H & R Springs, anti roll bars, and Miltek exhaust fitted

4.2 V8 32v Naturally Aspirated - 414 bhp
Post Reply
hugeguy
Neutral
Posts: 17
Joined: Sun Apr 22, 2007 7:03 pm

H & R Springs, anti roll bars, and Miltek exhaust fitted

Post by hugeguy » Thu May 10, 2007 9:19 pm

Guys, just had the above fitted today to my RS4 Saloon, and all I can say is that it was money VERY well spent. The car has hardly any body roll and feels so much more tight and directional, and looks more aggresive. It rides over rough surfaces extremely well with no clattering or banging whatsoever. I highly recommend it to anyone thinking of improving the stance and handling. As for the Magnex, I went for the non reso cat back system, which I feel sounds just right without creating a boy racer image. As I live in England, and after some research I decided to use Kim and his crew down at QS Tuning. They were really careful with the car and managed to fit everything by 2.30pm. Kim knows his $hi7 and was extremely helpful. Anyone have any questions feel free to fire. :D

User avatar
Love_iTT
3rd Gear
Posts: 492
Joined: Fri Apr 06, 2007 8:54 pm

RE: H & R Springs, anti roll bars, and Miltek exhaust fi

Post by Love_iTT » Thu May 10, 2007 9:50 pm

Your title says Milltek but you talk about Magnex, I assume you mean Milltek as you went to QS Tuning?

A few pics would be good too. :wink:

Graham

User avatar
youry
1st Gear
Posts: 76
Joined: Tue May 08, 2007 11:20 pm
Location: Nivelles (Belgium)
Contact:

Post by youry » Thu May 10, 2007 11:42 pm

I started by putting HR springs and was diaspointed as it did not lower a lot the car and did not feal much better than stock (just a littleà, if someone is interetd Isell the HR springs for 100 EUR (they are almost new driven for less than 200 Km), now I have placed a KW Variant3 suspension and now we are talking.... but its more expensive of course...

if someoine wants HR springs at a very good deal rpice, send me an e-mail at youry@rsquattro.Com

User avatar
youry
1st Gear
Posts: 76
Joined: Tue May 08, 2007 11:20 pm
Location: Nivelles (Belgium)
Contact:

Post by youry » Thu May 10, 2007 11:44 pm

just reread your post... now I know what made your change its the anti roll bars..... but hte srpings do not do much alone..... shjoudl have read more... still my springs are for sale.... at that price you cannot loose. I want to clean my garage....
AUDI RS5 B9 (2017-2019)
AUDI A6 AVANT 4G (2012-2016
AUDI RS5 B8 (2010-2012)
AUDI A4 AVANT B8 2.0 TD I 120hp, upgraded to 184ch/442Nm used as daily car (09-12)
AUDI A4 RS4 V8 upgraded to with +35hp/+30Nm) (06-08)
PORSCHE 996 TT upgraded to 500hp/700Nm (05-06)

User avatar
sykotoy
3rd Gear
Posts: 437
Joined: Tue Apr 03, 2007 11:20 pm
Location: Sydney
Contact:

Post by sykotoy » Fri May 11, 2007 7:24 am

mY CAR JUST HAD THE h+r SPRINGS AND SWAYS THIS WEEK, MILLTEK NEXT WEEK will post a gazillion pics
RS4 B7 Sedan 2006 Phantom Black
Solar Panel Sunroof / I pod
MODS- H+R Springs / H+R Front/Rear Sway Full Milltek This week
Current B7 RS4 1/4 mile record holder 12.883

E46 M3 SMG sold / But not forgotten
Chrysler Crossfire Roadster - sold

Post Reply

Return to “RS4 (B7 Typ 8E) 2006–2008”

Who is online

Users browsing this forum: No registered users and 91 guests