B7 RS4 Picture Thread

[rob-s]

Heh heh, thanks I guess

I targetted to have the gaps app. the same size as at the sides of the bonnet (bonnet - front fenders)

Here instructions with pics:

http://www.audizine.com/forum/showthrea ... r-removal)

[marc1]

^ good man.

[Brooner]

you can do this with out removing the bumper but i cant find the thread as some one did do a picture guide for locating the adjusters

[RSCosworth]

you can do this with out removing the bumper but i cant find the thread as some one did do a picture guide for locating the adjusters

Now that I would be interested in!!!

[Brooner]

The above guide shows you at the start the adjuster location so all you need is a drive to fit and an extension to reach in and do some small tweeks to the bumper gap again this will only do a mall adjustment but i would think it should be enough to tighten up the gaps ive seen so far on this thread

[Harris.]

Mine so far , the front and rear badges are now black along with the wheels

[RSCosworth]

The above guide shows you at the start the adjuster location so all you need is a drive to fit and an extension to reach in and do some small tweeks to the bumper gap again this will only do a mall adjustment but i would think it should be enough to tighten up the gaps ive seen so far on this thread

Reading the follow up posts to the original guide in the link above though leads you to believe that the bumper DOES need to be removed in order to adjust it...

[Brooner]

yes but few guy on here have previously made slight adjustments with the bumper in situ at the moment there names escape me i think TonyHayers was one
just fond this thread confirming the adjustment in situ

viewtopic.php?f=35&t=89890&start=30

so you just keep tightening the screw and the bottom adjuster will raise up

[toyneg]

from my trip to the Ring this month

[RichieRS]

from my trip to the Ring this month

Cracking pic. Looks like you were "avin it" around that corner

[s3_irl]

great picture !. What was the rs4 around the 'Ring like ?

[RSCosworth]

yes but few guy on here have previously made slight adjustments with the bumper in situ at the moment there names escape me i think TonyHayers was one
just fond this thread confirming the adjustment in situ

viewtopic.php?f=35&t=89890&start=30

so you just keep tightening the screw and the bottom adjuster will raise up

Top man, will be giving this a go with mine when I get a bit of spare time (which doesn't come often with a 6 month old baby!)

[toyneg]

great picture !. What was the rs4 around the 'Ring like ?

was awesome thanks especially in the wet!!

[Jotter]

I think this is the first proper photo of mine on here, been a member for a while and been through a lot! Slowly getting there as i want to do a few more little bits but heres mine:

[nutter69]

They the SPF?