GiroDisc Vs JHM 380mm discs

4.2 V8 32v Naturally Aspirated - 414 bhp
Rick_RS4
Cruising
Posts: 2882
Joined: Mon Dec 13, 2010 4:37 pm

Re: GiroDisc Vs JHM 380mm discs

Post by Rick_RS4 » Sun Oct 18, 2015 9:27 pm

thanks for the info, i want a company that will do fronts and rears that match, ill drop them a message

Badman
2nd Gear
Posts: 115
Joined: Mon Sep 19, 2016 12:11 am

Re: GiroDisc Vs JHM 380mm discs

Post by Badman » Mon Apr 16, 2018 4:31 pm

just reviving this thread.

Anyone using Girodiscs?

James1984
3rd Gear
Posts: 309
Joined: Wed Apr 05, 2017 11:14 am

Re: GiroDisc Vs JHM 380mm discs

Post by James1984 » Mon Apr 16, 2018 8:01 pm

Rb racing rotors do them with new bells for £799 free postage with a choice of drilled, slotted, curved slot or j hook
2007 B7 RS4 Saloon, Phantom Black, Forge Oil Cooler Kit, custom home made air feed, H&R Coilovers, H&R anti roll bars, 10mm H&R Spacers, Milltek decat downpipes, Milltek Non Res Valved Exhaust, Reyland Motorsports front & rear discs with Hel braided Hoses, full underbody overhauled inc powdercoated subframes and arms, 034 solid subframe bushes and every joint, arm or bush replaced.

iconic78
3rd Gear
Posts: 459
Joined: Mon Nov 07, 2016 5:55 am

Re: GiroDisc Vs JHM 380mm discs

Post by iconic78 » Wed May 02, 2018 6:46 pm

James1984 wrote:Rb racing rotors do them with new bells for £799 free postage with a choice of drilled, slotted, curved slot or j hook
From eBay? These are Chinese copies of Brembo.


Sent from my iPhone using Tapatalk

iconic78
3rd Gear
Posts: 459
Joined: Mon Nov 07, 2016 5:55 am

Re: GiroDisc Vs JHM 380mm discs

Post by iconic78 » Wed May 02, 2018 6:46 pm

Badman wrote:just reviving this thread.

Anyone using Girodiscs?
No but im running JHM 380 fronts. No issues.


Sent from my iPhone using Tapatalk

James1984
3rd Gear
Posts: 309
Joined: Wed Apr 05, 2017 11:14 am

Re: GiroDisc Vs JHM 380mm discs

Post by James1984 » Wed May 02, 2018 9:50 pm

iconic78 wrote:
Wed May 02, 2018 6:46 pm
James1984 wrote:Rb racing rotors do them with new bells for £799 free postage with a choice of drilled, slotted, curved slot or j hook
From eBay? These are Chinese copies of Brembo.


Sent from my iPhone using Tapatalk
They have a website too, where did you find they are Chinese copies? Im looking at a few options to rwplace mine so do t want any rubbish.
2007 B7 RS4 Saloon, Phantom Black, Forge Oil Cooler Kit, custom home made air feed, H&R Coilovers, H&R anti roll bars, 10mm H&R Spacers, Milltek decat downpipes, Milltek Non Res Valved Exhaust, Reyland Motorsports front & rear discs with Hel braided Hoses, full underbody overhauled inc powdercoated subframes and arms, 034 solid subframe bushes and every joint, arm or bush replaced.

iconic78
3rd Gear
Posts: 459
Joined: Mon Nov 07, 2016 5:55 am

Re: GiroDisc Vs JHM 380mm discs

Post by iconic78 » Thu May 03, 2018 3:52 pm

James1984 wrote:
iconic78 wrote:
Wed May 02, 2018 6:46 pm
James1984 wrote:Rb racing rotors do them with new bells for £799 free postage with a choice of drilled, slotted, curved slot or j hook
From eBay? These are Chinese copies of Brembo.


Sent from my iPhone using Tapatalk
They have a website too, where did you find they are Chinese copies? Im looking at a few options to rwplace mine so do t want any rubbish.

I got into a discussion with the guy running RB as I was looking for a custom Brembo GT setup. And he said so. I’ll dig out the conversation from my eBay.


Sent from my iPhone using Tapatalk

iconic78
3rd Gear
Posts: 459
Joined: Mon Nov 07, 2016 5:55 am

Re: GiroDisc Vs JHM 380mm discs

Post by iconic78 » Thu May 03, 2018 4:03 pm

You requested more information about our 6 piston and 4 piston GT brake kits for your Audi RS4.
We make the kits to exact Brembo GT spec, they are custom made by us in the uk to the highest quality.
We use Brembo GT calipers off my own personal vehicle to make our calipers. We stripped them and made a computer mould for them and they are exact. They have the same weight, dimensions, use the same brake pad options and have corrosion resistant stainless
steel pistons, so they will perform at their finiest everytime and never run the risk of a pistons corroding like normal steel pistons. Also they are much lughter in weight and improve braking. For the RS4 we would offer floating setup for the front in 405mm
and 380mm for rear, that will use the factory handbrake mechanism exactly the same as your oem audi rear discs.


We can offer the calipers in Black, Yellow or Red finish, or if you prefer a custom colour we can
also offer this but will involve an extra charge of 50 GBP per pair.


Our disc finishes are GT Drilled, Curve Groove or J Hook finish..

Jamie
RB Racing Rotors


Sent from my iPhone using Tapatalk

James1984
3rd Gear
Posts: 309
Joined: Wed Apr 05, 2017 11:14 am

Re: GiroDisc Vs JHM 380mm discs

Post by James1984 » Thu May 03, 2018 6:50 pm

iconic78 wrote:
Thu May 03, 2018 4:03 pm
You requested more information about our 6 piston and 4 piston GT brake kits for your Audi RS4.
We make the kits to exact Brembo GT spec, they are custom made by us in the uk to the highest quality.
We use Brembo GT calipers off my own personal vehicle to make our calipers. We stripped them and made a computer mould for them and they are exact. They have the same weight, dimensions, use the same brake pad options and have corrosion resistant stainless
steel pistons, so they will perform at their finiest everytime and never run the risk of a pistons corroding like normal steel pistons. Also they are much lughter in weight and improve braking. For the RS4 we would offer floating setup for the front in 405mm
and 380mm for rear, that will use the factory handbrake mechanism exactly the same as your oem audi rear discs.


We can offer the calipers in Black, Yellow or Red finish, or if you prefer a custom colour we can
also offer this but will involve an extra charge of 50 GBP per pair.


Our disc finishes are GT Drilled, Curve Groove or J Hook finish..

Jamie
RB Racing Rotors


Sent from my iPhone using Tapatalk
Wow 😮 as if they ripped the whole caliper off, think i will go with reyland
2007 B7 RS4 Saloon, Phantom Black, Forge Oil Cooler Kit, custom home made air feed, H&R Coilovers, H&R anti roll bars, 10mm H&R Spacers, Milltek decat downpipes, Milltek Non Res Valved Exhaust, Reyland Motorsports front & rear discs with Hel braided Hoses, full underbody overhauled inc powdercoated subframes and arms, 034 solid subframe bushes and every joint, arm or bush replaced.

iconic78
3rd Gear
Posts: 459
Joined: Mon Nov 07, 2016 5:55 am

Re: GiroDisc Vs JHM 380mm discs

Post by iconic78 » Thu May 03, 2018 10:53 pm

Buy cheap buy twice. The rear brakes have drums on the inside of the discs!!!


Sent from my iPhone using Tapatalk

maars
3rd Gear
Posts: 394
Joined: Tue Oct 02, 2012 11:59 pm

Re: GiroDisc Vs JHM 380mm discs

Post by maars » Fri May 04, 2018 3:48 pm

They offer 380 and 405mm front disc kits which use the standard calipers. Could be an option?
Daytona RS4 Avant - black optics/decat downpipes/H-pipe/KW springs - featured on the 2012 Audi stand at the Goodwood FoS

iconic78
3rd Gear
Posts: 459
Joined: Mon Nov 07, 2016 5:55 am

Re: GiroDisc Vs JHM 380mm discs

Post by iconic78 » Fri May 04, 2018 5:12 pm

maars wrote:They offer 380 and 405mm front disc kits which use the standard calipers. Could be an option?
Who does?


Sent from my iPhone using Tapatalk

maars
3rd Gear
Posts: 394
Joined: Tue Oct 02, 2012 11:59 pm

Re: GiroDisc Vs JHM 380mm discs

Post by maars » Fri May 04, 2018 11:15 pm

RB Racing Rotors
Daytona RS4 Avant - black optics/decat downpipes/H-pipe/KW springs - featured on the 2012 Audi stand at the Goodwood FoS

iconic78
3rd Gear
Posts: 459
Joined: Mon Nov 07, 2016 5:55 am

Re: GiroDisc Vs JHM 380mm discs

Post by iconic78 » Sat May 05, 2018 8:19 am

Same Chinese junk


Sent from my iPhone using Tapatalk

Post Reply

Return to “RS4 (B7 Typ 8E) 2006–2008”

Who is online

Users browsing this forum: No registered users and 582 guests