Re: 20 x 10.5's. No going back. Now fitted

4.2 V8 32v Naturally Aspirated - 414 bhp
Post Reply
DavidRS4
4th Gear
Posts: 663
Joined: Thu Jan 19, 2012 11:16 am
Location: Colchester

Re: 20 x 10.5's now ordered. No going back

Post by DavidRS4 » Sat Mar 22, 2014 6:39 pm

[youtube][/youtube]
RS6chris! wrote:Love that style of vossen wheel on the black RS4?

Mmmm....off on internet for a browse on their website!!
There's never any prices. You always have to e mail them!
B7 RS4 Saloon, Phantom Black, Forge Oil Cooler Kit, 20 x 10.5j Vossens, Carbon Front Splitter, KW V3 Coilovers, Adjustable Front Arms, 20mm Spacers, Revolution Carbon Air Box, Rear 4 Pot Porsche Brake Conversion, Stud & Nut Kit, Milltek Non Res Non Valved Exhaust, RS6 Gloss Black Grill, Slightly Tinted Windows, JH Motorsports Stage 3R Clutch & Lightweight Flywheel, Robnic Braided Clutch Line. JH Motorsports Lightweight Grooved F & R Rotors with Braided Hoses and Hawk Pads
Top
DavidRS4
4th Gear
Posts: 663
Joined: Thu Jan 19, 2012 11:16 am
Location: Colchester

Re: 20 x 10.5's now ordered. No going back

Post by DavidRS4 » Mon Mar 31, 2014 2:04 pm

Image

Not too much stretch. I'm happy with that.

Image

Image

Bit of concave

Image

Will try and get it booked in to be done over the next couple of weeks. Fingers crossed it'll all turn out ok :mrgreen:
B7 RS4 Saloon, Phantom Black, Forge Oil Cooler Kit, 20 x 10.5j Vossens, Carbon Front Splitter, KW V3 Coilovers, Adjustable Front Arms, 20mm Spacers, Revolution Carbon Air Box, Rear 4 Pot Porsche Brake Conversion, Stud & Nut Kit, Milltek Non Res Non Valved Exhaust, RS6 Gloss Black Grill, Slightly Tinted Windows, JH Motorsports Stage 3R Clutch & Lightweight Flywheel, Robnic Braided Clutch Line. JH Motorsports Lightweight Grooved F & R Rotors with Braided Hoses and Hawk Pads
Top
m14rrv
2nd Gear
Posts: 187
Joined: Mon Apr 26, 2010 8:44 pm
Location: darlington

Re: 20 x 10.5's. No going back. Wheel Pics Pg 3

Post by m14rrv » Mon Mar 31, 2014 7:51 pm

When you putting them on the car?
b7 rs4 avant
Top
Reevesy
1st Gear
Posts: 51
Joined: Sun Jul 28, 2013 5:47 pm

Re: 20 x 10.5's. No going back. Wheel Pics Pg 3

Post by Reevesy » Mon Mar 31, 2014 8:03 pm

Cannot wait to see these fitted :notworthy:
Top
RS6chris!
Cruising
Posts: 3845
Joined: Sun Oct 25, 2009 8:55 pm
Location: North East(Teesside).

Re: 20 x 10.5's. No going back. Wheel Pics Pg 3

Post by RS6chris! » Mon Mar 31, 2014 8:04 pm

Love these wheels in deepest dish flavour!!

Can't wait to see them.
Panamera Turbo S e hybrid (again)
RS6 C8 carbon black(merlin)
Panamera Turbo S e hybrid
RS6 C8 launch edition
R8 V10 plus
C7 RS6 PE dynamic pack plus
C7 RS6
Porsche Panamera Turbo
C6 RS6 AVANT
RS4 B7
Golf R32 mk 5
BMW M3 E46
Golf R32 mk 5
Golf GTI mk 5
VW Passat 130d 4 motion
VW bora 150pd
Ford Mondeo Ghia X V6
Ford Focus zetec
Rover 214!!
Top
User avatar
Covkiller
Top Gear
Posts: 2349
Joined: Fri Mar 28, 2008 3:44 pm
Location: Coventry

Re: 20 x 10.5's. No going back. Wheel Pics Pg 3

Post by Covkiller » Mon Mar 31, 2014 9:06 pm

Hey hey, smart wheels. I can't wait to see them on your car !
:thumbs:
RS4 B7, Mugello Blue, K&W V3 & HR ARBs, set up by Centre Gravity, Milltek Valved Non Res & cat bypass pipes, BMC air filter, braided hoses, DOT 5.1, Terraclean, MRC Full Carbon Clean, MRC remap 448PS 477NM, 20" S7 alloys with 4mm spacers & Hawke spigots 66.6 > 57.1, AP Racing front discs. Sold Sept 2019. Now rocking an F80 M3
Top
Rick_RS4
Cruising
Posts: 2882
Joined: Mon Dec 13, 2010 4:37 pm

Re: 20 x 10.5's. No going back. Wheel Pics Pg 3

Post by Rick_RS4 » Tue Apr 01, 2014 12:38 am

they look great,

hope they fit, you should be fine
Top
DavidRS4
4th Gear
Posts: 663
Joined: Thu Jan 19, 2012 11:16 am
Location: Colchester

Re: 20 x 10.5's. No going back. Wheel Pics Pg 3

Post by DavidRS4 » Tue Apr 01, 2014 12:26 pm

Thanks guys, hoping to get it booked in for next week to get sorted. :biggrin3:
B7 RS4 Saloon, Phantom Black, Forge Oil Cooler Kit, 20 x 10.5j Vossens, Carbon Front Splitter, KW V3 Coilovers, Adjustable Front Arms, 20mm Spacers, Revolution Carbon Air Box, Rear 4 Pot Porsche Brake Conversion, Stud & Nut Kit, Milltek Non Res Non Valved Exhaust, RS6 Gloss Black Grill, Slightly Tinted Windows, JH Motorsports Stage 3R Clutch & Lightweight Flywheel, Robnic Braided Clutch Line. JH Motorsports Lightweight Grooved F & R Rotors with Braided Hoses and Hawk Pads
Top
Rick_RS4
Cruising
Posts: 2882
Joined: Mon Dec 13, 2010 4:37 pm

Re: 20 x 10.5's. No going back. Wheel Pics Pg 3

Post by Rick_RS4 » Tue Apr 01, 2014 6:01 pm

DavidRS4 wrote:Thanks guys, hoping to get it booked in for next week to get sorted. :biggrin3:

id be outside now with a jack, test fitting to see if they scrub the engine block
Top
DavidRS4
4th Gear
Posts: 663
Joined: Thu Jan 19, 2012 11:16 am
Location: Colchester

Re: 20 x 10.5's. No going back. Wheel Pics Pg 3

Post by DavidRS4 » Tue Apr 01, 2014 6:36 pm

Rick_RS4 wrote:
DavidRS4 wrote:Thanks guys, hoping to get it booked in for next week to get sorted. :biggrin3:

id be outside now with a jack, test fitting to see if they scrub the engine block
I'm patient and they are having custom spacers made so the clearance issue can be addressed. Then the body shop will do the arches.

Besides I'm busy training for cycling John O Groats to Lands End in May. Doing 44 mile a day at the moment.
B7 RS4 Saloon, Phantom Black, Forge Oil Cooler Kit, 20 x 10.5j Vossens, Carbon Front Splitter, KW V3 Coilovers, Adjustable Front Arms, 20mm Spacers, Revolution Carbon Air Box, Rear 4 Pot Porsche Brake Conversion, Stud & Nut Kit, Milltek Non Res Non Valved Exhaust, RS6 Gloss Black Grill, Slightly Tinted Windows, JH Motorsports Stage 3R Clutch & Lightweight Flywheel, Robnic Braided Clutch Line. JH Motorsports Lightweight Grooved F & R Rotors with Braided Hoses and Hawk Pads
Top
User avatar
kd
3rd Gear
Posts: 290
Joined: Thu Dec 13, 2007 7:46 pm
Location: London

Re: 20 x 10.5's. No going back. Wheel Pics Pg 3

Post by kd » Tue Apr 01, 2014 7:45 pm

One of my favourite wheels for the RS4 and fair play to you for trying to make it work. Look forward to seeing pictures of them. That really is patience which I admit to having a lack of if those wheels were in my possession :-)
Top
Rick_RS4
Cruising
Posts: 2882
Joined: Mon Dec 13, 2010 4:37 pm

Re: 20 x 10.5's. No going back. Wheel Pics Pg 3

Post by Rick_RS4 » Mon Apr 21, 2014 2:31 pm

soooooo??
Top
User avatar
Bladerider
4th Gear
Posts: 516
Joined: Mon Nov 28, 2005 3:49 pm
Location: Speedfreak County !!
Contact:
Contact Bladerider

Re: 20 x 10.5's. No going back. Wheel Pics Pg 3

Post by Bladerider » Tue Apr 22, 2014 5:33 pm

Hurry up weaksauce !!

:D :D :D

J.
07 RS4 Avus Avant : Usual spec with Buckets+FBSW+iPod dock+TV etc...100k+
Thanks to GBH Motorsport MRC Tuning VirdeeAuto Dubstep AwesomeGTI Wallachie Trups
H&R - Coilovers ARBs Spacers : 034 - RearArms Droplinks BilletMounts StrutTops : Eibach FrontArms : Powerflex Bushes
MRC - Stage2 Map+codeouts Stage2 Inlet+7mm gasket Stage2 deCarbon CAF : BMC Filter : Milltek Decats NonRes
Anthracite Alloys : Advan Neovas : Ferodo Pads+Castrol SRF : HEL Brakelines : Trups LED lighting
Top
DavidRS4
4th Gear
Posts: 663
Joined: Thu Jan 19, 2012 11:16 am
Location: Colchester

Re: 20 x 10.5's. No going back. Wheel Pics Pg 3

Post by DavidRS4 » Tue Apr 22, 2014 8:14 pm

Dropped it off last Wednesday evening. Nothing will have been done over the Bank Holiday weekend. Hopefully have started on it today. I'm away till Thursday evening so may pop in there on Friday to see if there's any progress.

I do wonder how long it may be in the bodyshop for depending on the work required
B7 RS4 Saloon, Phantom Black, Forge Oil Cooler Kit, 20 x 10.5j Vossens, Carbon Front Splitter, KW V3 Coilovers, Adjustable Front Arms, 20mm Spacers, Revolution Carbon Air Box, Rear 4 Pot Porsche Brake Conversion, Stud & Nut Kit, Milltek Non Res Non Valved Exhaust, RS6 Gloss Black Grill, Slightly Tinted Windows, JH Motorsports Stage 3R Clutch & Lightweight Flywheel, Robnic Braided Clutch Line. JH Motorsports Lightweight Grooved F & R Rotors with Braided Hoses and Hawk Pads
Top
Rick_RS4
Cruising
Posts: 2882
Joined: Mon Dec 13, 2010 4:37 pm

Re: 20 x 10.5's. No going back. Wheel Pics Pg 3

Post by Rick_RS4 » Tue Apr 22, 2014 9:41 pm

DavidRS4 wrote:Dropped it off last Wednesday evening. Nothing will have been done over the Bank Holiday weekend. Hopefully have started on it today. I'm away till Thursday evening so may pop in there on Friday to see if there's any progress.

I do wonder how long it may be in the bodyshop for depending on the work required



what bodywrk do you think it will need, flaring the arches even more? providing the right offset they cant be that bbad as they have been fitted to that other one and that doesnt look mullered.
Top
Post Reply

Return to “RS4 (B7 Typ 8E) 2006–2008”

Who is online

Users browsing this forum: Bing [Bot], Google [Bot] and 112 guests