Engine Bay Cleaned

4.2 V8 32v Naturally Aspirated - 414 bhp
Post Reply
Mark Park
1st Gear
Posts: 68
Joined: Thu Aug 02, 2018 8:19 pm

Engine Bay Cleaned

Post by Mark Park » Thu Feb 07, 2019 6:18 pm

I was at work and the fork lift driver wanted to see the V8 in all its glory and well he called me a tramp. He them showed me his A6 engine bay and well it was clean as a whiste and he used Autoglym Vinyl and Rubber Care. I went straight to halford's and got a bottle and started cleaning. I just used a detailing brush and a wet microfiber cloth to get all the grime of. I used the oposite end thats pointy on the brush with the cloth wrapped round for the hard to get in bits and then used the Autoglym Vinyl and Rubber Care. I also did my tyres with it and its good stuff. Found out i have 4 different tyres and is a run flat and well thats another story....
Image
Last edited by Mark Park on Thu Feb 07, 2019 9:12 pm, edited 2 times in total.

Mark Park
1st Gear
Posts: 68
Joined: Thu Aug 02, 2018 8:19 pm

Re: Engine Bay Cleaned

Post by Mark Park » Thu Feb 07, 2019 8:18 pm

I would say not bad for 129k :) shown you mine show me your's :P

super7
1st Gear
Posts: 57
Joined: Fri Mar 30, 2018 1:08 pm

Re: Engine Bay Cleaned

Post by super7 » Fri Feb 08, 2019 12:47 am

That looks great! Awesome job!

User avatar
MikeFish
Cruising
Posts: 15019
Joined: Tue Aug 31, 2010 9:23 pm
Location: The Middle of Somewhere

Re: Engine Bay Cleaned

Post by MikeFish » Fri Feb 08, 2019 1:27 am

Screenshot_20190208-002209_Gallery.jpg

Mark Park
1st Gear
Posts: 68
Joined: Thu Aug 02, 2018 8:19 pm

Re: Engine Bay Cleaned

Post by Mark Park » Fri Feb 08, 2019 7:03 am

Looks a lot better with that intake mate, bet that cost a pretty penny 👍

User avatar
Covkiller
Top Gear
Posts: 2202
Joined: Fri Mar 28, 2008 3:44 pm
Location: Coventry

Re: Engine Bay Cleaned

Post by Covkiller » Fri Feb 08, 2019 2:43 pm

Mark Park well done it looks very tidy :thumbs:
RS4 B7, Mugello Blue, K&W V3 & HR ARBs, set up by Centre Gravity, Milltek Valved Non Res & cat bypass pipes, BMC air filter, braided hoses, DOT 5.1, Terraclean, MRC Full Carbon Clean, MRC remap 448PS 477NM, 20" S7 alloys with 4mm spacers & Hawke spigots 66.6 > 57.1, AP Racing front discs.

User avatar
MikeFish
Cruising
Posts: 15019
Joined: Tue Aug 31, 2010 9:23 pm
Location: The Middle of Somewhere

Re: Engine Bay Cleaned

Post by MikeFish » Fri Feb 08, 2019 8:57 pm

Mark Park wrote:
Fri Feb 08, 2019 7:03 am
Looks a lot better with that intake mate, bet that cost a pretty penny 👍
It was £650 is memory serves me right. A third of what my RS6 one cost.

A new expansion tank from Audi is only about £18 and easy to fit. Makes a big difference to the engine bay.

Mark Park
1st Gear
Posts: 68
Joined: Thu Aug 02, 2018 8:19 pm

Re: Engine Bay Cleaned

Post by Mark Park » Sat Feb 09, 2019 9:01 pm

Image

Looks good for 12 years old :)

aby1
Neutral
Posts: 27
Joined: Sun May 15, 2016 12:09 pm

Re: Engine Bay Cleaned

Post by aby1 » Sun Feb 10, 2019 8:07 pm

Mine cleaned few days ago with 60k onImageImage

Sent from my ONEPLUS A3003 using Tapatalk


Mark Park
1st Gear
Posts: 68
Joined: Thu Aug 02, 2018 8:19 pm

Re: Engine Bay Cleaned

Post by Mark Park » Mon Feb 11, 2019 9:34 pm

aby1 wrote:
Sun Feb 10, 2019 8:07 pm
Mine cleaned few days ago with 60k onImageImage

Sent from my ONEPLUS A3003 using Tapatalk
Looks amazing mate

Post Reply

Return to “RS4 (B7 Typ 8E) 2006–2008”

Who is online

Users browsing this forum: Bristol RS, coffey555, Google Adsense [Bot] and 78 guests