EASY COMPOSITIES CARBON DIY PICS

4.2 V8 32v Naturally Aspirated - 414 bhp
Post Reply
User avatar
Neilb76
2nd Gear
Posts: 209
Joined: Wed Jul 12, 2017 8:13 pm

EASY COMPOSITIES CARBON DIY PICS

Post by Neilb76 » Fri Jan 26, 2018 8:03 pm

Have been wanting to.domthe pillars for a while now so bougt some soare to mess with and biught the kit from easy composities. Have to say so far it is going well have 1 more coat of resin to apply. Then a sand and polish.. so far inhabe managed to do this.
20180126_162258.jpg
20180124_144329.jpg
20180126_173148.jpg
Attachments
20180126_173148.jpg
20180126_185608.jpg
Stage 2 mrc, Pre cats removed, Milltek Resonated, Bilstein B14 Coilovers, MRC De carbon, Deflapped MRC, RR 434BHP, Pandora alarm system, 8mm Rear spacers
Cold air feed, Refurbed caliper colour change, Carbon piller, Carbon dash ends

User avatar
Jon_J
5th Gear
Posts: 1383
Joined: Sat Feb 04, 2017 12:20 am

Re: EASY COMPOSITIES CARBON DIY PICS

Post by Jon_J » Fri Jan 26, 2018 10:26 pm

I like it.


Sent from my iPhone using Tapatalk
RS4 B7 Sprint Blue
- Titanium Pack
- Black Optics
- B16's
- RNSE2 with AMI
- Reverse Camera
- Full Stereo install

S5 8T Cab White
S4 B7 Phantom Black (gone but not forgotten)
A4 B7 Avant 2.7 TDI Brilliant Red
A5 Cab 3.0 TDI Phantom Black

User avatar
Neilb76
2nd Gear
Posts: 209
Joined: Wed Jul 12, 2017 8:13 pm

Re: EASY COMPOSITIES CARBON DIY PICS

Post by Neilb76 » Fri Jan 26, 2018 10:34 pm

Juat applied the last of the 3 coats. Need to lwav it over night now. Then sand and another thin coat. Sand and polish should be done for sunday..

Might do the ones on the car while i have a spare pair now
20180126_213033.jpg
20180126_213042.jpg
Stage 2 mrc, Pre cats removed, Milltek Resonated, Bilstein B14 Coilovers, MRC De carbon, Deflapped MRC, RR 434BHP, Pandora alarm system, 8mm Rear spacers
Cold air feed, Refurbed caliper colour change, Carbon piller, Carbon dash ends

User avatar
Jon_J
5th Gear
Posts: 1383
Joined: Sat Feb 04, 2017 12:20 am

Re: EASY COMPOSITIES CARBON DIY PICS

Post by Jon_J » Fri Jan 26, 2018 11:42 pm

Look good. Nice one


Sent from my iPhone using Tapatalk
RS4 B7 Sprint Blue
- Titanium Pack
- Black Optics
- B16's
- RNSE2 with AMI
- Reverse Camera
- Full Stereo install

S5 8T Cab White
S4 B7 Phantom Black (gone but not forgotten)
A4 B7 Avant 2.7 TDI Brilliant Red
A5 Cab 3.0 TDI Phantom Black

User avatar
dhali
4th Gear
Posts: 867
Joined: Sat Oct 02, 2004 7:44 pm

Re: EASY COMPOSITIES CARBON DIY PICS

Post by dhali » Sat Jan 27, 2018 7:54 pm

Those have come out really well. More info on the kit plse .

User avatar
Neilb76
2nd Gear
Posts: 209
Joined: Wed Jul 12, 2017 8:13 pm

Re: EASY COMPOSITIES CARBON DIY PICS

Post by Neilb76 » Sat Jan 27, 2018 11:29 pm

IMG_20180127_170859_170.jpg
Did the final coat tonight you can see the sanded side and epoxy going on. One more fine sand and polish and done. From the shine without more work i am very happy. I will prob do the spare set i have and sell them.

I will also do the rear smaller triangle trim near the rear windows as i have stuff left over to do..
Stage 2 mrc, Pre cats removed, Milltek Resonated, Bilstein B14 Coilovers, MRC De carbon, Deflapped MRC, RR 434BHP, Pandora alarm system, 8mm Rear spacers
Cold air feed, Refurbed caliper colour change, Carbon piller, Carbon dash ends

whitean3
Neutral
Posts: 6
Joined: Wed Sep 30, 2015 8:51 pm

Re: EASY COMPOSITIES CARBON DIY PICS

Post by whitean3 » Thu Feb 15, 2018 2:10 pm

That's really interesting, and they look great! I'm wanting to do the same with my front numberplate holder in carbon (as I have a nice small (Swiss) plate that sits behind the grey plastic... haven't quite summoned up the courage to locate a spare part and have a go myself!

Post Reply

Return to “RS4 (B7 Typ 8E) 2006–2008”

Who is online

Users browsing this forum: No registered users and 558 guests