ohlins porn

4.2 V8 32v Naturally Aspirated - 414 bhp
Post Reply
User avatar
sar
4th Gear
Posts: 768
Joined: Wed Mar 29, 2006 2:14 pm
Location: northeast uk

ohlins porn

Post by sar » Mon Jun 30, 2014 11:22 pm

well my drc bit the dust for the third time, this time due to rotten pipes. the shockers were fine no misting or leaks but ive had enough and decided to ditch the drc and upgrade to coilovers.
i was originally going to be sensible and get the kwv3's but i just couldn't resist the lure of the psi ttx36 ohlins :bowdown:

big thanks to dan at 034motorsports for sorting these out for me.
IMG_20140609_163255.jpg
almost to pretty to put on the car!
IMG_20140610_141824.jpg
IMG_20140610_141013.jpg
my car was off the road for about a month while i waited for these to be made shipped and fitted, so to say i was eager to get in the drivers seat was an understatement!.
first impressions are they are sublime! they give up nothing in ride quality and comfort over my previous ss+ set up yet the car feels much more settled and planted. they are every bit as good as i hoped they would be. :mrgreen:

what ride height are people with coilovers running on here?, for the moment i have left it on 25.5 inch ground to wheel arch all round looks ok and handles speed bumps fine.
b7rs4 phantom black, titan pack.

Rick_RS4
Cruising
Posts: 2882
Joined: Mon Dec 13, 2010 4:37 pm

Re: ohlins porn

Post by Rick_RS4 » Mon Jun 30, 2014 11:56 pm

Sexy kit

User avatar
MikeFish
Cruising
Posts: 15588
Joined: Tue Aug 31, 2010 9:23 pm
Location: The Middle of Somewhere

Re: ohlins porn

Post by MikeFish » Tue Jul 01, 2014 12:32 am

Nice one sar. Photos on the car please!

What you gonna do about servicing? You sending them back to the US or not gonna bother?

I see these as the ultimate B7 set - up but put off by high price in the UK and no UK servicing.

User avatar
stas_magic
Neutral
Posts: 20
Joined: Sun Mar 08, 2009 12:53 pm
Location: Kiev, UA
Contact:

Re: ohlins porn

Post by stas_magic » Tue Jul 01, 2014 10:08 am

So rear springs are fitted on coilovers, not separately as for stock/KW v3 setup?
Or this one are used? http://performanceshock.com/index.php?m ... ts_id=1283
Cleaned, ported, cold air intake, full non-res 100 cell Miltek, MRC St2 = 444PS&482Nm)
KW V3 - Hotchkis ARBs - Ceramic

User avatar
SuprSi
5th Gear
Posts: 1416
Joined: Mon Mar 17, 2014 12:10 pm
Location: Southampton

Re: ohlins porn

Post by SuprSi » Tue Jul 01, 2014 10:16 am

Very nice!! Definitely NSFW!

Out of morbid curiosity how much roughly are we talking for a kit like this?
2003 C5 RS6 Avant Daytona Grey

User avatar
sar
4th Gear
Posts: 768
Joined: Wed Mar 29, 2006 2:14 pm
Location: northeast uk

Re: ohlins porn

Post by sar » Tue Jul 01, 2014 10:32 am

MikeFish wrote:Nice one sar. Photos on the car please!

What you gonna do about servicing? You sending them back to the US or not gonna bother?

I see these as the ultimate B7 set - up but put off by high price in the UK and no UK servicing.
ill get some pics taken, not had time yet.
as for servicing you can get them done in the uk at any ohlins dealer, performance shock recommend every 30,000km for regular street use. on the old stasis ohlins set up it was recomended to service every 20,000km but plenty of people have ran them a lot longer than that with no problems. the ttx 36 damper performance shock use is meant to be more robust than the one stasis used to use so hopefully i wont be rebuilding for quite some time.
b7rs4 phantom black, titan pack.

User avatar
sar
4th Gear
Posts: 768
Joined: Wed Mar 29, 2006 2:14 pm
Location: northeast uk

Re: ohlins porn

Post by sar » Tue Jul 01, 2014 10:37 am

stas_magic wrote:So rear springs are fitted on coilovers, not separately as for stock/KW v3 setup?
Or this one are used? http://performanceshock.com/index.php?m ... ts_id=1283
no the rear springs are separate like stock, its the same set up in the link.
heres a pic, they are a piece of cake to adjust ride hight.
IMG_20140620_184647[1].jpg
b7rs4 phantom black, titan pack.

User avatar
stas_magic
Neutral
Posts: 20
Joined: Sun Mar 08, 2009 12:53 pm
Location: Kiev, UA
Contact:

Re: ohlins porn

Post by stas_magic » Tue Jul 01, 2014 12:23 pm

So this box kit includes all parts for install?
http://performanceshock.com/index.php?m ... ts_id=1324

Can you post pics fitted? If possible.
Cleaned, ported, cold air intake, full non-res 100 cell Miltek, MRC St2 = 444PS&482Nm)
KW V3 - Hotchkis ARBs - Ceramic

User avatar
edge
5th Gear
Posts: 1165
Joined: Tue Jul 06, 2010 3:17 pm
Location: Ireland

Re: ohlins porn

Post by edge » Tue Jul 01, 2014 12:27 pm

look so good, yeah you need to keep them clean, dont put them on the car :)

User avatar
sar
4th Gear
Posts: 768
Joined: Wed Mar 29, 2006 2:14 pm
Location: northeast uk

Re: ohlins porn

Post by sar » Tue Jul 01, 2014 1:07 pm

stas_magic wrote:So this box kit includes all parts for install?
http://performanceshock.com/index.php?m ... ts_id=1324

Can you post pics fitted? If possible.
that link is for the 3-way adjustable kit, mine are just the 2-way. i can have them upgraded here in the uk to 3-way for £150 a shock or 4-way for £300 a shock.
but yes everything needed for install is included in the kit.
the only extra i bought was new 034motorsport density line strut top mount rubbers.

the wet on the pics is where i have sprayed them with a good coating of boeshield t-9, the boeshild seemed popular with people in the states for protecting the shocks against general road nasty.
IMG_20140611_181420.jpg
IMG_20140620_184628.jpg
IMG_20140620_184638.jpg
b7rs4 phantom black, titan pack.

User avatar
stas_magic
Neutral
Posts: 20
Joined: Sun Mar 08, 2009 12:53 pm
Location: Kiev, UA
Contact:

Re: ohlins porn

Post by stas_magic » Tue Jul 01, 2014 1:25 pm

Thanks! :beerchug:
Cleaned, ported, cold air intake, full non-res 100 cell Miltek, MRC St2 = 444PS&482Nm)
KW V3 - Hotchkis ARBs - Ceramic

User avatar
flying_tomatoes
2nd Gear
Posts: 110
Joined: Wed Jun 11, 2014 12:34 pm
Location: East Coast USA

Re: ohlins porn

Post by flying_tomatoes » Tue Jul 01, 2014 8:43 pm

Looks fantastic! Love my ohlins, I think you will be very happy
2007 RS4 - Bagged and Blown. IG: @Flying_Tomatoes

User avatar
sar
4th Gear
Posts: 768
Joined: Wed Mar 29, 2006 2:14 pm
Location: northeast uk

Re: ohlins porn

Post by sar » Wed Jul 02, 2014 10:47 am

took a couple of quick pics yesterday, this is at 25.5 inch floor to arch center all round.
what heights are people at?.
IMG_20140701_163440.jpg
IMG_20140701_163500.jpg
IMG_20140701_163515.jpg
IMG_20140701_163706.jpg
IMG_20140701_163725.jpg
b7rs4 phantom black, titan pack.

adsgreen
Cruising
Posts: 5571
Joined: Mon Aug 16, 2010 9:54 am

Re: ohlins porn

Post by adsgreen » Wed Jul 02, 2014 11:25 am

Worth checking the floor to ground measurement too - I always find it best to have a small amount of front rake
(best to put some ballast in the front seats too when checking).
It (mighty) looks fine from the pictures though.

I have always gone Ohlins when fitting after market suspension. Simply stunning.
If you do decide on it, the 4 way kits are incredible (no experience on the RS4 sadly)

leadfoot
1st Gear
Posts: 94
Joined: Mon Oct 10, 2011 1:53 pm
Location: Toronto, Canada

Re: ohlins porn

Post by leadfoot » Wed Jul 02, 2014 1:21 pm

Being in Toronto... I have to deal with salt on the roads in the winter... I had a purpose built rally car with high end DMS shocks that I made the mistake of using one winter as a daily driver... and it totally ruined the shocks in one winter...

Otherwise... this would be my shock / setup of choice when the DRC fails...

Post Reply

Return to “RS4 (B7 Typ 8E) 2006–2008”

Who is online

Users browsing this forum: No registered users and 111 guests