Evening all.
Looking to get two little dings removed from the car. One on the drivers door & second one on the passenger rear door. Has anyone had any experiences with this process in the Aberdeenshire area? Good or bad experiences welcome / cost / drop your car off or was it a home service where they meet you at home or place of work to carry out the repair.
Thanks for your time gang.
Paintless Dent Repair. Aberdeenshire
-
- Neutral
- Posts: 47
- Joined: Thu Nov 15, 2012 11:40 pm
- Location: Aberdeenshire
Paintless Dent Repair. Aberdeenshire
Some beautiful paths can't be discovered without getting lost.
Re: Paintless Dent Repair. Aberdeenshire
There's a guy who does the rounds, and he visits Morrison Motors in Turriff on a Thursday. He massages the dinks out from inside the panel and usually you cannot see the repair. The quality of the repair will depend on whether he can get behind the panel and whether the paint has cracked.
The work I have had done is first class.
The work I have had done is first class.
Re: Paintless Dent Repair. Aberdeenshire
We tried dents away on the Porsche. It's amazing what they could do.
-
- 3rd Gear
- Posts: 351
- Joined: Tue Jul 02, 2013 8:32 pm
- Location: Aberdeenshire
Re: Paintless Dent Repair. Aberdeenshire
I used dent devils, the guy is based in Dundee but comes to you, they have a website and you send them pictures of the dents and they will let you know if it can be pushed out or not
RS4 B7 Saloon Milltek Cat back, CAF with piper cross panel, Wrapped optics black, Satin black wheels, TRUPS LED front DRL's & sides, goodridge braided hoses, H&R 10/15mm spares front/rear
Bilstien B16 coilovers with H&R anti roll bars
MRC stage 2 deflapped, precat gutted 439ps 481nm torque
1/4 mile time 12.884sec
My clutch replacement write up can be found here viewtopic.php?f=35&t=116929&start=15
Bilstien B16 coilovers with H&R anti roll bars
MRC stage 2 deflapped, precat gutted 439ps 481nm torque
1/4 mile time 12.884sec
My clutch replacement write up can be found here viewtopic.php?f=35&t=116929&start=15
Who is online
Users browsing this forum: No registered users and 81 guests