Bumper poking out

4.2 V8 32v Naturally Aspirated - 414 bhp
Post Reply
Sunshine88
Neutral
Posts: 20
Joined: Sat Nov 10, 2018 11:59 pm

Bumper poking out

Post by Sunshine88 » Sun Nov 18, 2018 3:13 pm

Afternoon all
Was wondering if I could sort this out as it’s really bugging me?
Attachments
BE90AEFA-5E78-43E8-AA60-749749FF8489.jpeg
7458E9AB-AB91-4DB1-A9D3-F2D003FD9C30.jpeg
12BFB33C-9B4B-45C6-A077-E00410BB0225.jpeg
5205D79B-0FB8-434C-874A-C76ECAFF523A.jpeg

User avatar
Markwes
2nd Gear
Posts: 111
Joined: Fri Aug 14, 2015 12:28 pm
Location: Nottingham

Re: Bumper poking out

Post by Markwes » Sun Nov 18, 2018 4:03 pm

There should be a small torx head screw behind the arch liner which holds the bumper to the wing. It looks like it’s missing from the pics.


Sent from my iPhone using Tapatalk
Audi RS6 c7 2014| Estoril Blue | Dynamic pack | Sports Exhaust.

Sunshine88
Neutral
Posts: 20
Joined: Sat Nov 10, 2018 11:59 pm

Re: Bumper poking out

Post by Sunshine88 » Sun Nov 18, 2018 7:41 pm

Markwes wrote:
Sun Nov 18, 2018 4:03 pm
There should be a small torx head screw behind the arch liner which holds the bumper to the wing. It looks like it’s missing from the pics.


Sent from my iPhone using Tapatalk
Got any pics of yours???? Please mate

Sunshine88
Neutral
Posts: 20
Joined: Sat Nov 10, 2018 11:59 pm

Re: Bumper poking out

Post by Sunshine88 » Sun Nov 18, 2018 8:14 pm

More pics here
Thanks for any help
Attachments
F6168AC9-4447-4889-B445-0FF3D8A1C5F2.jpeg
4696C041-88A4-4458-8FE3-C06BAE52ABB1.jpeg
86EDCECA-F686-4CB3-B75C-F0BDBEB24695.jpeg

MrRSB7
1st Gear
Posts: 86
Joined: Sun Nov 04, 2018 11:08 pm

Re: Bumper poking out

Post by MrRSB7 » Sun Nov 18, 2018 8:23 pm

Spacers too big perhaps?

What caused this?
2006 2-tone merlin purple , decat delete, res delete, x-pipe and rear back box delete......rs5 alloys.. silver brake callipers

User avatar
Markwes
2nd Gear
Posts: 111
Joined: Fri Aug 14, 2015 12:28 pm
Location: Nottingham

Re: Bumper poking out

Post by Markwes » Sun Nov 18, 2018 8:26 pm

Sunshine88 wrote:
Markwes wrote:
Sun Nov 18, 2018 4:03 pm
There should be a small torx head screw behind the arch liner which holds the bumper to the wing. It looks like it’s missing from the pics.


Sent from my iPhone using Tapatalk
Got any pics of yours???? Please mate
I’ve not got mine anymore, sold it recently for an RS6. From what I can remember, if you remove a few of the arch lining screws you’ll be able to pull the arch liner back enough so you can see behind.Image
The screw should be roughly where I’ve circled the picture although from looking at your pictures it seems like your bumper has some damage so maybe this fixing point & screw has been broken off.


Sent from my iPhone using Tapatalk
Audi RS6 c7 2014| Estoril Blue | Dynamic pack | Sports Exhaust.

Eddie555
Cruising
Posts: 2507
Joined: Sat Jan 31, 2015 11:54 pm

Re: Bumper poking out

Post by Eddie555 » Sun Nov 18, 2018 8:31 pm

This will give you and idea of how it all comes apart.

https://www.audizine.com/forum/showthre ... -of-Bumper
Current ride’s
Q7 Floret Silver Black Edition On 22’s (2018)
Renault Clio 172 Cup. (Babe the track pig)

Previous rides
SQ5 Glacier white( 2016 65reg)
RS6 avant C7 Daytona Grey 2015 facelift. The one I waved goodbye to!!
2013: Q7 3.0 tdi s/line plus ibis white (13reg)
2012: S5 cabriolet glacier white (62 reg)
2011: RS4 saloon B7. Avus (57 reg)

Sunshine88
Neutral
Posts: 20
Joined: Sat Nov 10, 2018 11:59 pm

Re: Bumper poking out

Post by Sunshine88 » Sun Nov 18, 2018 8:38 pm

Eddie555 wrote:
Sun Nov 18, 2018 8:31 pm
This will give you and idea of how it all comes apart.

https://www.audizine.com/forum/showthre ... -of-Bumper

Is this different setup on the front tho?

Eddie555
Cruising
Posts: 2507
Joined: Sat Jan 31, 2015 11:54 pm

Re: Bumper poking out

Post by Eddie555 » Sun Nov 18, 2018 8:44 pm

Sunshine88 wrote:
Sun Nov 18, 2018 8:38 pm
Eddie555 wrote:
Sun Nov 18, 2018 8:31 pm
This will give you and idea of how it all comes apart.

https://www.audizine.com/forum/showthre ... -of-Bumper

Is this different setup on the front tho?
It all looks the same to me. And if you “search” this forum others have used this guide. Anything you need to know about your car will have been covered somewhere within this forum. Just use the “search” button (the little magnifying glass) in the top right and all will come up.
Current ride’s
Q7 Floret Silver Black Edition On 22’s (2018)
Renault Clio 172 Cup. (Babe the track pig)

Previous rides
SQ5 Glacier white( 2016 65reg)
RS6 avant C7 Daytona Grey 2015 facelift. The one I waved goodbye to!!
2013: Q7 3.0 tdi s/line plus ibis white (13reg)
2012: S5 cabriolet glacier white (62 reg)
2011: RS4 saloon B7. Avus (57 reg)

Sunshine88
Neutral
Posts: 20
Joined: Sat Nov 10, 2018 11:59 pm

Re: Bumper poking out

Post by Sunshine88 » Sun Nov 18, 2018 10:31 pm

Tried the forum and there no pics at all or info!! Back bumper is deffo different to the back! And must be someone on here with a pic of there’s 🤔

User avatar
MB2
Top Gear
Posts: 1575
Joined: Tue Dec 15, 2009 10:21 am

Re: Bumper poking out

Post by MB2 » Wed Nov 28, 2018 10:55 am


User avatar
dhali
4th Gear
Posts: 867
Joined: Sat Oct 02, 2004 7:44 pm

Re: Bumper poking out

Post by dhali » Wed Nov 28, 2018 11:04 am

Looks as if your fixing point is broken off . You will have to fabricate something to make a new fixing point or secure your old one if it's still there .

Post Reply

Return to “RS4 (B7 Typ 8E) 2006–2008”

Who is online

Users browsing this forum: No registered users and 234 guests