It's a saloon so hopefully will look something like the picture Rick posted abovem14rrv wrote:i was looking in to these wheels a few weeks ago. but i was gonna go for 20x9 front 20x10.5 rear offsets of 25 and 30 so no spacers needed. thats the set up on the black rs4. then sort rolling radious out with the tyre size. just i use thexcar every day and thought wheels i little to xtreme for eveyday driving
cant wait to see them on. what have you got avant or saloon?
Re: 20 x 10.5's. No going back. Now fitted
Re: 20 x 10.5's now ordered. No going back
B7 RS4 Saloon, Phantom Black, Forge Oil Cooler Kit, 20 x 10.5j Vossens, Carbon Front Splitter, KW V3 Coilovers, Adjustable Front Arms, 20mm Spacers, Revolution Carbon Air Box, Rear 4 Pot Porsche Brake Conversion, Stud & Nut Kit, Milltek Non Res Non Valved Exhaust, RS6 Gloss Black Grill, Slightly Tinted Windows, JH Motorsports Stage 3R Clutch & Lightweight Flywheel, Robnic Braided Clutch Line. JH Motorsports Lightweight Grooved F & R Rotors with Braided Hoses and Hawk Pads
Re: 20 x 10.5's now ordered. No going back
If I'm following you then using spacers should sort the clearance of the suspension? But obviously need more arch work.ArthurPE wrote:oem is 29 ET and 9"
you are using 42 and 10.5?
the new wheel will extend outwards ~ -(42-29) + (10.5-9) * 25.4 / 2 ~ 6 mm, should be fine
inside clearance will be 13 + 19 or 31 mm deeper, most likely will hit the suspension
B7 RS4 Saloon, Phantom Black, Forge Oil Cooler Kit, 20 x 10.5j Vossens, Carbon Front Splitter, KW V3 Coilovers, Adjustable Front Arms, 20mm Spacers, Revolution Carbon Air Box, Rear 4 Pot Porsche Brake Conversion, Stud & Nut Kit, Milltek Non Res Non Valved Exhaust, RS6 Gloss Black Grill, Slightly Tinted Windows, JH Motorsports Stage 3R Clutch & Lightweight Flywheel, Robnic Braided Clutch Line. JH Motorsports Lightweight Grooved F & R Rotors with Braided Hoses and Hawk Pads
Re: 20 x 10.5's now ordered. No going back
this was 10.5 with 8mm spacers on, cant remember the offset now , the tyres wernt stretched so looked very wrong, 10.5 fitted the rear ok.
fronts stuck out too much, and didnt like the wheels once on,
i think you should be ok but it will be a faf
i have another pic of them fitted too, came up on my fb today will post in a sec
fronts stuck out too much, and didnt like the wheels once on,
i think you should be ok but it will be a faf
i have another pic of them fitted too, came up on my fb today will post in a sec
Re: 20 x 10.5's now ordered. No going back
hes most probably on air, but it looks good
Re: 20 x 10.5's now ordered. No going back
I didn't know George Michael had an RS4
RS4 B7, Mugello Blue, K&W V3 & HR ARBs, set up by Centre Gravity, Milltek Valved Non Res & cat bypass pipes, BMC air filter, braided hoses, DOT 5.1, Terraclean, MRC Full Carbon Clean, MRC remap 448PS 477NM, 20" S7 alloys with 4mm spacers & Hawke spigots 66.6 > 57.1, AP Racing front discs. Sold Sept 2019. Now rocking an F80 M3
Re: 20 x 10.5's now ordered. No going back
Rick_RS4 wrote:hes most probably on air, but it looks good
Thanks for the info Rick. Fingers crossed it will all work out.
I've seen the air suspension advertised. I take it that the struts are thinner on air suspension allowing more room for clearance?
B7 RS4 Saloon, Phantom Black, Forge Oil Cooler Kit, 20 x 10.5j Vossens, Carbon Front Splitter, KW V3 Coilovers, Adjustable Front Arms, 20mm Spacers, Revolution Carbon Air Box, Rear 4 Pot Porsche Brake Conversion, Stud & Nut Kit, Milltek Non Res Non Valved Exhaust, RS6 Gloss Black Grill, Slightly Tinted Windows, JH Motorsports Stage 3R Clutch & Lightweight Flywheel, Robnic Braided Clutch Line. JH Motorsports Lightweight Grooved F & R Rotors with Braided Hoses and Hawk Pads
Re: 20 x 10.5's now ordered. No going back
I just don't get it.
Re: 20 x 10.5's now ordered. No going back
This isn't on air, has coil over on it, it has 9j fronts and 10.5 rears, I am going to be ordering theses in a few months so can't wait so my rotors wil be forsale
b7 rs4 avant
Re: 20 x 10.5's now ordered. No going back
Everywhere I've looked says it has 10.5 all round.m14rrv wrote:This isn't on air, has coil over on it, it has 9j fronts and 10.5 rears, I am going to be ordering theses in a few months so can't wait so my rotors wil be forsale
B7 RS4 Saloon, Phantom Black, Forge Oil Cooler Kit, 20 x 10.5j Vossens, Carbon Front Splitter, KW V3 Coilovers, Adjustable Front Arms, 20mm Spacers, Revolution Carbon Air Box, Rear 4 Pot Porsche Brake Conversion, Stud & Nut Kit, Milltek Non Res Non Valved Exhaust, RS6 Gloss Black Grill, Slightly Tinted Windows, JH Motorsports Stage 3R Clutch & Lightweight Flywheel, Robnic Braided Clutch Line. JH Motorsports Lightweight Grooved F & R Rotors with Braided Hoses and Hawk Pads
Re: 20 x 10.5's now ordered. No going back
and indeed you are right! where did i get that from ha well when are they coming? who did you order them off?
b7 rs4 avant
Re: 20 x 10.5's now ordered. No going back
Should arrive early next week. Ordered them from Prestige Wheels in Birmingham.
Will post pictures when I get them
Will post pictures when I get them
B7 RS4 Saloon, Phantom Black, Forge Oil Cooler Kit, 20 x 10.5j Vossens, Carbon Front Splitter, KW V3 Coilovers, Adjustable Front Arms, 20mm Spacers, Revolution Carbon Air Box, Rear 4 Pot Porsche Brake Conversion, Stud & Nut Kit, Milltek Non Res Non Valved Exhaust, RS6 Gloss Black Grill, Slightly Tinted Windows, JH Motorsports Stage 3R Clutch & Lightweight Flywheel, Robnic Braided Clutch Line. JH Motorsports Lightweight Grooved F & R Rotors with Braided Hoses and Hawk Pads
-
- 3rd Gear
- Posts: 415
- Joined: Mon Aug 12, 2013 12:49 am
- Location: London
Re: 20 x 10.5's now ordered. No going back
On the subject of Vossen wheels, cool little vid I watched the other night by them - https://www.youtube.com/watch?v=4Iq8w8Qg-wo
Re: 20 x 10.5's now ordered. No going back
The black Lexus near the end was my favourite
B7 RS4 Saloon, Phantom Black, Forge Oil Cooler Kit, 20 x 10.5j Vossens, Carbon Front Splitter, KW V3 Coilovers, Adjustable Front Arms, 20mm Spacers, Revolution Carbon Air Box, Rear 4 Pot Porsche Brake Conversion, Stud & Nut Kit, Milltek Non Res Non Valved Exhaust, RS6 Gloss Black Grill, Slightly Tinted Windows, JH Motorsports Stage 3R Clutch & Lightweight Flywheel, Robnic Braided Clutch Line. JH Motorsports Lightweight Grooved F & R Rotors with Braided Hoses and Hawk Pads
-
- 4th Gear
- Posts: 548
- Joined: Wed Nov 10, 2010 10:10 pm
- Location: Kernow, near England
Re: 20 x 10.5's now ordered. No going back
He forgot the Max Power Stickers.
2007 B7 RS4 Phantom Black Saloon - stock
Previous: Lightly modded Mondeo ST220 (great car), nothing else worth mentioning!
Previous: Lightly modded Mondeo ST220 (great car), nothing else worth mentioning!
Re: 20 x 10.5's now ordered. No going back
Love that style of vossen wheel on the black RS4?
Mmmm....off on internet for a browse on their website!!
Mmmm....off on internet for a browse on their website!!
RS6 C8 carbon black(merlin)
RS6 C8 launch edition
R8 V10 plus
C7 RS6 PE dynamic pack plus
C7 RS6
Porsche Panamera Turbo
C6 RS6 AVANT
RS4 B7
Golf R32 mk 5
BMW M3 E46
Golf R32 mk 5
Golf GTI mk 5
VW Passat 130d 4 motion
VW bora 150pd
Ford Mondeo Ghia X V6
Ford Focus zetec
Rover 214!!
RS6 C8 launch edition
R8 V10 plus
C7 RS6 PE dynamic pack plus
C7 RS6
Porsche Panamera Turbo
C6 RS6 AVANT
RS4 B7
Golf R32 mk 5
BMW M3 E46
Golf R32 mk 5
Golf GTI mk 5
VW Passat 130d 4 motion
VW bora 150pd
Ford Mondeo Ghia X V6
Ford Focus zetec
Rover 214!!
Who is online
Users browsing this forum: Google [Bot] and 246 guests