RS246.com Forum :: The World's #1 Audi R, S and RS Enthusiast Community

Need some help... The following VAG code came up... I purchased the part... and using my Bentley CD... can't for the life of me find where this is...

I have found described as being located "valve is positioned near the airbox and controls the vacuum that regulates a small flap in airbox"

I am going crazy.... please help me find this in the Bentley docs... i think it is a difference in part naming.

Thanks

The intake manifold flap position sensors are mounted on the ends of the intake manifold not the air box, the air box does not have banks

Bank 2 is the passenger side in the UK I believe

That's right it's the passenger side manifold flap position sensor. It's a manifold off job for that one iF I remember correctly, as it's mounted at the rear of the manifold. The drivers side bank 1 is at the front and is accessible without removing the manifold.

RS6BRIT wrote:That's right it's the passenger side manifold flap position sensor. It's a manifold off job for that one iF I remember correctly, as it's mounted at the rear of the manifold. The drivers side bank 1 is at the front and is accessible without removing the manifold.

Although even that one is a right pita to get at. But is possible... just.

If you need to see what your trying to remove (your doing it yourself) I can send you a photo of the manifold upside down, (spare manifold) this will help finding the fixings,

I can also let you know what tools you will need?