Oil Pipe Fitting's

4.2 V8 32v Naturally Aspirated - 414 bhp
Post Reply
Evopilot
Neutral
Posts: 30
Joined: Tue Aug 14, 2018 6:39 pm
Location: EIRE

Oil Pipe Fitting's

Post by Evopilot » Mon Aug 20, 2018 10:30 pm

Guys where can i buy these:
Image

Im not even sure what these ends are actually called other then a flange of some kind

I ask as i can get a full custom oil cooler and lines fabricated but my guy needs to find the fittings to make it all connect to the pump,
Top
James1984
3rd Gear
Posts: 309
Joined: Wed Apr 05, 2017 11:14 am

Re: Oil Pipe Fitting's

Post by James1984 » Tue Aug 21, 2018 1:02 am

Cut them off and weld AN fittings on?
2007 B7 RS4 Saloon, Phantom Black, Forge Oil Cooler Kit, custom home made air feed, H&R Coilovers, H&R anti roll bars, 10mm H&R Spacers, Milltek decat downpipes, Milltek Non Res Valved Exhaust, Reyland Motorsports front & rear discs with Hel braided Hoses, full underbody overhauled inc powdercoated subframes and arms, 034 solid subframe bushes and every joint, arm or bush replaced.
Top
Evopilot
Neutral
Posts: 30
Joined: Tue Aug 14, 2018 6:39 pm
Location: EIRE

Re: Oil Pipe Fitting's

Post by Evopilot » Tue Aug 21, 2018 9:50 pm

James1984 wrote: ↑
Tue Aug 21, 2018 1:02 am
 Cut them off and weld AN fittings on?
we never even thought of that :?
Top
James1984
3rd Gear
Posts: 309
Joined: Wed Apr 05, 2017 11:14 am

Re: Oil Pipe Fitting's

Post by James1984 » Tue Aug 21, 2018 11:48 pm

Evopilot wrote: ↑
Tue Aug 21, 2018 9:50 pm
James1984 wrote: ↑
Tue Aug 21, 2018 1:02 am
 Cut them off and weld AN fittings on?
we never even thought of that :?
Might save you some cash
2007 B7 RS4 Saloon, Phantom Black, Forge Oil Cooler Kit, custom home made air feed, H&R Coilovers, H&R anti roll bars, 10mm H&R Spacers, Milltek decat downpipes, Milltek Non Res Valved Exhaust, Reyland Motorsports front & rear discs with Hel braided Hoses, full underbody overhauled inc powdercoated subframes and arms, 034 solid subframe bushes and every joint, arm or bush replaced.
Top
Lukes3
4th Gear
Posts: 657
Joined: Tue Dec 04, 2012 3:56 pm

Re: Oil Pipe Fitting's

Post by Lukes3 » Thu Aug 23, 2018 10:07 pm

I done this in my charger build thread
Attachments
3EBEF2A6-C67E-4C1A-A272-797A9244A98A.jpeg
Current-saloon rs4,Full decat Xpipe miltek,cold air feed,BMC air filter, TTS supercharged, MRC stage 3 L/C F/S,hell s+s brake lines,AP racing rotors + vagbremtechnic bells, kw v3s clifford 650mk2

Gone-audi s3 8p stage2+ with loba lo400 turbo.
Top
Evopilot
Neutral
Posts: 30
Joined: Tue Aug 14, 2018 6:39 pm
Location: EIRE

Re: Oil Pipe Fitting's

Post by Evopilot » Wed Aug 29, 2018 9:13 pm

[/tabela]
Lukes3 wrote: ↑
Thu Aug 23, 2018 10:07 pm
 I done this in my charger build thread
They look the job mate :beerchug:
Top
Post Reply

Return to “RS4 (B7 Typ 8E) 2006–2008”

Who is online

Users browsing this forum: Google Adsense [Bot], r8wut and 151 guests