Exhaust flap mod.

4.2 V8 32v Naturally Aspirated - 414 bhp
Post Reply
Lukes3
4th Gear
Posts: 657
Joined: Tue Dec 04, 2012 3:56 pm

Exhaust flap mod.

Post by Lukes3 » Wed Jan 20, 2016 8:59 pm

Alright lads.
Is there anyway of keeping these flaps open all the time in s mode? I know you can remove the vak lines to keep them open but i like that i can shut it up abit when coming home late,

So i was woundering if i could wire in or change the vak lines some how so once in s mode the flaps open an stay open continuously untill i turn it off.
Cheers
Current-saloon rs4,Full decat Xpipe miltek,cold air feed,BMC air filter, TTS supercharged, MRC stage 3 L/C F/S,hell s+s brake lines,AP racing rotors + vagbremtechnic bells, kw v3s clifford 650mk2

Gone-audi s3 8p stage2+ with loba lo400 turbo.

User avatar
MikeFish
Cruising
Posts: 15588
Joined: Tue Aug 31, 2010 9:23 pm
Location: The Middle of Somewhere

Re: Exhaust flap mod.

Post by MikeFish » Wed Jan 20, 2016 9:16 pm

Sort of, you could wire a switch to activate the flaps independantly of the sport button. This means you could have them alwyas closed or always opened. If you make it a 3 way switch you can add a 3rd mode which makes it operate as normal. This has been discussed before on here.
There is a french company that makes a remote controlled device but when I spoke to the company it didn't work exactly how I wanted it to so didn't go through with it (can;t recall the details but it is on here soehwere and was pretty much plug and play I think).

Lukes3
4th Gear
Posts: 657
Joined: Tue Dec 04, 2012 3:56 pm

Re: Exhaust flap mod.

Post by Lukes3 » Wed Jan 20, 2016 9:30 pm

Cheers mike.
Ill look it up. That 3way swich sounds good to me.
Current-saloon rs4,Full decat Xpipe miltek,cold air feed,BMC air filter, TTS supercharged, MRC stage 3 L/C F/S,hell s+s brake lines,AP racing rotors + vagbremtechnic bells, kw v3s clifford 650mk2

Gone-audi s3 8p stage2+ with loba lo400 turbo.

Lukes3
4th Gear
Posts: 657
Joined: Tue Dec 04, 2012 3:56 pm

Re: Exhaust flap mod.

Post by Lukes3 » Wed Jan 20, 2016 9:45 pm

http://aussiedan.com/blog/2015/03/29/rs ... p-control/

Just found this for anyone else interested.
Current-saloon rs4,Full decat Xpipe miltek,cold air feed,BMC air filter, TTS supercharged, MRC stage 3 L/C F/S,hell s+s brake lines,AP racing rotors + vagbremtechnic bells, kw v3s clifford 650mk2

Gone-audi s3 8p stage2+ with loba lo400 turbo.

User avatar
MikeFish
Cruising
Posts: 15588
Joined: Tue Aug 31, 2010 9:23 pm
Location: The Middle of Somewhere

Re: Exhaust flap mod.

Post by MikeFish » Wed Jan 20, 2016 9:54 pm


ians63
2nd Gear
Posts: 124
Joined: Mon Mar 09, 2015 3:44 pm

Re: Exhaust flap mod.

Post by ians63 » Wed Jan 20, 2016 10:11 pm

When I bought my car somebody had done a good old mechy engineers mod - drilled a small hole through the the bottom under the valve flaps, 3mm diameter or so, tapped them then screwed in 2 bolts about 50mm long to hold the flaps open. I took the bolts out and the valves were (and still are) sized open. No vac or scary electrical mods - simples!

Lukes3
4th Gear
Posts: 657
Joined: Tue Dec 04, 2012 3:56 pm

Re: Exhaust flap mod.

Post by Lukes3 » Wed Jan 20, 2016 10:18 pm

Cheers mike great help.

Ians63 i could just pull the vak lines off but i like to have the option of making it not so loud it i want to.
Current-saloon rs4,Full decat Xpipe miltek,cold air feed,BMC air filter, TTS supercharged, MRC stage 3 L/C F/S,hell s+s brake lines,AP racing rotors + vagbremtechnic bells, kw v3s clifford 650mk2

Gone-audi s3 8p stage2+ with loba lo400 turbo.

User avatar
PetrolDave
Cruising
Posts: 7599
Joined: Mon Nov 07, 2005 11:28 am
Location: Southampton, Hampshire UK

Re: Exhaust flap mod.

Post by PetrolDave » Thu Jan 21, 2016 7:13 pm

Lukes3 wrote:i could just pull the vak lines off but i like to have the option of making it not so loud it i want to.
If you pull the vac lines off then you MUST plug them - as the vac controls flaps (intake and airbox) on the engine and without the vac you'll lose maybe as much as 60bhp because of that.
Gone: 2006 B7 RS4 Avant (Phantom Black)

User avatar
JohnFC
Neutral
Posts: 10
Joined: Sun Aug 25, 2013 8:37 pm
Location: Newbury, Berkshire.

Re: Exhaust flap mod.

Post by JohnFC » Fri Jan 22, 2016 4:31 pm

I've removed the vac lines and plugged them with golf tees ... works perfectly, using a couple of fuel line clamps to be completely sure. With light throttle I don't think the noise is any louder than with the valves closed ... I think it's worth trying this simple 10-minute solution before rewiring.
2006 RS4 Cabriolet, Misano Red
2012 A7 SE quattro 245, Impala Beige

Lukes3
4th Gear
Posts: 657
Joined: Tue Dec 04, 2012 3:56 pm

Re: Exhaust flap mod.

Post by Lukes3 » Fri Jan 22, 2016 7:52 pm

Yes think i will try this before going mad on the wiring.
Current-saloon rs4,Full decat Xpipe miltek,cold air feed,BMC air filter, TTS supercharged, MRC stage 3 L/C F/S,hell s+s brake lines,AP racing rotors + vagbremtechnic bells, kw v3s clifford 650mk2

Gone-audi s3 8p stage2+ with loba lo400 turbo.

Post Reply

Return to “RS4 (B7 Typ 8E) 2006–2008”

Who is online

Users browsing this forum: Google [Bot] and 308 guests