Standard disc dimensions

4.2 V8 32v Naturally Aspirated - 414 bhp
Post Reply
James1984
3rd Gear
Posts: 309
Joined: Wed Apr 05, 2017 11:14 am

Standard disc dimensions

Post by James1984 » Thu Jul 19, 2018 3:15 pm

Does anyone have a standard rear disk which is new or nearly new that they can confirm the dimensions i have? Im getting some 2 piece discs made up and just want to make sure what i have is correct.
Attachments
1 - STANDARD REAR DISC - Rev 1.pdf
(24.99 KiB) Downloaded 50 times
2007 B7 RS4 Saloon, Phantom Black, Forge Oil Cooler Kit, custom home made air feed, H&R Coilovers, H&R anti roll bars, 10mm H&R Spacers, Milltek decat downpipes, Milltek Non Res Valved Exhaust, Reyland Motorsports front & rear discs with Hel braided Hoses, full underbody overhauled inc powdercoated subframes and arms, 034 solid subframe bushes and every joint, arm or bush replaced.

neil_f
2nd Gear
Posts: 162
Joined: Fri Aug 18, 2017 7:45 am

Re: Standard disc dimensions

Post by neil_f » Thu Jul 19, 2018 8:43 pm

Who's making them for you.....Reyland?

James1984
3rd Gear
Posts: 309
Joined: Wed Apr 05, 2017 11:14 am

Re: Standard disc dimensions

Post by James1984 » Thu Jul 19, 2018 10:48 pm

Yes they are, going to work out the cheapest way to replace all four discs, should work out £950-1000 for all discs
2007 B7 RS4 Saloon, Phantom Black, Forge Oil Cooler Kit, custom home made air feed, H&R Coilovers, H&R anti roll bars, 10mm H&R Spacers, Milltek decat downpipes, Milltek Non Res Valved Exhaust, Reyland Motorsports front & rear discs with Hel braided Hoses, full underbody overhauled inc powdercoated subframes and arms, 034 solid subframe bushes and every joint, arm or bush replaced.

User avatar
RS4JAY
1st Gear
Posts: 74
Joined: Sun May 19, 2013 3:55 am

Re: Standard disc dimensions

Post by RS4JAY » Mon Aug 20, 2018 9:04 pm

That’s not bad. How did you get on ?
Current Toys -

B7 Audi RS4 Avant - Phantom Black
E92 DCT M3 LE500 - Imola Red
Navara NP300 Tekna
E36 BMW M3 Evo track Car - Cosmos Black

James1984
3rd Gear
Posts: 309
Joined: Wed Apr 05, 2017 11:14 am

Re: Standard disc dimensions

Post by James1984 » Tue Aug 21, 2018 1:01 am

Had a bit of a delay with these, instead of going with the drawing i sent they have bought a new rear disc to take the measurements off, all discs are made so just waiting for them to press go on the cnc for the bells and then get the bells anodized, they have said id get them this week.
2007 B7 RS4 Saloon, Phantom Black, Forge Oil Cooler Kit, custom home made air feed, H&R Coilovers, H&R anti roll bars, 10mm H&R Spacers, Milltek decat downpipes, Milltek Non Res Valved Exhaust, Reyland Motorsports front & rear discs with Hel braided Hoses, full underbody overhauled inc powdercoated subframes and arms, 034 solid subframe bushes and every joint, arm or bush replaced.

neil_f
2nd Gear
Posts: 162
Joined: Fri Aug 18, 2017 7:45 am

Re: Standard disc dimensions

Post by neil_f » Sun Aug 26, 2018 10:55 pm

What was the final cost if you don't mind me asking?

James1984
3rd Gear
Posts: 309
Joined: Wed Apr 05, 2017 11:14 am

Re: Standard disc dimensions

Post by James1984 » Sun Aug 26, 2018 11:42 pm

£550 for the rears and £340 front plus £20 postage, the discs and bells were finished on Thursday evening but with the bank holiday wouldn't be with be until this Tuesday, I have asked him to delay postage for a day on top as we are away for a couple of days.
2007 B7 RS4 Saloon, Phantom Black, Forge Oil Cooler Kit, custom home made air feed, H&R Coilovers, H&R anti roll bars, 10mm H&R Spacers, Milltek decat downpipes, Milltek Non Res Valved Exhaust, Reyland Motorsports front & rear discs with Hel braided Hoses, full underbody overhauled inc powdercoated subframes and arms, 034 solid subframe bushes and every joint, arm or bush replaced.

marc1
Cruising
Posts: 3288
Joined: Sun Jan 31, 2010 4:46 pm

Re: Standard disc dimensions

Post by marc1 » Mon Aug 27, 2018 8:05 am

Keep us posted on your thoughts when they’re fitted and been used mate.

James1984
3rd Gear
Posts: 309
Joined: Wed Apr 05, 2017 11:14 am

Re: Standard disc dimensions

Post by James1984 » Mon Aug 27, 2018 10:03 am

Will do, im not expecting them to be any different from stock though due to them being the same size, might have better cooling maybe, a friend of mine has a 400+hp civic with reyland discs and they have held up well.
2007 B7 RS4 Saloon, Phantom Black, Forge Oil Cooler Kit, custom home made air feed, H&R Coilovers, H&R anti roll bars, 10mm H&R Spacers, Milltek decat downpipes, Milltek Non Res Valved Exhaust, Reyland Motorsports front & rear discs with Hel braided Hoses, full underbody overhauled inc powdercoated subframes and arms, 034 solid subframe bushes and every joint, arm or bush replaced.

marc1
Cruising
Posts: 3288
Joined: Sun Jan 31, 2010 4:46 pm

Re: Standard disc dimensions

Post by marc1 » Mon Aug 27, 2018 10:53 am

They don’t do drilled options do they? Did you go for slotted or hooked?

James1984
3rd Gear
Posts: 309
Joined: Wed Apr 05, 2017 11:14 am

Re: Standard disc dimensions

Post by James1984 » Mon Aug 27, 2018 12:47 pm

Thats right they only do slotted in straight curved or hooked, i have gone for hooked
Last edited by James1984 on Mon Aug 27, 2018 3:48 pm, edited 1 time in total.
2007 B7 RS4 Saloon, Phantom Black, Forge Oil Cooler Kit, custom home made air feed, H&R Coilovers, H&R anti roll bars, 10mm H&R Spacers, Milltek decat downpipes, Milltek Non Res Valved Exhaust, Reyland Motorsports front & rear discs with Hel braided Hoses, full underbody overhauled inc powdercoated subframes and arms, 034 solid subframe bushes and every joint, arm or bush replaced.

marc1
Cruising
Posts: 3288
Joined: Sun Jan 31, 2010 4:46 pm

Re: Standard disc dimensions

Post by marc1 » Mon Aug 27, 2018 3:40 pm

:thumbs:

James1984
3rd Gear
Posts: 309
Joined: Wed Apr 05, 2017 11:14 am

Re: Standard disc dimensions

Post by James1984 » Thu Aug 30, 2018 10:49 pm

picked my discs up today and had a quick trial fitting (i arent fitting them until i have got my garage tidied up and can get the car in to paint the calipers etc) all seems good, the discs sit in the same position within the carriers and im pleased with them!
Attachments
97743975-00AB-48D4-8D93-47C3F6362A5F.jpeg
91D81558-6117-42CB-9357-64933BFF4D03.jpeg
EEF0212D-6A6F-479D-BA00-222E437DA5F7.jpeg
52452798-EF56-467E-AE77-AF1BDB7A9F76.jpeg
6C83D218-ED89-4337-A3AA-5E43ECE35795.jpeg
F72353E6-BC9D-45C6-8459-5366A24A24CA.jpeg
25C73D08-5AA7-4761-BE7C-B4D12B2BC6AE.jpeg
2007 B7 RS4 Saloon, Phantom Black, Forge Oil Cooler Kit, custom home made air feed, H&R Coilovers, H&R anti roll bars, 10mm H&R Spacers, Milltek decat downpipes, Milltek Non Res Valved Exhaust, Reyland Motorsports front & rear discs with Hel braided Hoses, full underbody overhauled inc powdercoated subframes and arms, 034 solid subframe bushes and every joint, arm or bush replaced.

marc1
Cruising
Posts: 3288
Joined: Sun Jan 31, 2010 4:46 pm

Re: Standard disc dimensions

Post by marc1 » Fri Aug 31, 2018 8:30 am

They looks great. Look forward to seeing them with the painted Calipers and fronts done and hearing how they perform and hold up over time.

Post Reply

Return to “RS4 (B7 Typ 8E) 2006–2008”

Who is online

Users browsing this forum: MTBear and 395 guests