SS+ Owners, Help Req
SS+ Owners, Help Req
Could somebody with SS+ measure their front ARB for me please?
After a bit of research it appears pretty much all A4’s including RS4’s with or without SS+ have a 29mm front ARB, yet mine is 31.5mm. Maybe it’s 29mm before it’s powdercoated or someone’s stuck a thicker one on but it looks factory.
Thanks in advance
After a bit of research it appears pretty much all A4’s including RS4’s with or without SS+ have a 29mm front ARB, yet mine is 31.5mm. Maybe it’s 29mm before it’s powdercoated or someone’s stuck a thicker one on but it looks factory.
Thanks in advance
SS+ Owners, Help Req
Only the rear arb is different on ss+
The front are the same 29mm
Rear SS+ 22mm
Rear Non SS+ 20mm
Ss+ sits 10mm lower at rear
Sent from my iPhone using Tapatalk
The front are the same 29mm
Rear SS+ 22mm
Rear Non SS+ 20mm
Ss+ sits 10mm lower at rear
Sent from my iPhone using Tapatalk
Re: SS+ Owners, Help Req
2.5mm of powder seems a lot. Got a picture of it by any chance? Preferably part number and maybe the end bit?
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
ilya, photographer http://www.ikrylov.com
RS4 B7 aka Vinnie
AMD stage2|De-coked|GruppeM|CAF|Eibach arbs|BilsteinB14|Goodridge hoses|DS3000|phaeton brake ducts|Led tail lights|Trups DTRL|LED interior|JcWeldFab|034 motorsport endlinks, mounts and bushings|ECS Differential Mount|JHM short shift|JHM intake spacers|8/10mm H&R|R2D2 10" sub and AMP|Corbeau seats|4point harness
RS4 B7 aka Vinnie
AMD stage2|De-coked|GruppeM|CAF|Eibach arbs|BilsteinB14|Goodridge hoses|DS3000|phaeton brake ducts|Led tail lights|Trups DTRL|LED interior|JcWeldFab|034 motorsport endlinks, mounts and bushings|ECS Differential Mount|JHM short shift|JHM intake spacers|8/10mm H&R|R2D2 10" sub and AMP|Corbeau seats|4point harness
Re: SS+ Owners, Help Req
My H&R arb’s on my previous car were dark blue
If yours are bingo
Sent from my iPhone using Tapatalk
If yours are bingo
Sent from my iPhone using Tapatalk
Re: SS+ Owners, Help Req
Pule, I thought 2.5mm of powder coat was a lot but it’s only 1.25mm per side so possible I suppose.
As for a part number, that would have made life a lot easier but the Sticker fell if ages ago! It was definitely an OE number and it looks OE to be fair, black with female threaded ends.
As for a part number, that would have made life a lot easier but the Sticker fell if ages ago! It was definitely an OE number and it looks OE to be fair, black with female threaded ends.
Re: SS+ Owners, Help Req
Will measure mine tonight for you
2007 B7 RS4 Saloon, Phantom Black, Forge Oil Cooler Kit, custom home made air feed, H&R Coilovers, H&R anti roll bars, 10mm H&R Spacers, Milltek decat downpipes, Milltek Non Res Valved Exhaust, Reyland Motorsports front & rear discs with Hel braided Hoses, full underbody overhauled inc powdercoated subframes and arms, 034 solid subframe bushes and every joint, arm or bush replaced.
Re: SS+ Owners, Help Req
That’d be great if you could James
Re: SS+ Owners, Help Req
Mine is 31.5 also.
2007 B7 RS4 Saloon, Phantom Black, Forge Oil Cooler Kit, custom home made air feed, H&R Coilovers, H&R anti roll bars, 10mm H&R Spacers, Milltek decat downpipes, Milltek Non Res Valved Exhaust, Reyland Motorsports front & rear discs with Hel braided Hoses, full underbody overhauled inc powdercoated subframes and arms, 034 solid subframe bushes and every joint, arm or bush replaced.
Re: SS+ Owners, Help Req
Problem solved
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
ilya, photographer http://www.ikrylov.com
RS4 B7 aka Vinnie
AMD stage2|De-coked|GruppeM|CAF|Eibach arbs|BilsteinB14|Goodridge hoses|DS3000|phaeton brake ducts|Led tail lights|Trups DTRL|LED interior|JcWeldFab|034 motorsport endlinks, mounts and bushings|ECS Differential Mount|JHM short shift|JHM intake spacers|8/10mm H&R|R2D2 10" sub and AMP|Corbeau seats|4point harness
RS4 B7 aka Vinnie
AMD stage2|De-coked|GruppeM|CAF|Eibach arbs|BilsteinB14|Goodridge hoses|DS3000|phaeton brake ducts|Led tail lights|Trups DTRL|LED interior|JcWeldFab|034 motorsport endlinks, mounts and bushings|ECS Differential Mount|JHM short shift|JHM intake spacers|8/10mm H&R|R2D2 10" sub and AMP|Corbeau seats|4point harness
Re: SS+ Owners, Help Req
Threaded should be OE. Possibly the front Hotchkiss bar is threaded too, can’t remember but doesn’t sound like you have that one anyway. Also think that one is 35mm (could be wrong).Daytona wrote: ↑Sat Dec 29, 2018 10:49 amPule, I thought 2.5mm of powder coat was a lot but it’s only 1.25mm per side so possible I suppose.
As for a part number, that would have made life a lot easier but the Sticker fell if ages ago! It was definitely an OE number and it looks OE to be fair, black with female threaded ends.
Re: SS+ Owners, Help Req
Not unless we both are, mine still has the audi part number Sticker on too.
2007 B7 RS4 Saloon, Phantom Black, Forge Oil Cooler Kit, custom home made air feed, H&R Coilovers, H&R anti roll bars, 10mm H&R Spacers, Milltek decat downpipes, Milltek Non Res Valved Exhaust, Reyland Motorsports front & rear discs with Hel braided Hoses, full underbody overhauled inc powdercoated subframes and arms, 034 solid subframe bushes and every joint, arm or bush replaced.