Exhaust flexi joints wearing

4.2 V8 32v Naturally Aspirated - 414 bhp
Post Reply
irn_bru_ce
2nd Gear
Posts: 186
Joined: Sun Jun 15, 2014 7:58 pm
Location: Aberdeen

Exhaust flexi joints wearing

Post by irn_bru_ce » Mon Aug 21, 2017 8:06 pm

Just doing my oil change today and I noticed the flexi joints have obviously rubbed on speed humps over the years and looking a bit hairy.

Has anybody else had them repaired , or is it a downpipe replacement only job?
Current - 07 Avus Silver B7 RS4 Avant : Ceramics, Non Valved Non Res Milltek, K&N filter, SS+, adaptive xenons, black optics, KW3, 034 rear ARB, rear drop links & front adjustable top arms.
Past - 00 Saxo VTS : 266mm Mi16 calipers, Quaife ATB, 20mm torsions bars, 24mm ARB, Vibratechnics mounts
87 Vauxhall Belmont: 1.6L, 15" rockford fosgate subwoofer in 3 cuft sealed box, 5ch Rockford fosate amp, JBL components
Top
User avatar
CharlieD
2nd Gear
Posts: 160
Joined: Fri Sep 12, 2014 2:53 am

Re: Exhaust flexi joints wearing

Post by CharlieD » Mon Aug 21, 2017 8:10 pm

Hmm I'd also like to know this
RS4 B7 Phantom Black Saloon
[ MRC Stage 2 Map w/ LC/FS @ 440 PS ] : [ TubiStyle Exhaust ] : [ Milltek Decat Downpipes ] : [ Deflapped Manifold ] : [ Cold Air Feed ] : [ Revo/Pipercross CF Induction ] : [ H&R ARBs Front+Rear ]
[ Forged Rotor RS5.0 OEM+ 20x10.5 ] : [ AccuAir Airlift Performance + e-Level Mgmt ] : [ Wrapped in 3M Black Rose ]

Build Thread
Top
User avatar
SimonS4MTM
Top Gear
Posts: 2314
Joined: Thu May 29, 2003 2:40 pm
Location: Norfolk
Contact:
Contact SimonS4MTM

Re: Exhaust flexi joints wearing

Post by SimonS4MTM » Mon Aug 21, 2017 8:15 pm

Had this on my old B5. My local garage ordered in some new flexi sections and welded them in for me. Cost around £150 for both I think. I left them for a good few years in the hairy state, and only changed them when they started blowing.
| RS4 - B7 | Phantom Black | Seit 2017 |
| S4 - B5 | Ebony Black | Seit 2002 |
Top
User avatar
MikeFish
Cruising
Posts: 15588
Joined: Tue Aug 31, 2010 9:23 pm
Location: The Middle of Somewhere

Re: Exhaust flexi joints wearing

Post by MikeFish » Mon Aug 21, 2017 8:25 pm

I asked MRC about mine and they said there was no issue with them as they were and left them.
Top
rs user
4th Gear
Posts: 694
Joined: Tue Jan 07, 2014 5:01 pm

Re: Exhaust flexi joints wearing

Post by rs user » Mon Aug 21, 2017 8:32 pm

i"ve had two rs4-both the same-hairy mary flexis...
Top
User avatar
R-S-4
2nd Gear
Posts: 211
Joined: Fri Mar 03, 2017 7:57 pm

Re: Exhaust flexi joints wearing

Post by R-S-4 » Tue Aug 22, 2017 9:24 am

i had mine changed 2 weeks ago, £180 each...

i no longer need mine so maybe able to sell you mine for a decent offer if your still after some ? mine are literally 2 weeks old but used for only a week as the car hasnt been used much since they were fitted. I will have to confirm i still have them though, will check by tonight.

Or maybe someone else would like these ?
Sprint blue, Stage 2 Re-Mapp, Milltek Cat Back Non Valves Non Resinated, De Catted, Overrun/Downshift Crackle, DeFlapped, Performance Filter, H & R front & rear roll bars, bored out manifold ports, bilstein coilovers, 15mm spacers all round, 20" 3DSM wheels 10j, Carbon front splitter & rear diffuser, window tints rear 5% - rear side 20% - side 35%.
Top
Post Reply

Return to “RS4 (B7 Typ 8E) 2006–2008”

Who is online

Users browsing this forum: No registered users and 106 guests