New Alloys :)

4.2 V8 32v Naturally Aspirated - 414 bhp
P_G
Cruising
Posts: 8249
Joined: Sun Jul 09, 2006 1:25 pm
Location: Newcastle upon Tyne

Re: New Alloys :)

Post by P_G » Wed Aug 29, 2012 7:26 pm

AdrianD wrote:
P_G wrote:Get those exhausts cleaned man! :bigblink:
lol you do realise they're Black Optic tips don't you? ;-), seriously though the whole car is filthy but thankfully doesn't show too much in the pic! We've had stupid amounts of rain these last couple of days.. good weather forecast for tomorrow so it'll be clean again soon :)
Yep but they are way blacker on the inside than the out. It makes the outer look just dirty which balck optice look decent when cleaned up.

BruceBanner
1st Gear
Posts: 66
Joined: Tue May 17, 2011 9:36 pm

Re: New Alloys :)

Post by BruceBanner » Thu Aug 30, 2012 8:18 am

Just simply, WOW!!

User avatar
sonny
Cruising
Posts: 10278
Joined: Wed Nov 14, 2007 1:30 am
Location: Kent

New Alloys :)

Post by sonny » Thu Aug 30, 2012 8:38 am

They defiantly suit the car well.

Has it effected the ride much?
Money can't buy you love, but it can buy you a well sorted racecar

slowmonkey
2nd Gear
Posts: 214
Joined: Wed Aug 15, 2012 9:26 am

Re: New Alloys :)

Post by slowmonkey » Thu Aug 30, 2012 9:36 am

AdrianD wrote:Thanks guys
slowmonkey wrote:very nice indeed, what tyre sizes and offset did you go for ?
They're 155x30x20. The offset is an ET30 but i still have the 10 / 8mm spacers fitted...
Ok thanks, assume you meant 255 !! What about the load rating on the tyres, I understand it's tricky to get the right rating on the 20" tyres. Which make and model tyres are they ?
Image
| 2007 Daytona Avant | Buckets | 20" BBS CK's | H&R Coilovers | Valved Milltek res | hole in the fuel tank|

User avatar
AdrianD
4th Gear
Posts: 693
Joined: Mon Dec 12, 2011 7:33 pm

Re: New Alloys :)

Post by AdrianD » Thu Aug 30, 2012 12:46 pm

they are Yokohama Advan Sport 255x30x20 92Y XL....

You have me concerned now, i have sent an email to Yokahama asking them to confirm that they're suitable....
2010 911 Turbo PDK.
Gone but not forgotten... Sprint Blue B7 RS4 with all the toys :)
20" AG M310's | TTS Supercharged | MRC Stage 3 | Sach's Clutch | Lightened / balanced flywheel | High Pressure Fuel Pumps | KW V3's Coilovers | De-Cat + Valved Milltek | DeCoked | Launch Control | Flat Shift | Cold Air Feed Induction.

slowmonkey
2nd Gear
Posts: 214
Joined: Wed Aug 15, 2012 9:26 am

Re: New Alloys :)

Post by slowmonkey » Thu Aug 30, 2012 12:59 pm

So don't take it from me as I'm new round here :wink:

I've just seen some old information that said the load rating had to be 96, but I don't have concrete info on this.

What is the load rating on the 19" wheel with an OEM tyre ?
Image
| 2007 Daytona Avant | Buckets | 20" BBS CK's | H&R Coilovers | Valved Milltek res | hole in the fuel tank|

User avatar
AdrianD
4th Gear
Posts: 693
Joined: Mon Dec 12, 2011 7:33 pm

Re: New Alloys :)

Post by AdrianD » Thu Aug 30, 2012 1:04 pm

The research i've done this morning following your post shows that pretty much all 20" tyres are 92Y, including Michelin etc... As RS6's run 20's as OEM what rating are their tyres?
2010 911 Turbo PDK.
Gone but not forgotten... Sprint Blue B7 RS4 with all the toys :)
20" AG M310's | TTS Supercharged | MRC Stage 3 | Sach's Clutch | Lightened / balanced flywheel | High Pressure Fuel Pumps | KW V3's Coilovers | De-Cat + Valved Milltek | DeCoked | Launch Control | Flat Shift | Cold Air Feed Induction.

slowmonkey
2nd Gear
Posts: 214
Joined: Wed Aug 15, 2012 9:26 am

Re: New Alloys :)

Post by slowmonkey » Thu Aug 30, 2012 1:09 pm

From Wikipedia.............. for the C6 RS6

Standard wheels (in the UK) are 9.5Jx20-inch '5-segment-spoke' design alloy wheels running on 275/35 ZR20 102Y XL (eXtra Load) tyres (rated at 850 kilograms (1,874 lb) per tyre), with official supplies being either Pirelli P-Zero Rosso or Dunlop SP SportMaxx GT

and for the B7 RS4

In the UK and Japan, the standard wheels are 19 inch alloy wheels (9Jx19" ET29 "7-arm double spoke") with 255/35 ZR19 96Y XL (eXtraLoad) high performance tyres
Image
| 2007 Daytona Avant | Buckets | 20" BBS CK's | H&R Coilovers | Valved Milltek res | hole in the fuel tank|

bam_bam
Cruising
Posts: 14440
Joined: Mon Jan 18, 2010 9:08 pm
Location: London

Re: New Alloys :)

Post by bam_bam » Thu Aug 30, 2012 1:15 pm

Reason being the '6 has the space to run 35 profile in 20s (275/35 ZR20).
No matter where you go, there you are.

User avatar
nij
4th Gear
Posts: 541
Joined: Tue Sep 14, 2010 3:44 pm
Location: Newcastle

Re: New Alloys :)

Post by nij » Thu Aug 30, 2012 1:54 pm

AdrianD wrote:The research i've done this morning following your post shows that pretty much all 20" tyres are 92Y, including Michelin etc... As RS6's run 20's as OEM what rating are their tyres?
That's the reason I've went for 265/30 ZR 20 94Y XL. I couldn't find any tyres with 96Y load rating either!
Phantom Black R8 V10 plus, Capristo Exhaust
Phantom Black (B7) RS4 Saloon, MRC Stage 2
Mercedes E-Coupe 350CDi

User avatar
Rory
2nd Gear
Posts: 102
Joined: Mon Aug 20, 2012 2:59 pm

New Alloys :)

Post by Rory » Thu Aug 30, 2012 3:52 pm

They look very similar to the VMR 710 - I like them a lot - great purchase!

Post Reply

Return to “RS4 (B7 Typ 8E) 2006–2008”

Who is online

Users browsing this forum: Google Adsense [Bot] and 108 guests