
B7 RS4 Picture Thread
Re: B7 RS4 Picture Thread
Amazing pictures RichieRS & gorgeous car 

I think the way forward is the felt-spec double-bluff!
Re: B7 RS4 Picture Thread
RichieRS - your car looks fab. Love the stance. What suspension setup are you running?
And are those matt black headlights?
And are those matt black headlights?
Daytona RS4 Avant - black optics/decat downpipes/H-pipe/KW springs - featured on the 2012 Audi stand at the Goodwood FoS
Re: B7 RS4 Picture Thread
Cheerss3_irl wrote:Amazing pictures RichieRS & gorgeous car

Cheersmaars wrote:RichieRS - your car looks fab. Love the stance. What suspension setup are you running?
And are those matt black headlights?

I am on H+R springs currently but looking to move to Coilovers shortly as I have some 20"s ready to go on and I want to drop it down a touch more. Also running on 8mm (front) and 10mm (rear) spacers.
The headlights have literally had the inner chrome surround painted black. I know a few people have painted all the chrome internals black which looks awesome!!.
Re: B7 RS4 Picture Thread
[quote="zooyorker90"]Here is mine. I was looking for a low mileage deep green pearl one specifically, dark green is my favourite colour on any car. Took a while, as you can imagine. Probably because everyone hates dark green and only very few were ordered in this colour! All I did was put black optics on it (including satin black mirrors and titanium wheels) and an HMS exhaust (had it on my previous one also, sounds amazing).
Enjoy

Lovely! I'm based in Basel and have a Daytona grey RS4 with black alloys- don't suppose you'd be interested in a wheel swap? I don't like black wheels on my cars!!!!
The small front numberplate are so good on the RS4, makes them look so aggressive!
Enjoy


Lovely! I'm based in Basel and have a Daytona grey RS4 with black alloys- don't suppose you'd be interested in a wheel swap? I don't like black wheels on my cars!!!!
The small front numberplate are so good on the RS4, makes them look so aggressive!
Re: B7 RS4 Picture Thread
Very nice!
Where did you get your number plate plinth from bud it doesn't have the standard plate recess?
Where did you get your number plate plinth from bud it doesn't have the standard plate recess?
RS4 B7
MRC stage2 436ps-487nm
Revolution intake, custom CAF, carbon clean, deflaped manifold, JHM manifold spacers, Forge oil cooler, Forge spacers, full de-cat, Scorpion cat back, Trup's LED's, 20' S5 wheels, KW V3's.
Launch control & flat shift
MRC stage2 436ps-487nm
Revolution intake, custom CAF, carbon clean, deflaped manifold, JHM manifold spacers, Forge oil cooler, Forge spacers, full de-cat, Scorpion cat back, Trup's LED's, 20' S5 wheels, KW V3's.
Launch control & flat shift

Re: B7 RS4 Picture Thread
Here's my baby, got me a new reg for it and a Milltek exhaust. Very happy with the car!
Will get some more pics if it ever stops f__king raining.

Will get some more pics if it ever stops f__king raining.


Re: B7 RS4 Picture Thread
Been snooping around and sniffing out all the good tips, guess it's time to post a pic of my new-to-me 2007 RS4. Fresh from driving home the first time.
B7 RS4 Sedan, Phantom Black Pearl
Valved non-resonated Milltek with 200-cell DPs, and JHM tune, 10mm spacers
B8.5 Allroad, Monsoon Grey
CPO, stock
Former Quattros
B5 S4 Sedan, C4 S6 Avant, Type 89 Coupe Quattro, Type 44 Quattro Sedan
Valved non-resonated Milltek with 200-cell DPs, and JHM tune, 10mm spacers
B8.5 Allroad, Monsoon Grey
CPO, stock
Former Quattros
B5 S4 Sedan, C4 S6 Avant, Type 89 Coupe Quattro, Type 44 Quattro Sedan
-
- 2nd Gear
- Posts: 182
- Joined: Sun Jun 21, 2015 5:33 pm
Re: B7 RS4 Picture Thread
Congrats, nice ride and welcome to the family!
Re: B7 RS4 Picture Thread
This is one of the standard number plate holders we get in Switzerland (front plates are much smaller here)TAB1S wrote:Very nice!
Where did you get your number plate plinth from bud it doesn't have the standard plate recess?
Part number (outer part) is 8EO 807 285 AS assuming you have the parking sensors (...285 AR if not I think). You don't really see them for sale online really; but I'm sure the dealers in Switzerland are likely to have the odd one knocking about- I'm after a spare to try to make one from carbon fibre...
Re: B7 RS4 Picture Thread
RS4 B7, Mugello Blue, K&W V3 & HR ARBs, set up by Centre Gravity, Milltek Valved Non Res & cat bypass pipes, BMC air filter, braided hoses, DOT 5.1, Terraclean, MRC Full Carbon Clean, MRC remap 448PS 477NM, 20" S7 alloys with 4mm spacers & Hawke spigots 66.6 > 57.1, AP Racing front discs. Sold Sept 2019. Now rocking an F80 M3
Re: B7 RS4 Picture Thread
Thanks alot Whitean3whitean3 wrote:This is one of the standard number plate holders we get in Switzerland (front plates are much smaller here)TAB1S wrote:Very nice!
Where did you get your number plate plinth from bud it doesn't have the standard plate recess?
Part number (outer part) is 8EO 807 285 AS assuming you have the parking sensors (...285 AR if not I think). You don't really see them for sale online really; but I'm sure the dealers in Switzerland are likely to have the odd one knocking about- I'm after a spare to try to make one from carbon fibre...

I'm in need of a new 1 as I'm sure your aware are uk reseses are massive so just looking into some different options.
Thanks agin
RS4 B7
MRC stage2 436ps-487nm
Revolution intake, custom CAF, carbon clean, deflaped manifold, JHM manifold spacers, Forge oil cooler, Forge spacers, full de-cat, Scorpion cat back, Trup's LED's, 20' S5 wheels, KW V3's.
Launch control & flat shift
MRC stage2 436ps-487nm
Revolution intake, custom CAF, carbon clean, deflaped manifold, JHM manifold spacers, Forge oil cooler, Forge spacers, full de-cat, Scorpion cat back, Trup's LED's, 20' S5 wheels, KW V3's.
Launch control & flat shift

- Robnic
- 3rd Gear
- Posts: 285
- Joined: Sat May 04, 2013 6:19 pm
- Location: North Lincs., DN17 4JW
- Contact:
Re: B7 RS4 Picture Thread
Hi,
Same as TAB1S I'm after a smooth front number plate plinth with the parking sensors, does the Swedish version part number you refer to have a cut out (piece missing) where the small number plate fits?
If so it is a fully smooth one I'm after with parking sensor holes don't mind if it has the upper and lower strips, I have the smooth US one (with strips) but they - or the type I have - has no park sensor holes
Rob
Same as TAB1S I'm after a smooth front number plate plinth with the parking sensors, does the Swedish version part number you refer to have a cut out (piece missing) where the small number plate fits?
If so it is a fully smooth one I'm after with parking sensor holes don't mind if it has the upper and lower strips, I have the smooth US one (with strips) but they - or the type I have - has no park sensor holes
Rob
B7 RS4 MTM K540 Sprint loon, Lysholm/Opcon twin-screw supercharger, Ceramics, HEL Hoses, Loba SM Fly, Sachs performance clutch kit, MTM full stainless exhaust system with freeflow cats & quad valved tailpipes, Hotchkis ARB's, Bilstein B16 Coil Overs, LED Rear lights, Interior & LED 50W DRL's, Buckets in race cloth, Black optics, FBSW, Titanium pack, Solar Sunroof, Adaptive lights, MTM 10mm spacers Fr & Rr, 193 Nav unit, 2nd careful owner 

Re: B7 RS4 Picture Thread
Info on what size tires you are running with these? Also, are they 19's? Asking as I am considering a set of SPF's for my breadvan and they look great on your setup.RS4eddie wrote:few more snaps...
'06 RS4 B7 Avant - Mugello Blue
Re: B7 RS4 Picture Thread
Glacier White 2017 S3 Saloon with all the Tech.
Gone but not forgotten - B7 RS4 Saloon Black - H&R spacers, Tints, Gun Metal Alloys, MRC Stage 2, Pre Cats, Milltek Non Res, K/W Springs, MRC Full Carbon clean - 431ps
previous - B6 A4 1.8T S-Line 215PS
Gone but not forgotten - B7 RS4 Saloon Black - H&R spacers, Tints, Gun Metal Alloys, MRC Stage 2, Pre Cats, Milltek Non Res, K/W Springs, MRC Full Carbon clean - 431ps
previous - B6 A4 1.8T S-Line 215PS
Who is online
Users browsing this forum: Majestic-12 [Bot] and 101 guests