Will these wheels fit my rs4 b7?

Post by **denboy1** » Wed Jul 30, 2014 1:02 pm

http://www.ebay.co.uk/itm/331273391265? ... EBIDX%3AIT Any help appreciated.

Post by **brent007** » Wed Jul 30, 2014 2:10 pm

Hi mate,

Yes i believe they will, but you may need spacers.

Im sure someone will be along soon just to clarify this.

I think the et for the rs4 is 20-30.

Regards

Brent

Post by **denboy1** » Wed Jul 30, 2014 2:13 pm

I have 10mm spacers on the back, but the chap who's selling, wont give me the centre bore size.

Post by **N11LS_J** » Wed Jul 30, 2014 2:17 pm

Yes the will fit, and as mentioned on SRS you will require PCD rings from 66.6 to 57.1

As they are 9x19 (same as OEM), I would stick with the 255 tyre and get as close to et21 for the front and et19 for rears with the relevant sized spacers.

Eg, 12mm spacers for front and 15mm spacer for rears

You'll have no issues with the above setup

Post by **MartayMcFly** » Wed Jul 30, 2014 4:27 pm

N11LS_J wrote:Yes the will fit, and as mentioned on SRS you will require PCD rings from 66.6 to 57.1

Spigot rings to fill the gap between your hub's bore and the centre bore of the wheels, nothing to do with the pcd.

Post by **N11LS_J** » Wed Jul 30, 2014 5:38 pm

Yep sorry meant spigot ring!

Post by **RS6chris!** » Wed Jul 30, 2014 6:20 pm

Need 20's FTW.

Post by **MikeFish** » Wed Jul 30, 2014 7:11 pm

RS6chris! wrote:Need 20's FTW.

+1

Post by **denboy1** » Wed Jul 30, 2014 10:03 pm

Well I can't get 19's, how hard are 20's going to be?

Post by **Rick_RS4** » Wed Jul 30, 2014 10:34 pm

denboy1 wrote:Well I can't get 19's, how hard are 20's going to be?

why not?

20s will be 1700 for rims alone i would say

Post by **denboy1** » Thu Jul 31, 2014 8:20 am

Rick_RS4 wrote:
denboy1 wrote:Well I can't get 19's, how hard are 20's going to be?
why not?

20s will be 1700 for rims alone i would say

Looked everywhere for them, ebay, traders, gumtree, preloved etc, etc. None with the right o/set, width, et.

Post by **Rick_RS4** » Thu Jul 31, 2014 12:47 pm

Those you posted are fine. Just stick some 10 mm spacers on. Standard offset is 29 they are 33 so only 4 mm in more.

10 all round will be fine.

Hurry 30 mins left

Post by **denboy1** » Thu Jul 31, 2014 2:58 pm

Rick_RS4 wrote:Those you posted are fine. Just stick some 10 mm spacers on. Standard offset is 29 they are 33 so only 4 mm in more.

10 all round will be fine.

Hurry 30 mins left

Didn't bother in the end, seller was a bit vague about some of the questions I asked him.

RS246.com Forum :: The World's #1 Audi R, S and RS Enthusiast Community

Will these wheels fit my rs4 b7?

Will these wheels fit my rs4 b7?

Re: Will these wheels fit my rs4 b7?

Re: Will these wheels fit my rs4 b7?

Re: Will these wheels fit my rs4 b7?

Re: Will these wheels fit my rs4 b7?

Re: Will these wheels fit my rs4 b7?

Re: Will these wheels fit my rs4 b7?

Re: Will these wheels fit my rs4 b7?

Re: Will these wheels fit my rs4 b7?

Re: Will these wheels fit my rs4 b7?

Re: Will these wheels fit my rs4 b7?

Re: Will these wheels fit my rs4 b7?

Re: Will these wheels fit my rs4 b7?

Who is online