up

your choice
either 365mm or 380mm Grooved discs... size is upto you depending on your wheels/preferences

its been discussed quite a bite that drilled discs crack and warp and at 550gbp a pop there not cheap. Phaeton discs are a very good replacement and at 320gbp they are priced reasonably.

JHM's 365mm grooved discs are $490 which works out to be 303gbp + duty
JHM's 380mm grooved discs are $650 which works out to be 401gbp + duty
(prices with the current rate)

ps: you will need to have hats from the b7 discs to mount on to these as they are sold as rotors only.

I have been in contact with Satans Child (Jack) and a few other people on the SRS forum who might be interested (you know who you guys are) and he can do a really good deal on shipping and could possibly do a good price if alot more people are interested

im sure jack will be along to add any further info.

sound interested then get your names down

1. Juice - 380mm rotor kit
2. CliveH - 365mm Discs
Avus B5 RS4, Miltek down pipes/No cats/Miltek Cat-back, Wagner uprated SMIC's, short shifter, B7 brakes, Phaeton brake ducts, H&R ARB's, H&R Coilovers, AWE DTS, MRC custom Remap + water meth injection = BIG GRIN on my face with poo in my passengers pants

**Now with a Carbon roof**

'Build the best and the rest will follow'

User avatar
sonny
Cruising
Posts: 10278
Joined: Wed Nov 14, 2007 1:30 am
Location: Kent

RE: Possible Group buy, whos interested in...(Brakes)

Post by sonny » Sat Feb 19, 2011 12:30 pm

Hiya Juice hows it going?

What is the minimum needed for a group buy?

Might be interested in this.
Money can't buy you love, but it can buy you a well sorted racecar

P_G
Cruising
Posts: 8249
Joined: Sun Jul 09, 2006 1:25 pm
Location: Newcastle upon Tyne

Post by P_G » Sat Feb 19, 2011 12:39 pm

When are you thinking of doing this GB? Timing is very dependent on whether I would be in for this.

User avatar
thedoluk
2nd Gear
Posts: 218
Joined: Wed Oct 14, 2009 2:31 pm
Location: Croxley Green

Post by thedoluk » Sat Feb 19, 2011 1:04 pm

Bugger! Just fitted the 380mm and rears, wish this had happened a couple weeks ago..
Daytona Avant - Optics - Titanium pack - MRC 464.6ps 513Nm - H&R ARBs + Springs - Apikol Diff mount - 034 Tranny mount - JHM Shifter

juice
3rd Gear
Posts: 310
Joined: Fri Aug 15, 2008 12:03 am

Re: RE: Possible Group buy, whos interested in...(Brakes)

Post by juice » Sat Feb 19, 2011 1:15 pm

sonny wrote:Hiya Juice hows it going?

What is the minimum needed for a group buy?

Might be interested in this.
hey dude , all is well, just getting the car ready for the ring.

there is no minimum required but the more the merrier. Jack can get them over very quickly (ie: within 48hours) but if alot of people are interested and serious on buying soonish, we can share the shipping cost.
Waiting on jack to confirm prices etc.
Avus B5 RS4, Miltek down pipes/No cats/Miltek Cat-back, Wagner uprated SMIC's, short shifter, B7 brakes, Phaeton brake ducts, H&R ARB's, H&R Coilovers, AWE DTS, MRC custom Remap + water meth injection = BIG GRIN on my face with poo in my passengers pants

**Now with a Carbon roof**

'Build the best and the rest will follow'

juice
3rd Gear
Posts: 310
Joined: Fri Aug 15, 2008 12:03 am

Post by juice » Sat Feb 19, 2011 1:17 pm

P_G wrote:When are you thinking of doing this GB? Timing is very dependent on whether I would be in for this.
Hi PG
i know GB go on for a while, but looking to wrap this up and cofirm numbers by 25th Feb the altest. otherwise these things get dragged on and dont go ahead.
as said i understand its short notice but the more interested , the better the price.

besides 380mm rotors will look the dogs under your wheels.
Avus B5 RS4, Miltek down pipes/No cats/Miltek Cat-back, Wagner uprated SMIC's, short shifter, B7 brakes, Phaeton brake ducts, H&R ARB's, H&R Coilovers, AWE DTS, MRC custom Remap + water meth injection = BIG GRIN on my face with poo in my passengers pants

**Now with a Carbon roof**

'Build the best and the rest will follow'

P_G
Cruising
Posts: 8249
Joined: Sun Jul 09, 2006 1:25 pm
Location: Newcastle upon Tyne

Post by P_G » Sat Feb 19, 2011 1:50 pm

It's not that I'm bothered about. In reality if I change the fronts I'll change the rears at the same time and then it gets pricey. With road tax and Geneva Motorshow to finance this month another £1k on top I don't have.

I'll pass this time.

User avatar
aidanjaye
5th Gear
Posts: 1133
Joined: Mon Jan 12, 2009 11:43 pm
Location: Scotland

Post by aidanjaye » Sat Feb 19, 2011 4:46 pm

Interested, on the bigger ones. Any ideas on total costs. How will we go about paying and internal postage in UK.

User avatar
aidanjaye
5th Gear
Posts: 1133
Joined: Mon Jan 12, 2009 11:43 pm
Location: Scotland

Post by aidanjaye » Sat Feb 19, 2011 5:13 pm

[quote="thedoluk"]Bugger! Just fitted the 380mm and rears, wish this had happened a couple weeks ago..[/quote

Notice any difference with the 380s up front.

juice
3rd Gear
Posts: 310
Joined: Fri Aug 15, 2008 12:03 am

brakes

Post by juice » Sat Feb 19, 2011 6:33 pm

aidanjaye wrote:Interested, on the bigger ones. Any ideas on total costs. How will we go about paying and internal postage in UK.
hi mate, at the moment its just me and you interested in the bigger ones (380mm kit)
as far as total costs it will be 401 plus the duty/tax at i think 24% however if its just 2 sets that are ordered they can be delivered at $95 which we could split. but saying that ive noticed your in scotland and im in london.
Jack (satans child) on the SRS forum is on teh case for total pricing etc. so will keep you posted.
Avus B5 RS4, Miltek down pipes/No cats/Miltek Cat-back, Wagner uprated SMIC's, short shifter, B7 brakes, Phaeton brake ducts, H&R ARB's, H&R Coilovers, AWE DTS, MRC custom Remap + water meth injection = BIG GRIN on my face with poo in my passengers pants

**Now with a Carbon roof**

'Build the best and the rest will follow'

User avatar
aidanjaye
5th Gear
Posts: 1133
Joined: Mon Jan 12, 2009 11:43 pm
Location: Scotland

Post by aidanjaye » Sat Feb 19, 2011 6:42 pm

Surprised others aren't going with the 380s....only 100 quid more n will still fit under standard 19 wheels.

S4Player
Top Gear
Posts: 2186
Joined: Thu Oct 21, 2010 11:49 am
Location: Scotland

Post by S4Player » Sat Feb 19, 2011 7:10 pm

The 380's are good brakes I've got them on my car I would suggest ss lines and upgraded fluid! How can he get them so quick? I waited like four weeks for mine!!!! Backlog maybe?
1*** hp TTE C6 rs6 saloon and the ultimate WB B5

User avatar
sonny
Cruising
Posts: 10278
Joined: Wed Nov 14, 2007 1:30 am
Location: Kent

Post by sonny » Sat Feb 19, 2011 7:17 pm

Will the 380s fit under 18s?
Money can't buy you love, but it can buy you a well sorted racecar

Rick_RS4
Cruising
Posts: 2882
Joined: Mon Dec 13, 2010 4:37 pm

Post by Rick_RS4 » Sat Feb 19, 2011 7:48 pm

interested, but whats the discount we get for doing a group buy? cheaper postage?

juice
3rd Gear
Posts: 310
Joined: Fri Aug 15, 2008 12:03 am

Post by juice » Sat Feb 19, 2011 8:04 pm

yes on cheaper postage and possibly a better price on the discs.

check out the thread in the b5 section on audisrs
Avus B5 RS4, Miltek down pipes/No cats/Miltek Cat-back, Wagner uprated SMIC's, short shifter, B7 brakes, Phaeton brake ducts, H&R ARB's, H&R Coilovers, AWE DTS, MRC custom Remap + water meth injection = BIG GRIN on my face with poo in my passengers pants

**Now with a Carbon roof**

'Build the best and the rest will follow'

Post Reply

Return to “RS4 (B7 Typ 8E) 2006–2008”

Who is online

Users browsing this forum: No registered users and 173 guests