Clutch and Flywheel Replacement

4.2 V8 32v Naturally Aspirated - 414 bhp
Post Reply
super7
1st Gear
Posts: 99
Joined: Fri Mar 30, 2018 1:08 pm

Clutch and Flywheel Replacement

Post by super7 » Thu Oct 18, 2018 2:06 pm

Following on from my post re. synchromesh issue I'm having with 2nd. I was considering if the gearbox needs to come out doing the clutch and flywheel at the same time. Car is at 78k miles now so seems worthwhile.

What are the recommendations? Stock Audi or are there better alternatives?

Mat20vt
2nd Gear
Posts: 208
Joined: Sun Sep 18, 2016 10:23 am

Re: Clutch and Flywheel Replacement

Post by Mat20vt » Thu Oct 18, 2018 5:34 pm

I stuck with oem clutch and dual mass. Upgraded to the robnic clutch pipe.
Previously big turbo'd mk4 golf, big turbo'd Audi A3 Quattro
Currently remapped vw caddy
& 2009 rs4 saloon, TTS supercharged, mrc mapped, miltek catback, kwv3, h&r arbs, gutted precats, ceramic brakes 610bhp 👍

marc1
Cruising
Posts: 3288
Joined: Sun Jan 31, 2010 4:46 pm

Re: Clutch and Flywheel Replacement

Post by marc1 » Thu Oct 18, 2018 10:33 pm

Light weight single mass flywheel. Half the cost, half the weight, freer revving.

James1984
3rd Gear
Posts: 309
Joined: Wed Apr 05, 2017 11:14 am

Re: Clutch and Flywheel Replacement

Post by James1984 » Fri Oct 19, 2018 1:22 pm

Ttv racing do a billet flywheel for about £360, i had one on a Peugeot 306 rallye and the quality was spot on

http://ttvracing.com/product/audi-rs4-4 ... turer=audi
2007 B7 RS4 Saloon, Phantom Black, Forge Oil Cooler Kit, custom home made air feed, H&R Coilovers, H&R anti roll bars, 10mm H&R Spacers, Milltek decat downpipes, Milltek Non Res Valved Exhaust, Reyland Motorsports front & rear discs with Hel braided Hoses, full underbody overhauled inc powdercoated subframes and arms, 034 solid subframe bushes and every joint, arm or bush replaced.

akoblivius
Neutral
Posts: 39
Joined: Thu Nov 27, 2014 3:40 pm

Re: Clutch and Flywheel Replacement

Post by akoblivius » Mon Oct 22, 2018 5:44 pm

super7 wrote:
Thu Oct 18, 2018 2:06 pm
Following on from my post re. synchromesh issue I'm having with 2nd. I was considering if the gearbox needs to come out doing the clutch and flywheel at the same time. Car is at 78k miles now so seems worthwhile.

What are the recommendations? Stock Audi or are there better alternatives?
hi,after two weeks,i will upload one set of oem dual mass flywheel and clutch kit for very reasonable price.
i installed to my car around 14.000km before,now i'm doing the supercharger upgrade,so that kit is not enough,i will upload to sell.

If you want to save some money,maybe could be a good decision.

thanks

Post Reply

Return to “RS4 (B7 Typ 8E) 2006–2008”

Who is online

Users browsing this forum: No registered users and 525 guests