Hi guys I've got a 6 hour journey to London and back tomorrow to collect some rs4 20 9j et26 genuine alloys to fit my b7 can some on advice me what spigot rings I need to buy and from were?
I've got standard 19 9j et29 standard Llysfaen on at the mo with 8mm spacers all round will the rotors sit further in the arch or will I need spacers for these?? Thanks in advance
Rotors alloys
-
- 3rd Gear
- Posts: 378
- Joined: Thu Feb 13, 2014 10:42 pm
Rotors alloys
Rs4 b7 In avus silver with b14 Bilstein coilovers, centre resonator delete with x pipe and piggie cats gutted
Headlights detangoed trups led kit drl reverse and numberplate kit
Previous audi
rs6 c5 - mrc stage 2 remap-itg filters-forge dumpers-center decat with miltek kw coilovers- h and r
I call her the growler lol
Headlights detangoed trups led kit drl reverse and numberplate kit
Previous audi
rs6 c5 - mrc stage 2 remap-itg filters-forge dumpers-center decat with miltek kw coilovers- h and r
I call her the growler lol
Re: Rotors alloys
Paisleyfreight
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Re: Rotors alloys
You need some 66.6 to 57.1 spigot rings. They will fit fine with no spacers but depends on your personal preference and riding height.
-
- 3rd Gear
- Posts: 378
- Joined: Thu Feb 13, 2014 10:42 pm
Re: Rotors alloys
Cheers Mike
Rs4 b7 In avus silver with b14 Bilstein coilovers, centre resonator delete with x pipe and piggie cats gutted
Headlights detangoed trups led kit drl reverse and numberplate kit
Previous audi
rs6 c5 - mrc stage 2 remap-itg filters-forge dumpers-center decat with miltek kw coilovers- h and r
I call her the growler lol
Headlights detangoed trups led kit drl reverse and numberplate kit
Previous audi
rs6 c5 - mrc stage 2 remap-itg filters-forge dumpers-center decat with miltek kw coilovers- h and r
I call her the growler lol
Re: Rotors alloys
I've use these, they are really good quality. They need a bit a of tapping in but they're rock solid.
https://www.ebay.co.uk/itm/HAWKE-Spigot ... 2477494410
https://www.ebay.co.uk/itm/HAWKE-Spigot ... 2477494410
RS4 B7, Mugello Blue, K&W V3 & HR ARBs, set up by Centre Gravity, Milltek Valved Non Res & cat bypass pipes, BMC air filter, braided hoses, DOT 5.1, Terraclean, MRC Full Carbon Clean, MRC remap 448PS 477NM, 20" S7 alloys with 4mm spacers & Hawke spigots 66.6 > 57.1, AP Racing front discs. Sold Sept 2019. Now rocking an F80 M3