Door blade

4.2 V8 32v Naturally Aspirated - 414 bhp
mojoe
Neutral
Posts: 13
Joined: Thu Sep 12, 2019 8:42 pm

Re: Door blade

Post by mojoe » Sun Nov 01, 2020 3:50 pm

Finally managed to find one,but had to buy the complete door,and had some damage to the bottom edge.
My body Shop repaired the damage,and painted for £70.

User avatar
jamiej
2nd Gear
Posts: 161
Joined: Tue Apr 03, 2018 4:06 pm

Re: Door blade

Post by jamiej » Sun Nov 01, 2020 3:50 pm

What happened to "Blic"?

Sent from my ONEPLUS A6013 using Tapatalk

Current
'07 - Audi RS4 Avant Daytona Grey
'02 - Audi 8L A3 1.9 TDI (PD)

Gone
'03 Subaru Impreza WRX STI
'96 VW Golf VR6
'91 Toyota MR2 N/A
'90 Peugeot 205 GTI 1.9
'90 VW Mk2 Golf GTI 8V

mojoe
Neutral
Posts: 13
Joined: Thu Sep 12, 2019 8:42 pm

Re: Door blade

Post by mojoe » Sun Nov 01, 2020 3:55 pm

Finally managed to find one,but had to buy the complete door,and the bottom edge had some damage.
My body Shop repaired the damage and painted for £70 :thumbs:

S700REX
Neutral
Posts: 17
Joined: Thu Jun 18, 2020 2:58 pm

Re: Door blade

Post by S700REX » Sat Dec 05, 2020 9:48 am

Does anyone know what’s happened with these door blades being remade? Tried uncle Google but not having much luck!

Miniboy
Neutral
Posts: 9
Joined: Thu Oct 22, 2020 11:37 pm

Re: Door blade

Post by Miniboy » Tue Dec 08, 2020 6:00 pm

Aye I’m also keen to find out. Mine has started bubbling away from the body.

Look595
Neutral
Posts: 24
Joined: Fri Mar 17, 2017 11:22 am

Re: Door blade

Post by Look595 » Thu Dec 17, 2020 8:32 pm

I’ve made contact with ‘blic’ by all accounts they’ve been producing A4 b6 door trims no plans for the b7 platform. ☹️

coffey555
5th Gear
Posts: 1060
Joined: Wed Aug 17, 2011 2:41 pm

Re: Door blade

Post by coffey555 » Thu Dec 17, 2020 9:39 pm

Does the B7 RS4 not use B6 door trims? Good info in the link below:

https://www.audizine.com/forum/showthre ... for-B7-RS4

Standard B6 items are the same as the B7 RS4.
Misano Red RS4 B7 Avant

S700REX
Neutral
Posts: 17
Joined: Thu Jun 18, 2020 2:58 pm

Re: Door blade

Post by S700REX » Sun Dec 27, 2020 10:02 am

Look595 wrote:
Thu Dec 17, 2020 8:32 pm
I’ve made contact with ‘blic’ by all accounts they’ve been producing A4 b6 door trims no plans for the b7 platform. ☹️
The cooking edition b6 is the closest to the b7 RS4 though there appears to be a very subtle difference. I’m not sure if anyone except the most fastidious of owners would notice any difference. I was parked next to a cooking spec b6 the other day and visually they are very similar. Didn’t quite have the balls to crack out a tape measure and see what the difference equates to size wise.

Getting to the point where if they get too much worse I’d accept a set of cooking spec b6 ones whilst keeping an eye out for someone taking on the challenge of reproducing the b7 RS4 ones.

If you see the link come up from ‘blic’ for the b6 ones could you please share to this thread?

DavidRS4
4th Gear
Posts: 638
Joined: Thu Jan 19, 2012 11:16 am
Location: Colchester

Re: Door blade

Post by DavidRS4 » Thu Apr 01, 2021 7:43 pm

With 3D printing being so good these days, could we not get some original new ones. Then have them scanned and printed?
B7 RS4 Saloon, Phantom Black, Forge Oil Cooler Kit, 20 x 10.5j Vossens, Carbon Front Splitter, KW V3 Coilovers, Adjustable Front Arms, 20mm Spacers, Revolution Carbon Air Box, Rear 4 Pot Porsche Brake Conversion, Stud & Nut Kit, Milltek Non Res Non Valved Exhaust, RS6 Gloss Black Grill, Slightly Tinted Windows, JH Motorsports Stage 3R Clutch & Lightweight Flywheel, Robnic Braided Clutch Line. JH Motorsports Lightweight Grooved F & R Rotors with Braided Hoses and Hawk Pads

Post Reply

Return to “RS4 (B7 Typ 8E) 2006–2008”

Who is online

Users browsing this forum: alex760, ewand, MTBear and 39 guests