DRC removal

4.2 V8 32v Naturally Aspirated - 414 bhp
Post Reply
mullyace
Neutral
Posts: 4
Joined: Mon Dec 04, 2017 6:30 pm

DRC removal

Post by mullyace » Sun Apr 01, 2018 7:49 pm

Evening all,

Is there a guide anywhere for how to completely remove the DRC suspension. My main concern is how to depressurise the system.

Thanks

User avatar
pule333
5th Gear
Posts: 1408
Joined: Sat Jan 19, 2013 5:56 pm

Re: DRC removal

Post by pule333 » Mon Apr 02, 2018 10:21 am

mullyace wrote:Evening all,

Is there a guide anywhere for how to completely remove the DRC suspension. My main concern is how to depressurise the system.

Thanks
Take a big rag and a small screwdriver, locate the filling nipple on the front struts, wrap around with a rag and press the nipple with a screwdriver.
Repeat on another side. (Depending how damaged you system is, there might not actualy be that much pressure)

Removing everything is just a matter of unscrewing protection underneath and rip it all out. For the rear, you can chop pipes in to smaller bits to make it easier so you don’t have to drop rear.
Install you new suspension of your choice.


Sent from my iPhone using Tapatalk
ilya, photographer http://www.ikrylov.com

RS4 B7 aka Vinnie
AMD stage2|De-coked|GruppeM|CAF|Eibach arbs|BilsteinB14|Goodridge hoses|DS3000|phaeton brake ducts|Led tail lights|Trups DTRL|LED interior|JcWeldFab|034 motorsport endlinks, mounts and bushings|ECS Differential Mount|JHM short shift|JHM intake spacers|8/10mm H&R|R2D2 10" sub and AMP|Corbeau seats|4point harness

mullyace
Neutral
Posts: 4
Joined: Mon Dec 04, 2017 6:30 pm

Re: DRC removal

Post by mullyace » Mon Apr 02, 2018 5:14 pm

Perfect, thanks for the info

Post Reply

Return to “RS4 (B7 Typ 8E) 2006–2008”

Who is online

Users browsing this forum: JamesBaby and 94 guests