Rear anti roll bar SS+ vs H&R
Rear anti roll bar SS+ vs H&R
Is there any benifit going for h&r? I have SS+ at the moment
2007 B7 RS4 Saloon, Phantom Black, Forge Oil Cooler Kit, custom home made air feed, H&R Coilovers, H&R anti roll bars, 10mm H&R Spacers, Milltek decat downpipes, Milltek Non Res Valved Exhaust, Reyland Motorsports front & rear discs with Hel braided Hoses, full underbody overhauled inc powdercoated subframes and arms, 034 solid subframe bushes and every joint, arm or bush replaced.
Re: Rear anti roll bar SS+ vs H&R
Yes. Much stiffer. Car becomes much more neutral and flat in cornering.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Re: Rear anti roll bar SS+ vs H&R
Thanks, i wasnt sure whether upgrading an already upgraded bar would be worth it, dont suppose you know whether SS+ anti roll bar clamps can be re used or if they come with the kit?
2007 B7 RS4 Saloon, Phantom Black, Forge Oil Cooler Kit, custom home made air feed, H&R Coilovers, H&R anti roll bars, 10mm H&R Spacers, Milltek decat downpipes, Milltek Non Res Valved Exhaust, Reyland Motorsports front & rear discs with Hel braided Hoses, full underbody overhauled inc powdercoated subframes and arms, 034 solid subframe bushes and every joint, arm or bush replaced.
Re: Rear anti roll bar SS+ vs H&R
You just need the H&R kit no extra parts required. I did the thicker front ARB from H&R at the same time.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
-
- 2nd Gear
- Posts: 121
- Joined: Sun Oct 08, 2017 7:57 pm
Re: Rear anti roll bar SS+ vs H&R
Usually the new bars come with their own rubbers as the diameter of the bar is bigger , the mounting brackets remain standard .
Re: Rear anti roll bar SS+ vs H&R
Does the increase in arb size affect general comfort at all?
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Re: Rear anti roll bar SS+ vs H&R
Yes, it makes the low speed ride quality harsh. There are 2 settings on the ARB's so you could make it softer.
Misano Red RS4 B7 Avant
Re: Rear anti roll bar SS+ vs H&R
Hard to say for me - I did coilovers at the same time. The car feels like it rides much better, but I'm used to performance cars - so depends on what you feel is 'good'.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Re: Rear anti roll bar SS+ vs H&R
Problem is audi made two brackets for SS and SS+ so if i do order the bars will have to see if mine fitShockerboy wrote: ↑Sun Mar 31, 2019 7:31 pmUsually the new bars come with their own rubbers as the diameter of the bar is bigger , the mounting brackets remain standard .
2007 B7 RS4 Saloon, Phantom Black, Forge Oil Cooler Kit, custom home made air feed, H&R Coilovers, H&R anti roll bars, 10mm H&R Spacers, Milltek decat downpipes, Milltek Non Res Valved Exhaust, Reyland Motorsports front & rear discs with Hel braided Hoses, full underbody overhauled inc powdercoated subframes and arms, 034 solid subframe bushes and every joint, arm or bush replaced.
-
- 2nd Gear
- Posts: 121
- Joined: Sun Oct 08, 2017 7:57 pm
Re: Rear anti roll bar SS+ vs H&R
jamesbaby , the thicker A R B shouldnt affect comfort at ALL , The purpose of the anti roll bar is to increase affective spring rates ONLY in cornering to limit body roll .
Re: Rear anti roll bar SS+ vs H&R
Ok thanks for your input. I was thinking of going to the SS+ Arb.
The DRC on my Avant is working fine but to me the rear end feels a little harsh. Springs are all checked and ok. So don’t want to do anything that would make it feel worse.
Sent from my iPhone using Tapatalk
The DRC on my Avant is working fine but to me the rear end feels a little harsh. Springs are all checked and ok. So don’t want to do anything that would make it feel worse.
Sent from my iPhone using Tapatalk
Re: Rear anti roll bar SS+ vs H&R
Ordered myself a set of h&r bars and the SS+ brackets don’t fit which is a pain as I bought new ones, so I either buy new brackets and use the h&r bushes or buy 22mm bushes for the standard brackets
2007 B7 RS4 Saloon, Phantom Black, Forge Oil Cooler Kit, custom home made air feed, H&R Coilovers, H&R anti roll bars, 10mm H&R Spacers, Milltek decat downpipes, Milltek Non Res Valved Exhaust, Reyland Motorsports front & rear discs with Hel braided Hoses, full underbody overhauled inc powdercoated subframes and arms, 034 solid subframe bushes and every joint, arm or bush replaced.
Re: Rear anti roll bar SS+ vs H&R
Do you have a SS+ ARB for sale? If so I’d like to buy it from you.
Springs too if you have them.
Sent from my iPhone using Tapatalk
Springs too if you have them.
Sent from my iPhone using Tapatalk
Who is online
Users browsing this forum: No registered users and 120 guests