Front ARB Thickness

4.2 V8 32v Naturally Aspirated - 414 bhp
Post Reply
Daytona
3rd Gear
Posts: 268
Joined: Tue Dec 31, 2013 7:10 pm

Front ARB Thickness

Post by Daytona » Fri Jan 18, 2019 11:49 pm

Following on from my previous post re. SS+ front ARB thickness, could someone with non SS+ measure their front ARB with some verniers please?
I ask as I fitted some poly bushes and they’ve disintergrated quite possibly because the manufacturer like most owners assumed the ARB was 29mm when in fact it’s 31.5mm.
Thanks in advance

coffey555
5th Gear
Posts: 1137
Joined: Wed Aug 17, 2011 2:41 pm

Re: Front ARB Thickness

Post by coffey555 » Sat Jan 19, 2019 1:19 pm

As far as I know, the front ARB is the same size on both SS and SS+.

Only the rear ARB is thicker on the SS+.

I am running H&R ARB's front and back now but sure somebody will confirm the front ARB size.
Misano Red RS4 B7 Avant

User avatar
alex760
1st Gear
Posts: 69
Joined: Sat Nov 19, 2016 2:20 pm

Re: Front ARB Thickness

Post by alex760 » Sat Jan 19, 2019 4:00 pm

I just dipped under and measured the corner where it joins the ARB link as that's all I can access in my current lazy condition.

My non SS also measures 31.5 or thereabouts with the Vernier.

Post Reply

Return to “RS4 (B7 Typ 8E) 2006–2008”

Who is online

Users browsing this forum: JRC1 and 369 guests