Do you need longer wheel bolts, and if so, what size?
Thank you!
S5 9x20 fitting advice
S5 9x20 fitting advice
When fitting the OEM S5 9x20ET29 wheels on the B7 RS4 what size spacers are required?
Do you need longer wheel bolts, and if so, what size?
Thank you!
Do you need longer wheel bolts, and if so, what size?
Thank you!
Daytona RS4 Avant - black optics/decat downpipes/H-pipe/KW springs - featured on the 2012 Audi stand at the Goodwood FoS
Re: S5 9x20 fitting advice
It’s around 4mm to clear the calipers but as hubcentric ones aren’t available that thin I used 8mm with no issues and bought 8mm longer bolts.
Spigots are req too
Spigots are req too
Re: S5 9x20 fitting advice
Thanks Daytona.
Did you use 255 or 265 tyres? Any rubbing issues?
Where did you get the spacers/bolts from?
Did you use 255 or 265 tyres? Any rubbing issues?
Where did you get the spacers/bolts from?
Daytona RS4 Avant - black optics/decat downpipes/H-pipe/KW springs - featured on the 2012 Audi stand at the Goodwood FoS
Re: S5 9x20 fitting advice
I’m currently on 255’s but the 265’s I had on before were ok too, suppose it all depends how low the car is.
Pretty sure I got them on eBay, night have been an German seller. I’m thinking of selling the spacers and spigots, if you’re interested give me a pm
Pretty sure I got them on eBay, night have been an German seller. I’m thinking of selling the spacers and spigots, if you’re interested give me a pm
Last edited by Daytona on Fri Jan 10, 2020 1:47 pm, edited 1 time in total.
Re: S5 9x20 fitting advice
I'm interested in the spacers also if you want to drop me a pm I'm on the standard 19s
B7 saloon, koni Shocks and h and r springs, h and r spacers 8mm f+r, milltek non res with valves, milltek d/ps, k and n filter, full mrc carbon clean, mrc stage 2 with l/c and f/s 456bhp 522nm.
Re: S5 9x20 fitting advice
H&R make hub centric spacers with the correct hub size which allow for the hub size difference between the RS4 and S5. That remove the need for separate spigots!
Sent from my iPad using Tapatalk
Sent from my iPad using Tapatalk
Re: S5 9x20 fitting advice
You wont' get 4mm hub centric spacers.
RS4 B7, Mugello Blue, K&W V3 & HR ARBs, set up by Centre Gravity, Milltek Valved Non Res & cat bypass pipes, BMC air filter, braided hoses, DOT 5.1, Terraclean, MRC Full Carbon Clean, MRC remap 448PS 477NM, 20" S7 alloys with 4mm spacers & Hawke spigots 66.6 > 57.1, AP Racing front discs. Sold Sept 2019. Now rocking an F80 M3
Re: S5 9x20 fitting advice
Correct, only from 8mm upwards!Covkiller wrote:You wont' get 4mm hub centric spacers.
Sent from my iPad using Tapatalk
Re: S5 9x20 fitting advice
Fitted with no spacers 255 30 tyres and pretty low
Currently forsale too
Currently forsale too
- Attachments
-
Re: S5 9x20 fitting advice
That looks amazing Rick!
B7 RS4 Saloon, Phantom Black, Forge Oil Cooler Kit, 20 x 10.5j Vossens, Carbon Front Splitter, KW V3 Coilovers, Adjustable Front Arms, 20mm Spacers, Revolution Carbon Air Box, Rear 4 Pot Porsche Brake Conversion, Stud & Nut Kit, Milltek Non Res Non Valved Exhaust, RS6 Gloss Black Grill, Slightly Tinted Windows, JH Motorsports Stage 3R Clutch & Lightweight Flywheel, Robnic Braided Clutch Line. JH Motorsports Lightweight Grooved F & R Rotors with Braided Hoses and Hawk Pads
Re: S5 9x20 fitting advice
thankyou. Changed a bit since then. Wheels, trim, brakes ha ha ,Re: S5 9x20 fitting advice
Post a recent photo then Rick.
maars did you get your 20's on ?
maars did you get your 20's on ?
RS4 B7, Mugello Blue, K&W V3 & HR ARBs, set up by Centre Gravity, Milltek Valved Non Res & cat bypass pipes, BMC air filter, braided hoses, DOT 5.1, Terraclean, MRC Full Carbon Clean, MRC remap 448PS 477NM, 20" S7 alloys with 4mm spacers & Hawke spigots 66.6 > 57.1, AP Racing front discs. Sold Sept 2019. Now rocking an F80 M3
Who is online
Users browsing this forum: No registered users and 148 guests