20 inch wheels!

4.2 V8 32v Naturally Aspirated - 414 bhp
MrRSB7
1st Gear
Posts: 64
Joined: Sun Nov 04, 2018 11:08 pm

20 inch wheels!

Post by MrRSB7 » Mon Nov 26, 2018 11:10 am

Hi

I am looking for a set of 20inch alloys for my B7 Rs 2006


Are there any genuine Audi wheels which are a easy fit that I should be looking for ?

User avatar
Brooner
Cruising
Posts: 3397
Joined: Mon Jan 20, 2003 5:12 am
Location: Scotlandshire

Re: 20 inch wheels!

Post by Brooner » Mon Nov 26, 2018 11:59 am

are you looking for originals or after market
there were a few sets on the parts section go have a look and post up a wanted add im sure you'll get a set

User avatar
MikeFish
Cruising
Posts: 14743
Joined: Tue Aug 31, 2010 9:23 pm
Location: The Middle of Somewhere

Re: 20 inch wheels!

Post by MikeFish » Mon Nov 26, 2018 2:10 pm

The B8 RS4 / RS5 rotors look really good on the B7 but quite common now.
The C7 RS6 20 inch wheels also look good but a bit tighter fit and won't work if you have ceramics.
RS6 Performance Panther Black KW Adjustable springs, Milltek Non-Res, exhaust valves disconnected & valve delete units fitted, TSW Bathurst, Eventuri intake

RS6 build thread: http://forum.rs246.com/viewtopic.php?f=76&t=119147

User avatar
Brooner
Cruising
Posts: 3397
Joined: Mon Jan 20, 2003 5:12 am
Location: Scotlandshire

Re: 20 inch wheels!

Post by Brooner » Mon Nov 26, 2018 2:55 pm

Though the 20" RS6 alloys are like hens teeth

MrRSB7
1st Gear
Posts: 64
Joined: Sun Nov 04, 2018 11:08 pm

Re: 20 inch wheels!

Post by MrRSB7 » Mon Nov 26, 2018 4:44 pm

Hens teeth??

Sharp?

User avatar
Brooner
Cruising
Posts: 3397
Joined: Mon Jan 20, 2003 5:12 am
Location: Scotlandshire

Re: 20 inch wheels!

Post by Brooner » Mon Nov 26, 2018 4:58 pm

very rare that their for sale

hen’s teeth

plural of hen's tooth
(idiomatic) anything very rare or impossible to obtain is said to be like finding hen's teeth

:biggrin3:

User avatar
BenHol
2nd Gear
Posts: 225
Joined: Fri Sep 16, 2016 9:26 pm

Re: 20 inch wheels!

Post by BenHol » Wed Nov 28, 2018 11:21 pm

MikeFish wrote:The B8 RS4 / RS5 rotors look really good on the B7 but quite common now.
The C7 RS6 20 inch wheels also look good but a bit tighter fit and won't work if you have ceramics.
Image



Sent from my iPhone using Tapatalk
RS4 B7 - Phantom Black, 20in RS6 C7 alloys, Joey mod, detango, led drl, black optics, Bilstein b16, Michelin ps4s, centre res delete, black tips, 8mm spacers, vx lenses, RS embossed xenon, Carbon splitter, 034 ARB.

User avatar
MikeFish
Cruising
Posts: 14743
Joined: Tue Aug 31, 2010 9:23 pm
Location: The Middle of Somewhere

Re: 20 inch wheels!

Post by MikeFish » Wed Nov 28, 2018 11:29 pm

BenHol wrote:
Wed Nov 28, 2018 11:21 pm
MikeFish wrote:The B8 RS4 / RS5 rotors look really good on the B7 but quite common now.
The C7 RS6 20 inch wheels also look good but a bit tighter fit and won't work if you have ceramics.
Image



Sent from my iPhone using Tapatalk
Hmmm, Jon tried it and said they wouldn't fit.
RS6 Performance Panther Black KW Adjustable springs, Milltek Non-Res, exhaust valves disconnected & valve delete units fitted, TSW Bathurst, Eventuri intake

RS6 build thread: http://forum.rs246.com/viewtopic.php?f=76&t=119147

User avatar
FaisalJ
Cruising
Posts: 2576
Joined: Mon Mar 23, 2015 1:03 pm
Location: Surrey

Re: 20 inch wheels!

Post by FaisalJ » Thu Nov 29, 2018 9:13 am

MikeFish wrote:
BenHol wrote:
Wed Nov 28, 2018 11:21 pm
MikeFish wrote:The B8 RS4 / RS5 rotors look really good on the B7 but quite common now.
The C7 RS6 20 inch wheels also look good but a bit tighter fit and won't work if you have ceramics.
Image



Sent from my iPhone using Tapatalk
Hmmm, Jon tried it and said they wouldn't fit.
That’s what I was thinking.

Any details on that car? Looks like it might still be at OEM (non-sport) ride height which would help with arch clearance when spacing the wheels to clear The calipers . Perhaps narrow tyres too.


Sent from my iPhone using Tapatalk
Image
2007 RS4 B7 Avant
Phantom Black | Black Optics | MRC Stage 2 | JC Weldfab Exhaust | KW V3 coilovers | H&R ARBs | 20" Ispiri ISR-8 | Titanium wing mirrors | Driving Passion Diffuser | CF Air Intake | Manifold deflap | Alcantara/leather retrim | TT RS Steering Wheel | Pioneer Apple Carplay HU, JL amp and sub, Focal components | Clear Headlight Lenses, Black Internals, 6000K Bulbs | Trups LEDs | LED Tail lights |

User avatar
Covkiller
Top Gear
Posts: 2122
Joined: Fri Mar 28, 2008 3:44 pm
Location: Coventry

Re: 20 inch wheels!

Post by Covkiller » Thu Nov 29, 2018 9:20 am

Unless you're low B7 RS4's look like they're on stilts with 20's. You're also entering a world of tyre rubbing, split lip and adaptation.
RS4 B7, Mugello Blue, K&W V3 & HR ARBs, set up by Centre Gravity, Milltek Valved Non Res & cat bypass pipes, BMC air filter, braided hoses, DOT 5.1, Terraclean, MRC Full Carbon Clean, MRC remap 448PS 477NM, 20" S7 alloys with 4mm spacers & Hawke spigots 66.6 > 57.1, AP Racing front discs.

User avatar
MikeFish
Cruising
Posts: 14743
Joined: Tue Aug 31, 2010 9:23 pm
Location: The Middle of Somewhere

Re: 20 inch wheels!

Post by MikeFish » Thu Nov 29, 2018 9:39 am

FaisalJ wrote:
Thu Nov 29, 2018 9:13 am
MikeFish wrote:
BenHol wrote:
Wed Nov 28, 2018 11:21 pm

Image



Sent from my iPhone using Tapatalk
Hmmm, Jon tried it and said they wouldn't fit.
That’s what I was thinking.

Any details on that car? Looks like it might still be at OEM (non-sport) ride height which would help with arch clearance when spacing the wheels to clear The calipers . Perhaps narrow tyres too.


Sent from my iPhone using Tapatalk
Ahh, yes maybe it was because Jon's car is quite low.
RS6 Performance Panther Black KW Adjustable springs, Milltek Non-Res, exhaust valves disconnected & valve delete units fitted, TSW Bathurst, Eventuri intake

RS6 build thread: http://forum.rs246.com/viewtopic.php?f=76&t=119147

Softishman
2nd Gear
Posts: 150
Joined: Thu Jul 28, 2016 11:52 pm

Re: 20 inch wheels!

Post by Softishman » Thu Nov 29, 2018 10:35 am

Image

Image
Sure😉

This is with 400mm ceramics and 10mm spacer.
@softishman on IG
Check out my RS4 there!

User avatar
FaisalJ
Cruising
Posts: 2576
Joined: Mon Mar 23, 2015 1:03 pm
Location: Surrey

Re: 20 inch wheels!

Post by FaisalJ » Thu Nov 29, 2018 10:46 am

Holy shitballs


Sent from my iPhone using Tapatalk
Image
2007 RS4 B7 Avant
Phantom Black | Black Optics | MRC Stage 2 | JC Weldfab Exhaust | KW V3 coilovers | H&R ARBs | 20" Ispiri ISR-8 | Titanium wing mirrors | Driving Passion Diffuser | CF Air Intake | Manifold deflap | Alcantara/leather retrim | TT RS Steering Wheel | Pioneer Apple Carplay HU, JL amp and sub, Focal components | Clear Headlight Lenses, Black Internals, 6000K Bulbs | Trups LEDs | LED Tail lights |

Eddie555
Top Gear
Posts: 2477
Joined: Sat Jan 31, 2015 11:54 pm

Re: 20 inch wheels!

Post by Eddie555 » Thu Nov 29, 2018 11:40 am

Softishman wrote:
Thu Nov 29, 2018 10:35 am
Image

Image
Sure😉

This is with 400mm ceramics and 10mm spacer.
That looks to have some negative camber, about minus 2-3 degree?
Current ride’s
Q7 Floret Silver Black Edition On 22’s (2018)
Renault Clio 172 Cup. (Babe the track pig)

Previous rides
SQ5 Glacier white( 2016 65reg)
RS6 avant C7 Daytona Grey 2015 facelift. The one I waved goodbye to!!
2013: Q7 3.0 tdi s/line plus ibis white (13reg)
2012: S5 cabriolet glacier white (62 reg)
2011: RS4 saloon B7. Avus (57 reg)

User avatar
bam_bam
Cruising
Posts: 14341
Joined: Mon Jan 18, 2010 9:08 pm
Location: London

Re: 20 inch wheels!

Post by bam_bam » Thu Nov 29, 2018 1:39 pm

Eddie555 wrote:
Thu Nov 29, 2018 11:40 am
Softishman wrote:
Thu Nov 29, 2018 10:35 am
Image

Image
Sure😉

This is with 400mm ceramics and 10mm spacer.
That looks to have some negative camber, about minus 2-3 degree?
Because racecar!
No matter where you go, there you are.

Post Reply

Return to “RS4 (B7 Typ 8E) 2006–2008”

Who is online

Users browsing this forum: fjpc, marc1, MrRSB7, Quango86 and 65 guests