Probably already a long line of people already waiting but I’m after a carbon induction kit if anyone has one. Reddies waiting!!!
Sent from my iPhone using Tapatalk
WANTED!!! INDUCTION KIT!!
Re: WANTED!!! INDUCTION KIT!!
But why? Really isn’t much in terms of performance gains and if anything they’re rubbish and burn out MAFS. There is serious heat coming off them. You are honestly better off with a BMC high flow filter combined with a cold air feed.
If it’s just for looks okay I get it.
If it’s just for looks okay I get it.
Re: WANTED!!! INDUCTION KIT!!
+1 and if you are prepared to modify the airbox a little a 100mm duct can be used.RS4LAD wrote: ↑Sun Oct 28, 2018 8:55 pmBut why? Really isn’t much in terms of performance gains and if anything they’re rubbish and burn out MAFS. There is serious heat coming off them. You are honestly better off with a BMC high flow filter combined with a cold air feed.
If it’s just for looks okay I get it.
2007 B7 RS4 Saloon, Phantom Black, Forge Oil Cooler Kit, custom home made air feed, H&R Coilovers, H&R anti roll bars, 10mm H&R Spacers, Milltek decat downpipes, Milltek Non Res Valved Exhaust, Reyland Motorsports front & rear discs with Hel braided Hoses, full underbody overhauled inc powdercoated subframes and arms, 034 solid subframe bushes and every joint, arm or bush replaced.
Re: WANTED!!! INDUCTION KIT!!
You will get a a proper Nascar sound. But heat soak will drop your BHP. It's been done to death on here. Doug bought my Gruppe-M induction kit and tried to negate the heat soak and couldn't.
RS4 B7, Mugello Blue, K&W V3 & HR ARBs, set up by Centre Gravity, Milltek Valved Non Res & cat bypass pipes, BMC air filter, braided hoses, DOT 5.1, Terraclean, MRC Full Carbon Clean, MRC remap 448PS 477NM, 20" S7 alloys with 4mm spacers & Hawke spigots 66.6 > 57.1, AP Racing front discs. Sold Sept 2019. Now rocking an F80 M3
Re: WANTED!!! INDUCTION KIT!!
Only after looks and sound, not bothered by loosing a few ponies, I drive it on congested public roads not race tracks.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Re: WANTED!!! INDUCTION KIT!!
I changed the 89mm MRC cold air feed to a 102mm one with my Revolution air intake and made a huge difference to the heat soak.
Re: WANTED!!! INDUCTION KIT!!
Im just on with adding a 100mm pipe, lots of scraped knuckles
2007 B7 RS4 Saloon, Phantom Black, Forge Oil Cooler Kit, custom home made air feed, H&R Coilovers, H&R anti roll bars, 10mm H&R Spacers, Milltek decat downpipes, Milltek Non Res Valved Exhaust, Reyland Motorsports front & rear discs with Hel braided Hoses, full underbody overhauled inc powdercoated subframes and arms, 034 solid subframe bushes and every joint, arm or bush replaced.
Who is online
Users browsing this forum: Lenine666 and 204 guests